Назад к моделям Назад к профилю модели

codegemma:7b | RAG on

13_rtllm_memory / task_02 | LIFObuffer

benchmarkrtllm
task_idrtllm/13_rtllm_memory/task_02
samples_total10
final_success_samples0
final_success_rate_samples0.0%
functional_pass_rate_samples0.0%
synth_pass_rate_samples0.0%
source_runsrun_20260425_215014_451219_c08f66

Что показывает эта страница

Здесь перечислены все реальные попытки этой модели на одной задаче. По каждой попытке можно увидеть, до какой стадии она дошла, где именно сломалась и какое сообщение об ошибке вернулось из syntax, functional или synthesis.

Samples

sample run extract_ok syntax_ok functional_ok openlane_ok final_success failure_stage failure_reason details
sample_1 run_20260425_215014_451219_c08f66 ok ok failed skipped failed functional /workspace/banchmarks/rtllm/13_rtllm_memory/task_02/tb.v:18: error: port ``Clk'' is not a port of uut.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\codegemma-7b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_memory__task_02\samples\run_20260425_215014_451219_c08f66__sample_1
generated.v preview 
module LIFObuffer(
    input clk, Rst, EN, RW,
    input [3:0] dataIn,
    output reg EMPTY, FULL,
    output reg [3:0] dataOut
);

    reg [3:0] stack_mem [0:3];
    reg [3:0] SP;

    always @(posedge clk) begin
        if (Rst) begin
            SP <= 4'b1000;
            EMPTY <= 1'b1;
            FULL <= 1'b0;
            for (int i = 0; i < 4; i++) begin
                stack_mem[i] <= 4'b0;
            end
        end else begin
            if (EN) begin
                if (RW == 0) begin // Write operation
                    if (!FULL) begin
                        stack_mem[SP] <= dataIn;
                        SP <= SP - 1'b1;
                        FULL <= SP == 0;
                        EMPTY <= 1'b0;
                    end
                end else begin // Read operation
                    if (!EMPTY) begin
                        dataOut <= stack_mem[SP];
                        stack_mem[SP] <= 4'b0;
                        SP <= SP + 1'b1;
...
functional details 
[stderr]
/workspace/banchmarks/rtllm/13_rtllm_memory/task_02/tb.v:18: error: port ``Clk'' is not a port of uut.
1 error(s) during elaboration.
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/workspace/banchmarks/rtllm/13_rtllm_memory/task_02/tb.v:18: error: port ``Clk'' is not a port of uut.\n1 error(s) during elaboration.\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_2 run_20260425_215014_451219_c08f66 ok failed failed skipped failed syntax /data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_2/generated.v:14: error: EMPTY Unable to assign to unresolved wires.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\codegemma-7b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_memory__task_02\samples\run_20260425_215014_451219_c08f66__sample_2
generated.v preview 
module LIFObuffer(
    input clk, rst, EN, RW,
    input [3:0] dataIn,
    output reg EMPTY, FULL,
    output reg [3:0] dataOut
);

    reg [3:0] stack_mem[0:3];
    reg SP, i;

