Назад к моделям Назад к профилю модели

deepseek-coder-v2:16b | RAG off

10_fault_tolerant_safety / task_101 | lockstep_event_counter

benchmarkilyasov
task_idilyasov/10_fault_tolerant_safety/task_101
samples_total10
final_success_samples0
final_success_rate_samples0.0%
functional_pass_rate_samples0.0%
synth_pass_rate_samples0.0%
source_runsrun_20260427_102437_171676_163c0c

Что показывает эта страница

Здесь перечислены все реальные попытки этой модели на одной задаче. По каждой попытке можно увидеть, до какой стадии она дошла, где именно сломалась и какое сообщение об ошибке вернулось из syntax, functional или synthesis.

Samples

sample run extract_ok syntax_ok functional_ok openlane_ok final_success failure_stage failure_reason details
sample_1 run_20260427_102437_171676_163c0c ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (step 1): count=0 expected=1
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\deepseek-coder-v2-16b\rag_off\benchmarks\ilyasov\tasks\ilyasov__10_fault_tolerant_safety__task_101\samples\run_20260427_102437_171676_163c0c__sample_1
generated.v preview 
module lockstep_event_counter (
    input clk,
    input rst_n,
    input load,
    input step,
    input [3:0] load_value,
    input inject_shadow_fault,
    output reg [3:0] count,
    output reg count_valid,
    output reg fault_flag,
    output reg halted
);

reg [3:0] primary;
reg [3:0] shadow;
reg mismatch;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        primary <= 4'h0;
        shadow <= 4'h0;
        count <= 4'h0;
        count_valid <= 1'b0;
        fault_flag <= 1'b0;
        halted <= 1'b0;
    end else begin
        if (load) begin
            primary <= load_value;
            shadow <= load_value;
        end else if (step) begin
            primary <= (primary + 1) % 16;
            shadow <= (shadow + 1) % 16;
...
functional details 
[stdout]
ERROR (step 1): count=0 expected=1
ERROR (step 2): count=1 expected=2
ERROR (load priority): count=2 expected=c
ERROR (fault detection and safe state): count=c expected=0
ERROR (fault detection and safe state): count_valid=1 expected=0
ERROR (fault detection and safe state): fault_flag=0 expected=1
ERROR (fault detection and safe state): halted=0 expected=1
ERROR (frozen after fault): count=d expected=0
ERROR (frozen after fault): count_valid=1 expected=0
ERROR (frozen after fault): fault_flag=0 expected=1
ERROR (frozen after fault): halted=0 expected=1
ERROR (reload after reset): count=0 expected=5
ERROR (step after reset): count=5 expected=6
TEST_FAILED
/workspace/banchmarks/pashencev/10_fault_tolerant_safety/task_101/tb.v:148: $finish called at 106000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (step 1): count=0 expected=1",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_2 run_20260427_102437_171676_163c0c ok failed failed skipped failed syntax /data/eval/out/run_20260427_102437_171676_163c0c/tmp/deepseek_coder_v2/pashencev__10_fault_tolerant_safety__task_101/sample_2/generated.v:23: error: halted is not a valid l-value in lockstep_event_counter.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\deepseek-coder-v2-16b\rag_off\benchmarks\ilyasov\tasks\ilyasov__10_fault_tolerant_safety__task_101\samples\run_20260427_102437_171676_163c0c__sample_2
generated.v preview 
module lockstep_event_counter (
    input clk,
    input rst_n,
    input load,
    input step,
    input [3:0] load_value,
    input inject_shadow_fault,
    output reg [3:0] count,
    output reg count_valid,
    output reg fault_flag,
    output halted
);

