Назад к моделям Назад к профилю модели

codegemma:7b | RAG on

05_dft_testability / task_50 | scan_reg8

benchmarkilyasov
task_idilyasov/05_dft_testability/task_50
samples_total10
final_success_samples0
final_success_rate_samples0.0%
functional_pass_rate_samples0.0%
synth_pass_rate_samples0.0%
source_runsrun_20260425_215014_451219_c08f66

Что показывает эта страница

Здесь перечислены все реальные попытки этой модели на одной задаче. По каждой попытке можно увидеть, до какой стадии она дошла, где именно сломалась и какое сообщение об ошибке вернулось из syntax, functional или synthesis.

Samples

sample run extract_ok syntax_ok functional_ok openlane_ok final_success failure_stage failure_reason details
sample_1 run_20260425_215014_451219_c08f66 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR: asynchronous reset did not clear the scan register.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\codegemma-7b\rag_on\benchmarks\ilyasov\tasks\ilyasov__05_dft_testability__task_50\samples\run_20260425_215014_451219_c08f66__sample_1
generated.v preview 
module scan_reg8(
    input clk, rst_n, scan_en, scan_in, load_en,
    input [7:0] data_in,
    output reg [7:0] data_out,
    output reg scan_out
);

    reg [7:0] reg_val;
    integer i;

    always @(posedge clk) begin
        if (rst_n == 0) begin
            data_out <= 0;
            scan_out <= 0;
            reg_val <= 0;
        end else begin
            if (scan_en == 0) begin
                if (load_en == 1) begin
                    reg_val <= data_in;
                    data_out <= reg_val;
                end
            end else begin
                scan_out <= data_out[7];
                data_out <= {data_out[6:0], scan_in};
            end
        end
    end

endmodule
functional details 
[stdout]
ERROR: asynchronous reset did not clear the scan register.
ERROR: functional load failed. Expected A5, got 00
ERROR: register did not hold value in functional mode.
ERROR: wrong first shifted-out bit. Expected 1, got 0
ERROR: wrong third shifted-out bit. Expected 1, got 0
ERROR: wrong sixth shifted-out bit. Expected 1, got 0
ERROR: wrong eighth shifted-out bit. Expected 1, got 0
ERROR: functional recovery after scan mode failed. Expected 5A, got a5
TEST_FAILED
/workspace/banchmarks/pashencev/05_dft_testability/task_50/tb.v:159: $finish called at 126000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR: asynchronous reset did not clear the scan register.",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_2 run_20260425_215014_451219_c08f66 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR: asynchronous reset did not clear the scan register.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\codegemma-7b\rag_on\benchmarks\ilyasov\tasks\ilyasov__05_dft_testability__task_50\samples\run_20260425_215014_451219_c08f66__sample_2
generated.v preview 
module scan_reg8(
    input clk, rst_n, scan_en, scan_in, load_en,
    input [7:0] data_in,
    output reg [7:0] data_out,
    output reg scan_out
);

    reg [7:0] reg_out;

    always @(posedge clk) begin
        if (rst_n == 0) begin
            data_out <= 0;
            scan_out <= 0;
            reg_out <= 0;
        end else begin
            if (scan_en == 0) begin
                if (load_en == 1) begin
                    data_out <= data_in;
                    reg_out <= data_in;
                end else begin
                    data_out <= reg_out;
                end
            end else begin
                scan_out <= data_out[7];
                data_out <= {data_out[6:0], scan_in};
            end
        end
    end

endmodule
functional details 
[stdout]
ERROR: asynchronous reset did not clear the scan register.
TEST_FAILED
/workspace/banchmarks/pashencev/05_dft_testability/task_50/tb.v:159: $finish called at 126000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR: asynchronous reset did not clear the scan register.",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_3 run_20260425_215014_451219_c08f66 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR: asynchronous reset did not clear the scan register.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\codegemma-7b\rag_on\benchmarks\ilyasov\tasks\ilyasov__05_dft_testability__task_50\samples\run_20260425_215014_451219_c08f66__sample_3
generated.v preview 
module scan_reg8(
    input clk, rst_n, scan_en, scan_in, load_en,
    input [7:0] data_in,
    output reg [7:0] data_out,
    output reg scan_out
);

    reg [7:0] reg_out;

    always @(posedge clk) begin
        if (rst_n == 0) begin
            data_out <= 0;
            scan_out <= 0;
            reg_out <= 0;
        end else begin
            if (scan_en == 0) begin
                if (load_en == 1) begin
                    data_out <= data_in;
                    reg_out <= data_in;
                end else begin
                    data_out <= reg_out;
                end
            end else begin
                scan_out <= data_out[7];
                data_out <= {data_out[6:0], scan_in};
            end
        end
    end