    always @(posedge clk) begin
        if (rst) begin
            SP <= 4;
            EMPTY <= 1'b1;
            FULL <= 1'b0;
            for (i = 0; i < 4; i = i + 1) begin
                stack_mem[i] <= 4'b0;
            end
        end else begin
            if (EN) begin
                if (RW) begin
                    if (SP > 0) begin
                        dataOut <= stack_mem[SP - 1];
                        stack_mem[SP - 1] <= 4'b0;
                        SP <= SP - 1;
                        EMPTY <= 1'b0;
                        FULL <= 1'b0;
                    end else begin
                        FULL <= 1'b1;
                    end
                end else begin
                    if (SP < 4) begin
...
syntax details 
[stderr]
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_2/generated.v:14: error: EMPTY Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_2/generated.v:15: error: FULL Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_2/generated.v:26: error: EMPTY Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_2/generated.v:27: error: FULL Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_2/generated.v:29: error: FULL Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_2/generated.v:35: error: EMPTY Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_2/generated.v:36: error: FULL Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_2/generated.v:38: error: EMPTY Unable to assign to unresolved wires.
8 error(s) during elaboration.
functional details 
[stderr]
/workspace/banchmarks/rtllm/13_rtllm_memory/task_02/tb.v:18: error: port ``Rst'' is not a port of uut.
/workspace/banchmarks/rtllm/13_rtllm_memory/task_02/tb.v:18: error: port ``Clk'' is not a port of uut.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_2/functional/generated.v:14: error: EMPTY Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_2/functional/generated.v:15: error: FULL Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_2/functional/generated.v:26: error: EMPTY Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_2/functional/generated.v:27: error: FULL Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_2/functional/generated.v:29: error: FULL Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_2/functional/generated.v:35: error: EMPTY Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_2/functional/generated.v:36: error: FULL Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_2/functional/generated.v:38: error: EMPTY Unable to assign to unresolved wires.
10 error(s) during elaboration.
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "syntax",
    "code": "syntax.iverilog_failed",
    "message": "/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_2/generated.v:14: error: EMPTY Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_2/generated.v:15: error: FULL Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_2/generated.v:26: error: EMPTY Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_2/generated.v:27: error: FULL Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_2/generated.v:29: error: FULL Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_2/generated.v:35: error: EMPTY Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_2/generated.v:36: error: FULL Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_2/generated.v:38: error: EMPTY Unable to assign to unresolved wires.\n8 error(s) during elaboration.\n",
    "retryable": false,
    "details": {}
  },
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/workspace/banchmarks/rtllm/13_rtllm_memory/task_02/tb.v:18: error: port ``Rst'' is not a port of uut.\n/workspace/banchmarks/rtllm/13_rtllm_memory/task_02/tb.v:18: error: port ``Clk'' is not a port of uut.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_2/functional/generated.v:14: error: EMPTY Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_2/functional/generated.v:15: error: FULL Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_2/functional/generated.v:26: error: EMPTY Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_2/functional/generated.v:27: error: FULL Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_2/functional/generated.v:29: error: FULL Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_2/functional/generated.v:35: error: EMPTY Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_2/functional/generated.v:36: error: FULL Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_2/functional/generated.v:38: error: EMPTY Unable to assign to unresolved wires.\n10 error(s) during elaboration.\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": false,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_3 run_20260425_215014_451219_c08f66 ok failed failed skipped failed syntax /data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_3/generated.v:14: error: EMPTY Unable to assign to unresolved wires.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\codegemma-7b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_memory__task_02\samples\run_20260425_215014_451219_c08f66__sample_3
generated.v preview 
module LIFObuffer(
    input clk, rst, EN, RW,
    input [3:0] dataIn,
    output reg EMPTY, FULL,
    output reg [3:0] dataOut
);

    reg [3:0] stack_mem [0:3];
    reg [3:0] SP;