reg [3:0] primary;
reg [3:0] shadow;
reg halt;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        primary <= 4'h0;
        shadow <= 4'h0;
        fault_flag <= 1'b0;
        halted <= 1'b0;
        count_valid <= 1'b0;
    end else if (!halt) begin
        if (load) begin
            primary <= load_value;
            shadow <= load_value;
        end else if (step) begin
            primary <= (primary + 1) % 16;
            shadow <= inject_shadow_fault ? ((shadow + 1) % 16) ^ 4'h1 : (shadow + 1) % 16;
        end
...
syntax details 
[stderr]
/data/eval/out/run_20260427_102437_171676_163c0c/tmp/deepseek_coder_v2/pashencev__10_fault_tolerant_safety__task_101/sample_2/generated.v:23: error: halted is not a valid l-value in lockstep_event_counter.
/data/eval/out/run_20260427_102437_171676_163c0c/tmp/deepseek_coder_v2/pashencev__10_fault_tolerant_safety__task_101/sample_2/generated.v:11:      : halted is declared here as wire.
1 error(s) during elaboration.
functional details 
[stderr]
/data/eval/out/run_20260427_102437_171676_163c0c/tmp/deepseek_coder_v2/pashencev__10_fault_tolerant_safety__task_101/sample_2/functional/generated.v:23: error: halted is not a valid l-value in tb_task_82.dut.
/data/eval/out/run_20260427_102437_171676_163c0c/tmp/deepseek_coder_v2/pashencev__10_fault_tolerant_safety__task_101/sample_2/functional/generated.v:11:      : halted is declared here as wire.
1 error(s) during elaboration.
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "syntax",
    "code": "syntax.iverilog_failed",
    "message": "/data/eval/out/run_20260427_102437_171676_163c0c/tmp/deepseek_coder_v2/pashencev__10_fault_tolerant_safety__task_101/sample_2/generated.v:23: error: halted is not a valid l-value in lockstep_event_counter.\n/data/eval/out/run_20260427_102437_171676_163c0c/tmp/deepseek_coder_v2/pashencev__10_fault_tolerant_safety__task_101/sample_2/generated.v:11:      : halted is declared here as wire.\n1 error(s) during elaboration.\n",
    "retryable": false,
    "details": {}
  },
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/data/eval/out/run_20260427_102437_171676_163c0c/tmp/deepseek_coder_v2/pashencev__10_fault_tolerant_safety__task_101/sample_2/functional/generated.v:23: error: halted is not a valid l-value in tb_task_82.dut.\n/data/eval/out/run_20260427_102437_171676_163c0c/tmp/deepseek_coder_v2/pashencev__10_fault_tolerant_safety__task_101/sample_2/functional/generated.v:11:      : halted is declared here as wire.\n1 error(s) during elaboration.\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": false,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_3 run_20260427_102437_171676_163c0c ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (step 1): count=0 expected=1
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\deepseek-coder-v2-16b\rag_off\benchmarks\ilyasov\tasks\ilyasov__10_fault_tolerant_safety__task_101\samples\run_20260427_102437_171676_163c0c__sample_3
generated.v preview 
module lockstep_event_counter (
    input clk,
    input rst_n,
    input load,
    input step,
    input [3:0] load_value,
    input inject_shadow_fault,
    output reg [3:0] count,
    output reg count_valid,
    output reg fault_flag,
    output reg halted
);

reg [3:0] primary;
reg [3:0] shadow;
reg mismatch;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        primary <= 4'h0;
        shadow <= 4'h0;
        count <= 4'h0;
        count_valid <= 1'b0;
        fault_flag <= 1'b0;
        halted <= 1'b0;
    end else if (!fault_flag) begin
        if (load) begin
            primary <= load_value;
            shadow <= load_value;
        end else if (step) begin
            primary <= (primary + 1) % 16;
            shadow <= (shadow + 1) % 16;
...
functional details 
[stdout]
ERROR (step 1): count=0 expected=1
ERROR (step 2): count=1 expected=2
ERROR (load priority): count=2 expected=c
ERROR (fault detection and safe state): count=c expected=0
ERROR (fault detection and safe state): count_valid=1 expected=0
ERROR (fault detection and safe state): fault_flag=0 expected=1
ERROR (fault detection and safe state): halted=0 expected=1
ERROR (frozen after fault): count=d expected=0
ERROR (frozen after fault): count_valid=1 expected=0
ERROR (frozen after fault): fault_flag=0 expected=1
ERROR (frozen after fault): halted=0 expected=1
ERROR (reload after reset): count=0 expected=5
ERROR (step after reset): count=5 expected=6
TEST_FAILED
/workspace/banchmarks/pashencev/10_fault_tolerant_safety/task_101/tb.v:148: $finish called at 106000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (step 1): count=0 expected=1",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_4 run_20260427_102437_171676_163c0c ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (step 1): count=0 expected=1
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\deepseek-coder-v2-16b\rag_off\benchmarks\ilyasov\tasks\ilyasov__10_fault_tolerant_safety__task_101\samples\run_20260427_102437_171676_163c0c__sample_4
generated.v preview 
module lockstep_event_counter (
    input clk,
    input rst_n,
    input load,
    input step,
    input [3:0] load_value,
    input inject_shadow_fault,
    output reg [3:0] count,
    output reg count_valid,
    output reg fault_flag,
    output reg halted
);

