Назад к моделям Назад к профилю модели

codegemma:7b | RAG on

13_rtllm_miscellaneous / task_19 | verified_signal_generator

benchmarkrtllm
task_idrtllm/13_rtllm_miscellaneous/task_19
samples_total10
final_success_samples0
final_success_rate_samples0.0%
functional_pass_rate_samples100.0%
synth_pass_rate_samples0.0%
source_runsrun_20260425_215014_451219_c08f66

Что показывает эта страница

Здесь перечислены все реальные попытки этой модели на одной задаче. По каждой попытке можно увидеть, до какой стадии она дошла, где именно сломалась и какое сообщение об ошибке вернулось из syntax, functional или synthesis.

Samples

sample run extract_ok syntax_ok functional_ok openlane_ok final_success failure_stage failure_reason details
sample_1 run_20260425_215014_451219_c08f66 ok ok ok failed failed synthesis OpenLane failed: 2
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\codegemma-7b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_19\samples\run_20260425_215014_451219_c08f66__sample_1
generated.v preview 
module signal_generator(
    input clk,
    input rst_n,
    output reg [4:0] wave
);

    reg state;

    always @(posedge clk or negedge rst_n) begin
        if (~rst_n) begin
            state <= 0;
            wave <= 0;
        end else begin
            case (state)
                0: wave <= wave + 1;
                31: state <= 1;
                1: wave <= wave - 1;
                0: state <= 0;
            endcase
        end
    end

endmodule
functional details 
[stdout]
ERROR: /workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_19/tb.v:17: $readmemh: Unable to open tri_gen.txt for reading.
===========Error===========
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_19/tb.v:39: $finish called at 1010 (1s)
synthesis details 
[error]
OpenLane failed: 2
errors[] 
[
  {
    "stage": "openlane",
    "code": "openlane.failed",
    "message": "OpenLane failed: 2",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": true,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_2 run_20260425_215014_451219_c08f66 ok ok ok failed failed synthesis OpenLane failed: 2
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\codegemma-7b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_19\samples\run_20260425_215014_451219_c08f66__sample_2
generated.v preview 
module signal_generator(
    input clk,
    input rst_n,
    output reg [4:0] wave
);

    reg state;

    always @(posedge clk or negedge rst_n) begin
        if (~rst_n) begin
            state <= 0;
            wave <= 0;
        end else begin
            case (state)
                0: wave <= wave + 1;
                31: state <= 1;
                1: wave <= wave - 1;
                0: state <= 0;
            endcase
        end
    end

endmodule
functional details 
[stdout]
ERROR: /workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_19/tb.v:17: $readmemh: Unable to open tri_gen.txt for reading.
===========Error===========
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_19/tb.v:39: $finish called at 1010 (1s)
synthesis details 
[error]
OpenLane failed: 2
errors[] 
[
  {
    "stage": "openlane",
    "code": "openlane.failed",
    "message": "OpenLane failed: 2",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": true,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_3 run_20260425_215014_451219_c08f66 ok ok ok failed failed synthesis OpenLane failed: 2
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\codegemma-7b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_19\samples\run_20260425_215014_451219_c08f66__sample_3
generated.v preview 
module signal_generator(
    input clk,
    input rst_n,
    output reg [4:0] wave
);

    reg state;

    always @(posedge clk or negedge rst_n) begin
        if (~rst_n) begin
            state <= 0;
            wave <= 0;
        end else begin
            case (state)
                0: wave <= wave + 1;
                31: state <= 1;
                1: wave <= wave - 1;
                0: state <= 0;
            endcase
        end
    end

endmodule
functional details 
[stdout]
ERROR: /workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_19/tb.v:17: $readmemh: Unable to open tri_gen.txt for reading.
===========Error===========
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_19/tb.v:39: $finish called at 1010 (1s)
synthesis details 
[error]
OpenLane failed: 2
errors[] 
[
  {
    "stage": "openlane",
    "code": "openlane.failed",
    "message": "OpenLane failed: 2",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": true,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_4 run_20260425_215014_451219_c08f66 ok ok ok failed failed synthesis OpenLane failed: 2
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\codegemma-7b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_19\samples\run_20260425_215014_451219_c08f66__sample_4
generated.v preview 
module signal_generator(
    input clk,
    input rst_n,
    output reg [4:0] wave
);

    reg state;

    always @(posedge clk or negedge rst_n) begin
        if (~rst_n) begin
            state <= 0;
            wave <= 0;
        end else begin
            case (state)
                0: wave <= wave + 1;
                31: state <= 1;
                1: wave <= wave - 1;
                0: state <= 0;
            endcase
        end
    end

endmodule
functional details 
[stdout]
ERROR: /workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_19/tb.v:17: $readmemh: Unable to open tri_gen.txt for reading.
===========Error===========
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_19/tb.v:39: $finish called at 1010 (1s)
synthesis details 
[error]
OpenLane failed: 2
errors[] 
[
  {
    "stage": "openlane",
    "code": "openlane.failed",
    "message": "OpenLane failed: 2",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": true,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_5 run_20260425_215014_451219_c08f66 ok ok ok failed failed synthesis OpenLane failed: 2
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\codegemma-7b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_19\samples\run_20260425_215014_451219_c08f66__sample_5
generated.v preview 
module signal_generator(
    input clk,
    input rst_n,
    output reg [4:0] wave
);

    reg state;

    always @(posedge clk or negedge rst_n) begin
        if (~rst_n) begin
            state <= 0;
            wave <= 0;
        end else begin
            case (state)
                0: wave <= wave + 1;
                31: state <= 1;
                1: wave <= wave - 1;
                0: state <= 0;
            endcase
        end
    end