    always @(posedge clk) begin
        if (rst) begin
            SP <= 4'b1000;
            EMPTY <= 1'b1;
            FULL <= 1'b0;
            for (int i = 0; i < 4; i++) begin
                stack_mem[i] <= 4'b0;
            end
        end else begin
            if (EN) begin
                if (RW) begin // Read operation
                    if (SP < 4'b1000) begin
                        dataOut <= stack_mem[SP];
                        stack_mem[SP] <= 4'b0;
                        SP <= SP + 1'b1;
                        EMPTY <= 1'b0;
                    end else begin
                        FULL <= 1'b1;
                    end
                end else begin // Write operation
                    if (SP > 4'b0000) begin
                        SP <= SP - 1'b1;
...
syntax details 
[stderr]
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_3/generated.v:14: error: EMPTY Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_3/generated.v:15: error: FULL Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_3/generated.v:26: error: EMPTY Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_3/generated.v:28: error: FULL Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_3/generated.v:34: error: EMPTY Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_3/generated.v:36: error: FULL Unable to assign to unresolved wires.
6 error(s) during elaboration.
functional details 
[stderr]
/workspace/banchmarks/rtllm/13_rtllm_memory/task_02/tb.v:18: error: port ``Rst'' is not a port of uut.
/workspace/banchmarks/rtllm/13_rtllm_memory/task_02/tb.v:18: error: port ``Clk'' is not a port of uut.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_3/functional/generated.v:14: error: EMPTY Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_3/functional/generated.v:15: error: FULL Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_3/functional/generated.v:26: error: EMPTY Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_3/functional/generated.v:28: error: FULL Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_3/functional/generated.v:34: error: EMPTY Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_3/functional/generated.v:36: error: FULL Unable to assign to unresolved wires.
8 error(s) during elaboration.
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "syntax",
    "code": "syntax.iverilog_failed",
    "message": "/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_3/generated.v:14: error: EMPTY Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_3/generated.v:15: error: FULL Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_3/generated.v:26: error: EMPTY Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_3/generated.v:28: error: FULL Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_3/generated.v:34: error: EMPTY Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_3/generated.v:36: error: FULL Unable to assign to unresolved wires.\n6 error(s) during elaboration.\n",
    "retryable": false,
    "details": {}
  },
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/workspace/banchmarks/rtllm/13_rtllm_memory/task_02/tb.v:18: error: port ``Rst'' is not a port of uut.\n/workspace/banchmarks/rtllm/13_rtllm_memory/task_02/tb.v:18: error: port ``Clk'' is not a port of uut.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_3/functional/generated.v:14: error: EMPTY Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_3/functional/generated.v:15: error: FULL Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_3/functional/generated.v:26: error: EMPTY Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_3/functional/generated.v:28: error: FULL Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_3/functional/generated.v:34: error: EMPTY Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_3/functional/generated.v:36: error: FULL Unable to assign to unresolved wires.\n8 error(s) during elaboration.\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": false,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_4 run_20260425_215014_451219_c08f66 ok failed failed skipped failed syntax /data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_4/generated.v:14: error: EMPTY Unable to assign to unresolved wires.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\codegemma-7b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_memory__task_02\samples\run_20260425_215014_451219_c08f66__sample_4
generated.v preview 
module LIFObuffer(
    input clk, rst, EN, RW,
    input [3:0] dataIn,
    output reg EMPTY, FULL,
    output reg [3:0] dataOut
);

    reg [3:0] stack_mem [0:3];
    reg [3:0] SP;