reg [3:0] primary;
reg [3:0] shadow;
reg mismatch;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        primary <= 4'h0;
        shadow <= 4'h0;
        count <= 4'h0;
        count_valid <= 1'b0;
        fault_flag <= 1'b0;
        halted <= 1'b0;
    end else begin
        if (inject_shadow_fault) begin
            shadow <= shadow ^ (1 << 0); // Toggle bit 0 of the shadow counter
        end

        if (load) begin
            primary <= load_value;
...
functional details 
[stdout]
ERROR (step 1): count=0 expected=1
ERROR (step 2): count=1 expected=2
ERROR (load priority): count=2 expected=c
ERROR (fault detection and safe state): count=c expected=0
ERROR (fault detection and safe state): count_valid=1 expected=0
ERROR (fault detection and safe state): fault_flag=0 expected=1
ERROR (fault detection and safe state): halted=0 expected=1
ERROR (frozen after fault): count=d expected=0
ERROR (frozen after fault): count_valid=1 expected=0
ERROR (frozen after fault): fault_flag=0 expected=1
ERROR (frozen after fault): halted=0 expected=1
ERROR (reload after reset): count=0 expected=5
ERROR (step after reset): count=5 expected=6
TEST_FAILED
/workspace/banchmarks/pashencev/10_fault_tolerant_safety/task_101/tb.v:148: $finish called at 106000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (step 1): count=0 expected=1",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_5 run_20260427_102437_171676_163c0c ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (step 1): count=0 expected=1
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\deepseek-coder-v2-16b\rag_off\benchmarks\ilyasov\tasks\ilyasov__10_fault_tolerant_safety__task_101\samples\run_20260427_102437_171676_163c0c__sample_5
generated.v preview 
module lockstep_event_counter (
    input clk,
    input rst_n,
    input load,
    input step,
    input [3:0] load_value,
    input inject_shadow_fault,
    output reg [3:0] count,
    output reg count_valid,
    output reg fault_flag,
    output reg halted
);

reg [3:0] primary;
reg [3:0] shadow;
reg mismatch;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        primary <= 4'h0;
        shadow <= 4'h0;
        count <= 4'h0;
        count_valid <= 1'b0;
        fault_flag <= 1'b0;
        halted <= 1'b0;
    end else if (!fault_flag) begin
        if (load) begin
            primary <= load_value;
            shadow <= load_value;
        end else if (step) begin
            primary <= (primary + 1) % 16;
            shadow <= (shadow + 1) % 16;
...
functional details 
[stdout]
ERROR (step 1): count=0 expected=1
ERROR (step 2): count=1 expected=2
ERROR (load priority): count=2 expected=c
ERROR (fault detection and safe state): count=c expected=0
ERROR (fault detection and safe state): count_valid=1 expected=0
ERROR (fault detection and safe state): fault_flag=0 expected=1
ERROR (fault detection and safe state): halted=0 expected=1
ERROR (frozen after fault): count=d expected=0
ERROR (frozen after fault): count_valid=1 expected=0
ERROR (frozen after fault): fault_flag=0 expected=1
ERROR (frozen after fault): halted=0 expected=1
ERROR (reload after reset): count=0 expected=5
ERROR (step after reset): count=5 expected=6
TEST_FAILED
/workspace/banchmarks/pashencev/10_fault_tolerant_safety/task_101/tb.v:148: $finish called at 106000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (step 1): count=0 expected=1",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_6 run_20260427_102437_171676_163c0c ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (step 1): count=0 expected=1
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\deepseek-coder-v2-16b\rag_off\benchmarks\ilyasov\tasks\ilyasov__10_fault_tolerant_safety__task_101\samples\run_20260427_102437_171676_163c0c__sample_6
generated.v preview 
module lockstep_event_counter (
    input clk,
    input rst_n,
    input load,
    input step,
    input [3:0] load_value,
    input inject_shadow_fault,
    output reg [3:0] count,
    output reg count_valid,
    output reg fault_flag,
    output reg halted
);