endmodule
functional details 
[stdout]
ERROR: asynchronous reset did not clear the scan register.
TEST_FAILED
/workspace/banchmarks/pashencev/05_dft_testability/task_50/tb.v:159: $finish called at 126000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR: asynchronous reset did not clear the scan register.",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_4 run_20260425_215014_451219_c08f66 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR: asynchronous reset did not clear the scan register.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\codegemma-7b\rag_on\benchmarks\ilyasov\tasks\ilyasov__05_dft_testability__task_50\samples\run_20260425_215014_451219_c08f66__sample_4
generated.v preview 
module scan_reg8(
    input clk, rst_n, scan_en, scan_in, load_en,
    input [7:0] data_in,
    output reg [7:0] data_out,
    output reg scan_out
);

    reg [7:0] reg_out;

    always @(posedge clk) begin
        if (rst_n == 0) begin
            data_out <= 0;
            scan_out <= 0;
            reg_out <= 0;
        end else begin
            if (scan_en == 0) begin
                if (load_en == 1) begin
                    data_out <= data_in;
                    reg_out <= data_in;
                end else begin
                    data_out <= reg_out;
                end
            end else begin
                scan_out <= data_out[7];
                data_out <= {data_out[6:0], scan_in};
            end
        end
    end

endmodule
functional details 
[stdout]
ERROR: asynchronous reset did not clear the scan register.
TEST_FAILED
/workspace/banchmarks/pashencev/05_dft_testability/task_50/tb.v:159: $finish called at 126000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR: asynchronous reset did not clear the scan register.",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_5 run_20260425_215014_451219_c08f66 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR: asynchronous reset did not clear the scan register.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\codegemma-7b\rag_on\benchmarks\ilyasov\tasks\ilyasov__05_dft_testability__task_50\samples\run_20260425_215014_451219_c08f66__sample_5
generated.v preview 
module scan_reg8(
    input clk, rst_n, scan_en, scan_in, load_en,
    input [7:0] data_in,
    output reg [7:0] data_out,
    output reg scan_out
);

    reg [7:0] reg_out;

    always @(posedge clk) begin
        if (rst_n == 0) begin
            data_out <= 0;
            scan_out <= 0;
            reg_out <= 0;
        end else begin
            if (scan_en == 0) begin
                if (load_en == 1) begin
                    data_out <= data_in;
                    reg_out <= data_in;
                end else begin
                    data_out <= reg_out;
                end
            end else begin
                scan_out <= data_out[7];
                data_out <= {data_out[6:0], scan_in};
            end
        end
    end

endmodule
functional details 
[stdout]
ERROR: asynchronous reset did not clear the scan register.
TEST_FAILED
/workspace/banchmarks/pashencev/05_dft_testability/task_50/tb.v:159: $finish called at 126000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR: asynchronous reset did not clear the scan register.",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_6 run_20260425_215014_451219_c08f66 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR: asynchronous reset did not clear the scan register.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\codegemma-7b\rag_on\benchmarks\ilyasov\tasks\ilyasov__05_dft_testability__task_50\samples\run_20260425_215014_451219_c08f66__sample_6
generated.v preview 
module scan_reg8(
    input clk, rst_n, scan_en, scan_in, load_en,
    input [7:0] data_in,
    output reg [7:0] data_out,
    output reg scan_out
);

    reg [7:0] reg_out;

    always @(posedge clk) begin
        if (rst_n == 0) begin
            data_out <= 0;
            scan_out <= 0;
            reg_out <= 0;
        end else begin
            if (scan_en == 0) begin
                if (load_en == 1) begin
                    data_out <= data_in;
                    reg_out <= data_in;
                end else begin
                    data_out <= reg_out;
                end
            end else begin
                scan_out <= data_out[7];
                data_out <= {data_out[6:0], scan_in};
            end
        end
    end

endmodule
functional details 
[stdout]
ERROR: asynchronous reset did not clear the scan register.
TEST_FAILED
/workspace/banchmarks/pashencev/05_dft_testability/task_50/tb.v:159: $finish called at 126000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR: asynchronous reset did not clear the scan register.",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_7 run_20260425_215014_451219_c08f66 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR: asynchronous reset did not clear the scan register.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\codegemma-7b\rag_on\benchmarks\ilyasov\tasks\ilyasov__05_dft_testability__task_50\samples\run_20260425_215014_451219_c08f66__sample_7
generated.v preview 
module scan_reg8(
    input clk, rst_n, scan_en, scan_in, load_en,
    input [7:0] data_in,
    output reg [7:0] data_out,
    output reg scan_out
);