    always @(posedge clk) begin
        if (rst) begin
            SP <= 4'b1000;
            EMPTY <= 1'b1;
            FULL <= 1'b0;
            for (int i = 0; i < 4; i++) begin
                stack_mem[i] <= 4'b0;
            end
        end else begin
            if (EN) begin
                if (RW) begin // Read operation
                    if (SP < 4'b1000) begin
                        dataOut <= stack_mem[SP];
                        stack_mem[SP] <= 4'b0;
                        SP <= SP + 1'b1;
                        EMPTY <= 1'b0;
                    end else begin
                        FULL <= 1'b1;
                    end
                end else begin // Write operation
                    if (SP > 4'b0000) begin
                        SP <= SP - 1'b1;
...
syntax details 
[stderr]
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_4/generated.v:14: error: EMPTY Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_4/generated.v:15: error: FULL Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_4/generated.v:26: error: EMPTY Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_4/generated.v:28: error: FULL Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_4/generated.v:34: error: EMPTY Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_4/generated.v:36: error: FULL Unable to assign to unresolved wires.
6 error(s) during elaboration.
functional details 
[stderr]
/workspace/banchmarks/rtllm/13_rtllm_memory/task_02/tb.v:18: error: port ``Rst'' is not a port of uut.
/workspace/banchmarks/rtllm/13_rtllm_memory/task_02/tb.v:18: error: port ``Clk'' is not a port of uut.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_4/functional/generated.v:14: error: EMPTY Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_4/functional/generated.v:15: error: FULL Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_4/functional/generated.v:26: error: EMPTY Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_4/functional/generated.v:28: error: FULL Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_4/functional/generated.v:34: error: EMPTY Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_4/functional/generated.v:36: error: FULL Unable to assign to unresolved wires.
8 error(s) during elaboration.
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "syntax",
    "code": "syntax.iverilog_failed",
    "message": "/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_4/generated.v:14: error: EMPTY Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_4/generated.v:15: error: FULL Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_4/generated.v:26: error: EMPTY Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_4/generated.v:28: error: FULL Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_4/generated.v:34: error: EMPTY Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_4/generated.v:36: error: FULL Unable to assign to unresolved wires.\n6 error(s) during elaboration.\n",
    "retryable": false,
    "details": {}
  },
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/workspace/banchmarks/rtllm/13_rtllm_memory/task_02/tb.v:18: error: port ``Rst'' is not a port of uut.\n/workspace/banchmarks/rtllm/13_rtllm_memory/task_02/tb.v:18: error: port ``Clk'' is not a port of uut.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_4/functional/generated.v:14: error: EMPTY Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_4/functional/generated.v:15: error: FULL Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_4/functional/generated.v:26: error: EMPTY Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_4/functional/generated.v:28: error: FULL Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_4/functional/generated.v:34: error: EMPTY Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_4/functional/generated.v:36: error: FULL Unable to assign to unresolved wires.\n8 error(s) during elaboration.\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": false,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_5 run_20260425_215014_451219_c08f66 ok failed failed skipped failed syntax /data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_5/generated.v:14: error: EMPTY Unable to assign to unresolved wires.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\codegemma-7b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_memory__task_02\samples\run_20260425_215014_451219_c08f66__sample_5
generated.v preview 
module LIFObuffer(
    input clk, rst, EN, RW,
    input [3:0] dataIn,
    output reg EMPTY, FULL,
    output reg [3:0] dataOut
);

    reg [3:0] stack_mem [0:3];
    reg [3:0] SP;

    always @(posedge clk) begin
        if (rst) begin
            SP <= 4'b1000;
            EMPTY <= 1'b1;
            FULL <= 1'b0;
            for (int i = 0; i < 4; i++) begin
                stack_mem[i] <= 4'b0;
            end
        end else begin
            if (EN) begin
                if (RW) begin // Read operation
                    if (SP < 4'b1000) begin
                        dataOut <= stack_mem[SP];
                        stack_mem[SP] <= 4'b0;
                        SP <= SP + 1'b1;
                        EMPTY <= 1'b0;
                    end else begin
                        FULL <= 1'b1;
                    end
                end else begin // Write operation
                    if (SP > 4'b0000) begin
                        stack_mem[SP] <= dataIn;
...
syntax details 
[stderr]
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_5/generated.v:14: error: EMPTY Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_5/generated.v:15: error: FULL Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_5/generated.v:26: error: EMPTY Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_5/generated.v:28: error: FULL Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_5/generated.v:34: error: FULL Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_5/generated.v:36: error: EMPTY Unable to assign to unresolved wires.
6 error(s) during elaboration.
functional details 
[stderr]
/workspace/banchmarks/rtllm/13_rtllm_memory/task_02/tb.v:18: error: port ``Rst'' is not a port of uut.
/workspace/banchmarks/rtllm/13_rtllm_memory/task_02/tb.v:18: error: port ``Clk'' is not a port of uut.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_5/functional/generated.v:14: error: EMPTY Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_5/functional/generated.v:15: error: FULL Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_5/functional/generated.v:26: error: EMPTY Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_5/functional/generated.v:28: error: FULL Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_5/functional/generated.v:34: error: FULL Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_5/functional/generated.v:36: error: EMPTY Unable to assign to unresolved wires.
8 error(s) during elaboration.
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "syntax",
    "code": "syntax.iverilog_failed",
    "message": "/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_5/generated.v:14: error: EMPTY Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_5/generated.v:15: error: FULL Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_5/generated.v:26: error: EMPTY Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_5/generated.v:28: error: FULL Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_5/generated.v:34: error: FULL Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_5/generated.v:36: error: EMPTY Unable to assign to unresolved wires.\n6 error(s) during elaboration.\n",
    "retryable": false,
    "details": {}
  },
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/workspace/banchmarks/rtllm/13_rtllm_memory/task_02/tb.v:18: error: port ``Rst'' is not a port of uut.\n/workspace/banchmarks/rtllm/13_rtllm_memory/task_02/tb.v:18: error: port ``Clk'' is not a port of uut.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_5/functional/generated.v:14: error: EMPTY Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_5/functional/generated.v:15: error: FULL Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_5/functional/generated.v:26: error: EMPTY Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_5/functional/generated.v:28: error: FULL Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_5/functional/generated.v:34: error: FULL Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_5/functional/generated.v:36: error: EMPTY Unable to assign to unresolved wires.\n8 error(s) during elaboration.\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": false,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_6 run_20260425_215014_451219_c08f66 ok failed failed skipped failed syntax /data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_6/generated.v:25: error: FULL Unable to assign to unresolved wires.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\codegemma-7b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_memory__task_02\samples\run_20260425_215014_451219_c08f66__sample_6
generated.v preview 
module LIFObuffer(
    input clk, rst, EN, RW,
    input [3:0] dataIn,
    output reg EMPTY, FULL,
    output reg [3:0] dataOut
);