reg [3:0] primary;
reg [3:0] shadow;
reg mismatch;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        primary <= 4'h0;
        shadow <= 4'h0;
        count <= 4'h0;
        count_valid <= 1'b0;
        fault_flag <= 1'b0;
        halted <= 1'b0;
    end else begin
        if (inject_shadow_fault) begin
            shadow <= shadow ^ 4'b0001; // Toggle bit 0 of the shadow counter
        end

        if (load) begin
            primary <= load_value;
...
functional details 
[stdout]
ERROR (step 1): count=0 expected=1
ERROR (step 2): count=1 expected=2
ERROR (load priority): count=2 expected=c
ERROR (fault detection and safe state): count=c expected=0
ERROR (fault detection and safe state): count_valid=1 expected=0
ERROR (fault detection and safe state): fault_flag=0 expected=1
ERROR (fault detection and safe state): halted=0 expected=1
ERROR (frozen after fault): count=d expected=0
ERROR (frozen after fault): count_valid=1 expected=0
ERROR (frozen after fault): fault_flag=0 expected=1
ERROR (frozen after fault): halted=0 expected=1
ERROR (reload after reset): count=0 expected=5
ERROR (step after reset): count=5 expected=6
TEST_FAILED
/workspace/banchmarks/pashencev/10_fault_tolerant_safety/task_101/tb.v:148: $finish called at 106000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (step 1): count=0 expected=1",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_7 run_20260427_102437_171676_163c0c ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (step 1): count=0 expected=1
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\deepseek-coder-v2-16b\rag_off\benchmarks\ilyasov\tasks\ilyasov__10_fault_tolerant_safety__task_101\samples\run_20260427_102437_171676_163c0c__sample_7
generated.v preview 
module lockstep_event_counter (
    input clk,
    input rst_n,
    input load,
    input step,
    input [3:0] load_value,
    input inject_shadow_fault,
    output reg [3:0] count,
    output reg count_valid,
    output reg fault_flag,
    output reg halted
);

reg [3:0] primary;
reg [3:0] shadow;
reg mismatch;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        primary <= 4'h0;
        shadow <= 4'h0;
        count <= 4'h0;
        count_valid <= 1'b0;
        fault_flag <= 1'b0;
        halted <= 1'b0;
    end else if (!fault_flag) begin
        if (load) begin
            primary <= load_value;
            shadow <= load_value;
        end else if (step) begin
            primary <= (primary + 1) % 16;
            shadow <= (shadow + 1) % 16;
...
functional details 
[stdout]
ERROR (step 1): count=0 expected=1
ERROR (step 2): count=1 expected=2
ERROR (load priority): count=2 expected=c
ERROR (fault detection and safe state): count=c expected=0
ERROR (fault detection and safe state): count_valid=1 expected=0
ERROR (fault detection and safe state): fault_flag=0 expected=1
ERROR (fault detection and safe state): halted=0 expected=1
ERROR (frozen after fault): count=d expected=0
ERROR (frozen after fault): count_valid=1 expected=0
ERROR (frozen after fault): fault_flag=0 expected=1
ERROR (frozen after fault): halted=0 expected=1
ERROR (reload after reset): count=0 expected=5
ERROR (step after reset): count=5 expected=6
TEST_FAILED
/workspace/banchmarks/pashencev/10_fault_tolerant_safety/task_101/tb.v:148: $finish called at 106000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (step 1): count=0 expected=1",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_8 run_20260427_102437_171676_163c0c ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (step 1): count=0 expected=1
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\deepseek-coder-v2-16b\rag_off\benchmarks\ilyasov\tasks\ilyasov__10_fault_tolerant_safety__task_101\samples\run_20260427_102437_171676_163c0c__sample_8
generated.v preview 
module lockstep_event_counter (
    input clk,
    input rst_n,
    input load,
    input step,
    input [3:0] load_value,
    input inject_shadow_fault,
    output reg [3:0] count,
    output reg count_valid,
    output reg fault_flag,
    output reg halted
);