    reg [7:0] reg_out;

    always @(posedge clk) begin
        if (rst_n == 0) begin
            data_out <= 0;
            scan_out <= 0;
            reg_out <= 0;
        end else begin
            if (scan_en == 0) begin
                if (load_en == 1) begin
                    data_out <= data_in;
                    reg_out <= data_in;
                end else begin
                    data_out <= reg_out;
                end
            end else begin
                scan_out <= data_out[7];
                data_out <= {data_out[6:0], scan_in};
            end
        end
    end

endmodule
functional details 
[stdout]
ERROR: asynchronous reset did not clear the scan register.
TEST_FAILED
/workspace/banchmarks/pashencev/05_dft_testability/task_50/tb.v:159: $finish called at 126000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR: asynchronous reset did not clear the scan register.",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_8 run_20260425_215014_451219_c08f66 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR: asynchronous reset did not clear the scan register.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\codegemma-7b\rag_on\benchmarks\ilyasov\tasks\ilyasov__05_dft_testability__task_50\samples\run_20260425_215014_451219_c08f66__sample_8
generated.v preview 
module scan_reg8(
    input clk, rst_n, scan_en, scan_in, load_en,
    input [7:0] data_in,
    output reg [7:0] data_out,
    output reg scan_out
);

    reg [7:0] reg_out;

    always @(posedge clk) begin
        if (rst_n == 0) begin
            data_out <= 0;
            scan_out <= 0;
            reg_out <= 0;
        end else begin
            if (scan_en == 0) begin
                if (load_en == 1) begin
                    data_out <= data_in;
                    reg_out <= data_in;
                end else begin
                    data_out <= reg_out;
                end
            end else begin
                scan_out <= data_out[7];
                data_out <= {data_out[6:0], scan_in};
            end
        end
    end

endmodule
functional details 
[stdout]
ERROR: asynchronous reset did not clear the scan register.
TEST_FAILED
/workspace/banchmarks/pashencev/05_dft_testability/task_50/tb.v:159: $finish called at 126000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR: asynchronous reset did not clear the scan register.",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_9 run_20260425_215014_451219_c08f66 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR: asynchronous reset did not clear the scan register.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\codegemma-7b\rag_on\benchmarks\ilyasov\tasks\ilyasov__05_dft_testability__task_50\samples\run_20260425_215014_451219_c08f66__sample_9
generated.v preview 
module scan_reg8(
    input clk, rst_n, scan_en, scan_in, load_en,
    input [7:0] data_in,
    output reg [7:0] data_out,
    output reg scan_out
);

    reg [7:0] reg_out;

    always @(posedge clk) begin
        if (rst_n == 0) begin
            data_out <= 0;
            scan_out <= 0;
            reg_out <= 0;
        end else begin
            if (scan_en == 0) begin
                if (load_en == 1) begin
                    data_out <= data_in;
                    reg_out <= data_in;
                end else begin
                    data_out <= reg_out;
                end
            end else begin
                scan_out <= data_out[7];
                data_out <= {data_out[6:0], scan_in};
            end
        end
    end

endmodule
functional details 
[stdout]
ERROR: asynchronous reset did not clear the scan register.
TEST_FAILED
/workspace/banchmarks/pashencev/05_dft_testability/task_50/tb.v:159: $finish called at 126000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR: asynchronous reset did not clear the scan register.",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_10 run_20260425_215014_451219_c08f66 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR: asynchronous reset did not clear the scan register.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\codegemma-7b\rag_on\benchmarks\ilyasov\tasks\ilyasov__05_dft_testability__task_50\samples\run_20260425_215014_451219_c08f66__sample_10
generated.v preview 
module scan_reg8(
    input clk, rst_n, scan_en, scan_in, load_en,
    input [7:0] data_in,
    output reg [7:0] data_out,
    output reg scan_out
);

    reg [7:0] reg_out;

    always @(posedge clk) begin
        if (rst_n == 0) begin
            data_out <= 0;
            scan_out <= 0;
            reg_out <= 0;
        end else begin
            if (scan_en == 0) begin
                if (load_en == 1) begin
                    data_out <= data_in;
                    reg_out <= data_in;
                end else begin
                    data_out <= reg_out;
                end
            end else begin
                scan_out <= data_out[7];
                data_out <= {data_out[6:0], scan_in};
            end
        end
    end

endmodule
functional details 
[stdout]
ERROR: asynchronous reset did not clear the scan register.
TEST_FAILED
/workspace/banchmarks/pashencev/05_dft_testability/task_50/tb.v:159: $finish called at 126000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR: asynchronous reset did not clear the scan register.",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}