    reg [3:0] stack_mem [0:3];
    reg SP, i;

    always @(posedge clk) begin
        if (rst) begin
            SP <= 4'b1000;
            for (i = 0; i < 4; i = i + 1) begin
                stack_mem[i] <= 4'b0000;
            end
        end else begin
            if (EN) begin
                if (RW) begin
                    if (!FULL) begin
                        dataOut <= stack_mem[SP - 1];
                        stack_mem[SP - 1] <= 0;
                        SP <= SP + 1;
                    end else begin
                        FULL <= 1'b1;
                    end
                end else begin
                    if (!FULL) begin
                        stack_mem[SP - 1] <= dataIn;
                        SP <= SP - 1;
                    end else begin
                        FULL <= 1'b1;
...
syntax details 
[stderr]
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_6/generated.v:25: error: FULL Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_6/generated.v:32: error: FULL Unable to assign to unresolved wires.
2 error(s) during elaboration.
functional details 
[stderr]
/workspace/banchmarks/rtllm/13_rtllm_memory/task_02/tb.v:18: error: port ``Rst'' is not a port of uut.
/workspace/banchmarks/rtllm/13_rtllm_memory/task_02/tb.v:18: error: port ``Clk'' is not a port of uut.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_6/functional/generated.v:25: error: FULL Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_6/functional/generated.v:32: error: FULL Unable to assign to unresolved wires.
4 error(s) during elaboration.
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "syntax",
    "code": "syntax.iverilog_failed",
    "message": "/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_6/generated.v:25: error: FULL Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_6/generated.v:32: error: FULL Unable to assign to unresolved wires.\n2 error(s) during elaboration.\n",
    "retryable": false,
    "details": {}
  },
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/workspace/banchmarks/rtllm/13_rtllm_memory/task_02/tb.v:18: error: port ``Rst'' is not a port of uut.\n/workspace/banchmarks/rtllm/13_rtllm_memory/task_02/tb.v:18: error: port ``Clk'' is not a port of uut.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_6/functional/generated.v:25: error: FULL Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_6/functional/generated.v:32: error: FULL Unable to assign to unresolved wires.\n4 error(s) during elaboration.\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": false,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_7 run_20260425_215014_451219_c08f66 ok failed failed skipped failed syntax /data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_7/generated.v:14: error: EMPTY Unable to assign to unresolved wires.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\codegemma-7b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_memory__task_02\samples\run_20260425_215014_451219_c08f66__sample_7
generated.v preview 
module LIFObuffer(
    input clk, rst, EN, RW,
    input [3:0] dataIn,
    output reg EMPTY, FULL,
    output reg [3:0] dataOut
);