endmodule
functional details 
[stdout]
ERROR: /workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_19/tb.v:17: $readmemh: Unable to open tri_gen.txt for reading.
===========Error===========
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_19/tb.v:39: $finish called at 1010 (1s)
synthesis details 
[error]
OpenLane failed: 2
errors[] 
[
  {
    "stage": "openlane",
    "code": "openlane.failed",
    "message": "OpenLane failed: 2",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": true,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_6 run_20260425_215014_451219_c08f66 ok ok ok failed failed synthesis OpenLane failed: 2
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\codegemma-7b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_19\samples\run_20260425_215014_451219_c08f66__sample_6
generated.v preview 
module signal_generator(
    input clk,
    input rst_n,
    output reg [4:0] wave
);

    reg state;

    always @(posedge clk or negedge rst_n) begin
        if (~rst_n) begin
            state <= 0;
            wave <= 0;
        end else begin
            case (state)
                0: begin
                    wave <= wave + 1;
                    if (wave == 31) begin
                        state <= 1;
                    end
                end
                1: begin
                    wave <= wave - 1;
                    if (wave == 0) begin
                        state <= 0;
                    end
                end
            endcase
        end
    end

endmodule
functional details 
[stdout]
ERROR: /workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_19/tb.v:17: $readmemh: Unable to open tri_gen.txt for reading.
===========Error===========
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_19/tb.v:39: $finish called at 1010 (1s)
synthesis details 
[error]
OpenLane failed: 2
errors[] 
[
  {
    "stage": "openlane",
    "code": "openlane.failed",
    "message": "OpenLane failed: 2",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": true,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_7 run_20260425_215014_451219_c08f66 ok ok ok failed failed synthesis OpenLane failed: 2
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\codegemma-7b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_19\samples\run_20260425_215014_451219_c08f66__sample_7
generated.v preview 
module signal_generator(
    input clk,
    input rst_n,
    output reg [4:0] wave
);

    reg state;

    always @(posedge clk or negedge rst_n) begin
        if (~rst_n) begin
            state <= 0;
            wave <= 0;
        end else begin
            case (state)
                0: wave <= wave + 1;
                31: state <= 1;
                1: wave <= wave - 1;
                0: state <= 0;
            endcase
        end
    end

endmodule
functional details 
[stdout]
ERROR: /workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_19/tb.v:17: $readmemh: Unable to open tri_gen.txt for reading.
===========Error===========
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_19/tb.v:39: $finish called at 1010 (1s)
synthesis details 
[error]
OpenLane failed: 2
errors[] 
[
  {
    "stage": "openlane",
    "code": "openlane.failed",
    "message": "OpenLane failed: 2",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": true,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_8 run_20260425_215014_451219_c08f66 ok ok ok failed failed synthesis OpenLane failed: 2
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\codegemma-7b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_19\samples\run_20260425_215014_451219_c08f66__sample_8
generated.v preview 
module signal_generator(
    input clk,
    input rst_n,
    output reg [4:0] wave
);

    reg state;

    always @(posedge clk or negedge rst_n) begin
        if (~rst_n) begin
            state <= 0;
            wave <= 0;
        end else begin
            case (state)
                0: wave <= wave + 1;
                31: state <= 1;
                1: wave <= wave - 1;
                0: state <= 0;
            endcase
        end
    end

endmodule
functional details 
[stdout]
ERROR: /workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_19/tb.v:17: $readmemh: Unable to open tri_gen.txt for reading.
===========Error===========
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_19/tb.v:39: $finish called at 1010 (1s)
synthesis details 
[error]
OpenLane failed: 2
errors[] 
[
  {
    "stage": "openlane",
    "code": "openlane.failed",
    "message": "OpenLane failed: 2",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": true,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_9 run_20260425_215014_451219_c08f66 ok ok ok failed failed synthesis OpenLane failed: 2
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\codegemma-7b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_19\samples\run_20260425_215014_451219_c08f66__sample_9
generated.v preview 
module signal_generator(
    input clk,
    input rst_n,
    output reg [4:0] wave
);

    reg state;

    always @(posedge clk or negedge rst_n) begin
        if (~rst_n) begin
            state <= 0;
            wave <= 0;
        end else begin
            case (state)
                0: wave <= wave + 1;
                31: state <= 1;
                1: wave <= wave - 1;
                0: state <= 0;
            endcase
        end
    end

endmodule
functional details 
[stdout]
ERROR: /workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_19/tb.v:17: $readmemh: Unable to open tri_gen.txt for reading.
===========Error===========
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_19/tb.v:39: $finish called at 1010 (1s)
synthesis details 
[error]
OpenLane failed: 2
errors[] 
[
  {
    "stage": "openlane",
    "code": "openlane.failed",
    "message": "OpenLane failed: 2",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": true,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_10 run_20260425_215014_451219_c08f66 ok ok ok failed failed synthesis OpenLane failed: 2
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\codegemma-7b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_19\samples\run_20260425_215014_451219_c08f66__sample_10
generated.v preview 
module signal_generator(
    input clk,
    input rst_n,
    output reg [4:0] wave
);

    reg state;

    always @(posedge clk or negedge rst_n) begin
        if (~rst_n) begin
            state <= 0;
            wave <= 0;
        end else begin
            case (state)
                0: wave <= wave + 1;
                31: state <= 1;
                1: wave <= wave - 1;
                0: state <= 0;
            endcase
        end
    end

endmodule
functional details 
[stdout]
ERROR: /workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_19/tb.v:17: $readmemh: Unable to open tri_gen.txt for reading.
===========Error===========
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_19/tb.v:39: $finish called at 1010 (1s)
synthesis details 
[error]
OpenLane failed: 2
errors[] 
[
  {
    "stage": "openlane",
    "code": "openlane.failed",
    "message": "OpenLane failed: 2",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": true,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}