    reg [3:0] stack_mem [0:3];
    reg [3:0] SP;

    always @(posedge clk) begin
        if (rst) begin
            SP <= 4'b1000;
            EMPTY <= 1'b1;
            FULL <= 1'b0;
            for (int i = 0; i < 4; i++) begin
                stack_mem[i] <= 4'b0;
            end
        end else begin
            if (EN) begin
                if (RW) begin
                    if (SP > 0) begin
                        dataOut <= stack_mem[SP - 1];
                        stack_mem[SP - 1] <= 4'b0;
                        SP <= SP - 1;
                        EMPTY <= 1'b0;
                    end else begin
                        FULL <= 1'b1;
                    end
                end else begin
                    if (SP < 4) begin
                        stack_mem[SP] <= dataIn;
...
syntax details 
[stderr]
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_7/generated.v:14: error: EMPTY Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_7/generated.v:15: error: FULL Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_7/generated.v:26: error: EMPTY Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_7/generated.v:28: error: FULL Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_7/generated.v:34: error: FULL Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_7/generated.v:36: error: EMPTY Unable to assign to unresolved wires.
6 error(s) during elaboration.
functional details 
[stderr]
/workspace/banchmarks/rtllm/13_rtllm_memory/task_02/tb.v:18: error: port ``Rst'' is not a port of uut.
/workspace/banchmarks/rtllm/13_rtllm_memory/task_02/tb.v:18: error: port ``Clk'' is not a port of uut.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_7/functional/generated.v:14: error: EMPTY Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_7/functional/generated.v:15: error: FULL Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_7/functional/generated.v:26: error: EMPTY Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_7/functional/generated.v:28: error: FULL Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_7/functional/generated.v:34: error: FULL Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_7/functional/generated.v:36: error: EMPTY Unable to assign to unresolved wires.
8 error(s) during elaboration.
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "syntax",
    "code": "syntax.iverilog_failed",
    "message": "/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_7/generated.v:14: error: EMPTY Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_7/generated.v:15: error: FULL Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_7/generated.v:26: error: EMPTY Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_7/generated.v:28: error: FULL Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_7/generated.v:34: error: FULL Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_7/generated.v:36: error: EMPTY Unable to assign to unresolved wires.\n6 error(s) during elaboration.\n",
    "retryable": false,
    "details": {}
  },
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/workspace/banchmarks/rtllm/13_rtllm_memory/task_02/tb.v:18: error: port ``Rst'' is not a port of uut.\n/workspace/banchmarks/rtllm/13_rtllm_memory/task_02/tb.v:18: error: port ``Clk'' is not a port of uut.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_7/functional/generated.v:14: error: EMPTY Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_7/functional/generated.v:15: error: FULL Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_7/functional/generated.v:26: error: EMPTY Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_7/functional/generated.v:28: error: FULL Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_7/functional/generated.v:34: error: FULL Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_7/functional/generated.v:36: error: EMPTY Unable to assign to unresolved wires.\n8 error(s) during elaboration.\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": false,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_8 run_20260425_215014_451219_c08f66 ok failed failed skipped failed syntax /data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_8/generated.v:14: error: EMPTY Unable to assign to unresolved wires.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\codegemma-7b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_memory__task_02\samples\run_20260425_215014_451219_c08f66__sample_8
generated.v preview 
module LIFObuffer(
    input clk, rst, EN, RW,
    input [3:0] dataIn,
    output reg EMPTY, FULL,
    output reg [3:0] dataOut
);

    reg [3:0] stack_mem [0:3];
    reg [3:0] SP;

    always @(posedge clk) begin
        if (rst) begin
            SP <= 4'b1000;
            EMPTY <= 1'b1;
            FULL <= 1'b0;
            for (int i = 0; i < 4; i++) begin
                stack_mem[i] <= 4'b0;
            end
        end else begin
            if (EN) begin
                if (RW) begin // Read operation
                    if (SP < 4'b1000) begin
                        dataOut <= stack_mem[SP];
                        stack_mem[SP] <= 4'b0;
                        SP <= SP + 1'b1;
                        EMPTY <= 1'b0;
                    end else begin
                        FULL <= 1'b1;
                    end
                end else begin // Write operation
                    if (SP > 4'b0000) begin
                        SP <= SP - 1'b1;
...
syntax details 
[stderr]
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_8/generated.v:14: error: EMPTY Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_8/generated.v:15: error: FULL Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_8/generated.v:26: error: EMPTY Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_8/generated.v:28: error: FULL Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_8/generated.v:34: error: EMPTY Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_8/generated.v:36: error: FULL Unable to assign to unresolved wires.
6 error(s) during elaboration.
functional details 
[stderr]
/workspace/banchmarks/rtllm/13_rtllm_memory/task_02/tb.v:18: error: port ``Rst'' is not a port of uut.
/workspace/banchmarks/rtllm/13_rtllm_memory/task_02/tb.v:18: error: port ``Clk'' is not a port of uut.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_8/functional/generated.v:14: error: EMPTY Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_8/functional/generated.v:15: error: FULL Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_8/functional/generated.v:26: error: EMPTY Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_8/functional/generated.v:28: error: FULL Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_8/functional/generated.v:34: error: EMPTY Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_8/functional/generated.v:36: error: FULL Unable to assign to unresolved wires.
8 error(s) during elaboration.
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "syntax",
    "code": "syntax.iverilog_failed",
    "message": "/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_8/generated.v:14: error: EMPTY Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_8/generated.v:15: error: FULL Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_8/generated.v:26: error: EMPTY Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_8/generated.v:28: error: FULL Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_8/generated.v:34: error: EMPTY Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_8/generated.v:36: error: FULL Unable to assign to unresolved wires.\n6 error(s) during elaboration.\n",
    "retryable": false,
    "details": {}
  },
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/workspace/banchmarks/rtllm/13_rtllm_memory/task_02/tb.v:18: error: port ``Rst'' is not a port of uut.\n/workspace/banchmarks/rtllm/13_rtllm_memory/task_02/tb.v:18: error: port ``Clk'' is not a port of uut.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_8/functional/generated.v:14: error: EMPTY Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_8/functional/generated.v:15: error: FULL Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_8/functional/generated.v:26: error: EMPTY Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_8/functional/generated.v:28: error: FULL Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_8/functional/generated.v:34: error: EMPTY Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_8/functional/generated.v:36: error: FULL Unable to assign to unresolved wires.\n8 error(s) during elaboration.\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": false,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_9 run_20260425_215014_451219_c08f66 ok ok failed skipped failed functional /workspace/banchmarks/rtllm/13_rtllm_memory/task_02/tb.v:18: error: port ``Clk'' is not a port of uut.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\codegemma-7b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_memory__task_02\samples\run_20260425_215014_451219_c08f66__sample_9
generated.v preview 
module LIFObuffer(
    input clk, Rst, EN, RW,
    input [3:0] dataIn,
    output reg EMPTY, FULL,
    output reg [3:0] dataOut
);

    reg [3:0] stack_mem [0:3];
    reg [3:0] SP;

    always @(posedge clk) begin
        if (Rst) begin
            SP <= 4'b1000;
            EMPTY <= 1'b1;
            FULL <= 1'b0;
            for (int i = 0; i < 4; i++) begin
                stack_mem[i] <= 4'b0;
            end
        end else begin
            if (EN) begin
                if (RW == 0) begin // Write operation
                    if (!FULL) begin
                        stack_mem[SP] <= dataIn;
                        SP <= SP - 1;
                        FULL <= SP == 0;
                        EMPTY <= 0;
                    end
                end else begin // Read operation
                    if (!EMPTY) begin
                        dataOut <= stack_mem[SP];
                        stack_mem[SP] <= 4'b0;
                        SP <= SP + 1;
...
functional details 
[stderr]
/workspace/banchmarks/rtllm/13_rtllm_memory/task_02/tb.v:18: error: port ``Clk'' is not a port of uut.
1 error(s) during elaboration.
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/workspace/banchmarks/rtllm/13_rtllm_memory/task_02/tb.v:18: error: port ``Clk'' is not a port of uut.\n1 error(s) during elaboration.\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_10 run_20260425_215014_451219_c08f66 ok failed failed skipped failed syntax /data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_10/generated.v:14: error: EMPTY Unable to assign to unresolved wires.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\codegemma-7b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_memory__task_02\samples\run_20260425_215014_451219_c08f66__sample_10
generated.v preview 
module LIFObuffer(
    input clk, rst, EN, RW,
    input [3:0] dataIn,
    output reg EMPTY, FULL,
    output reg [3:0] dataOut
);

    reg [3:0] stack_mem [0:3];
    reg [3:0] SP;

    always @(posedge clk) begin
        if (rst) begin
            SP <= 4'b1000;
            EMPTY <= 1'b1;
            FULL <= 1'b0;
            for (int i = 0; i < 4; i++) begin
                stack_mem[i] <= 4'b0;
            end
        end else begin
            if (EN) begin
                if (RW) begin // Read operation
                    if (SP < 4'b1000) begin
                        dataOut <= stack_mem[SP];
                        stack_mem[SP] <= 4'b0;
                        SP <= SP + 1'b1;
                        FULL <= 1'b0;
                    end else begin
                        FULL <= 1'b1;
                    end
                end else begin // Write operation
                    if (SP > 4'b0000) begin
                        SP <= SP - 1'b1;
...
syntax details 
[stderr]
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_10/generated.v:14: error: EMPTY Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_10/generated.v:15: error: FULL Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_10/generated.v:26: error: FULL Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_10/generated.v:28: error: FULL Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_10/generated.v:34: error: EMPTY Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_10/generated.v:36: error: EMPTY Unable to assign to unresolved wires.
6 error(s) during elaboration.
functional details 
[stderr]
/workspace/banchmarks/rtllm/13_rtllm_memory/task_02/tb.v:18: error: port ``Rst'' is not a port of uut.
/workspace/banchmarks/rtllm/13_rtllm_memory/task_02/tb.v:18: error: port ``Clk'' is not a port of uut.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_10/functional/generated.v:14: error: EMPTY Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_10/functional/generated.v:15: error: FULL Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_10/functional/generated.v:26: error: FULL Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_10/functional/generated.v:28: error: FULL Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_10/functional/generated.v:34: error: EMPTY Unable to assign to unresolved wires.
/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_10/functional/generated.v:36: error: EMPTY Unable to assign to unresolved wires.
8 error(s) during elaboration.
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "syntax",
    "code": "syntax.iverilog_failed",
    "message": "/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_10/generated.v:14: error: EMPTY Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_10/generated.v:15: error: FULL Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_10/generated.v:26: error: FULL Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_10/generated.v:28: error: FULL Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_10/generated.v:34: error: EMPTY Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_10/generated.v:36: error: EMPTY Unable to assign to unresolved wires.\n6 error(s) during elaboration.\n",
    "retryable": false,
    "details": {}
  },
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/workspace/banchmarks/rtllm/13_rtllm_memory/task_02/tb.v:18: error: port ``Rst'' is not a port of uut.\n/workspace/banchmarks/rtllm/13_rtllm_memory/task_02/tb.v:18: error: port ``Clk'' is not a port of uut.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_10/functional/generated.v:14: error: EMPTY Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_10/functional/generated.v:15: error: FULL Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_10/functional/generated.v:26: error: FULL Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_10/functional/generated.v:28: error: FULL Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_10/functional/generated.v:34: error: EMPTY Unable to assign to unresolved wires.\n/data/eval/out/run_20260425_215014_451219_c08f66/tmp/codegemma/rtllm__13_rtllm_memory__task_02/sample_10/functional/generated.v:36: error: EMPTY Unable to assign to unresolved wires.\n8 error(s) during elaboration.\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": false,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}