reg [3:0] primary;
reg [3:0] shadow;
reg mismatch;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        primary <= 4'h0;
        shadow <= 4'h0;
        count <= 4'h0;
        count_valid <= 1'b0;
        fault_flag <= 1'b0;
        halted <= 1'b0;
    end else if (!fault_flag) begin
        if (load) begin
            primary <= load_value;
            shadow <= load_value;
        end else if (step) begin
            primary <= (primary + 1) % 16;
            shadow <= (shadow + 1) % 16;
...
functional details 
[stdout]
ERROR (step 1): count=0 expected=1
ERROR (step 2): count=1 expected=2
ERROR (load priority): count=2 expected=c
ERROR (fault detection and safe state): count=c expected=0
ERROR (fault detection and safe state): count_valid=1 expected=0
ERROR (fault detection and safe state): fault_flag=0 expected=1
ERROR (fault detection and safe state): halted=0 expected=1
ERROR (frozen after fault): count=d expected=0
ERROR (frozen after fault): count_valid=1 expected=0
ERROR (frozen after fault): fault_flag=0 expected=1
ERROR (frozen after fault): halted=0 expected=1
ERROR (reload after reset): count=0 expected=5
ERROR (step after reset): count=5 expected=6
TEST_FAILED
/workspace/banchmarks/pashencev/10_fault_tolerant_safety/task_101/tb.v:148: $finish called at 106000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (step 1): count=0 expected=1",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_9 run_20260427_102437_171676_163c0c ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (step 1): count=0 expected=1
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\deepseek-coder-v2-16b\rag_off\benchmarks\ilyasov\tasks\ilyasov__10_fault_tolerant_safety__task_101\samples\run_20260427_102437_171676_163c0c__sample_9
generated.v preview 
module lockstep_event_counter (
    input clk,
    input rst_n,
    input load,
    input step,
    input [3:0] load_value,
    input inject_shadow_fault,
    output reg [3:0] count,
    output reg count_valid,
    output reg fault_flag,
    output reg halted
);

reg [3:0] primary;
reg [3:0] shadow;
reg mismatch;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        primary <= 4'h0;
        shadow <= 4'h0;
        count <= 4'h0;
        count_valid <= 1'b0;
        fault_flag <= 1'b0;
        halted <= 1'b0;
    end else begin
        if (inject_shadow_fault) begin
            shadow <= shadow ^ (1 << 0); // Toggle bit 0 of the shadow counter
        end

        if (load) begin
            primary <= load_value;
...
functional details 
[stdout]
ERROR (step 1): count=0 expected=1
ERROR (step 2): count=1 expected=2
ERROR (load priority): count=2 expected=c
ERROR (fault detection and safe state): count=c expected=0
ERROR (fault detection and safe state): count_valid=1 expected=0
ERROR (fault detection and safe state): fault_flag=0 expected=1
ERROR (fault detection and safe state): halted=0 expected=1
ERROR (frozen after fault): count=d expected=0
ERROR (frozen after fault): count_valid=1 expected=0
ERROR (frozen after fault): fault_flag=0 expected=1
ERROR (frozen after fault): halted=0 expected=1
ERROR (reload after reset): count=0 expected=5
ERROR (step after reset): count=5 expected=6
TEST_FAILED
/workspace/banchmarks/pashencev/10_fault_tolerant_safety/task_101/tb.v:148: $finish called at 106000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (step 1): count=0 expected=1",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_10 run_20260427_102437_171676_163c0c ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (step 1): count=0 expected=1
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\deepseek-coder-v2-16b\rag_off\benchmarks\ilyasov\tasks\ilyasov__10_fault_tolerant_safety__task_101\samples\run_20260427_102437_171676_163c0c__sample_10
generated.v preview 
module lockstep_event_counter (
    input clk,
    input rst_n,
    input load,
    input step,
    input [3:0] load_value,
    input inject_shadow_fault,
    output reg [3:0] count,
    output reg count_valid,
    output reg fault_flag,
    output reg halted
);

reg [3:0] primary;
reg [3:0] shadow;
reg mismatch;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        primary <= 4'h0;
        shadow <= 4'h0;
        count <= 4'h0;
        count_valid <= 1'b0;
        fault_flag <= 1'b0;
        halted <= 1'b0;
    end else begin
        if (inject_shadow_fault) begin
            shadow <= shadow ^ 4'b0001; // Toggle bit 0 of the shadow counter
        end

        if (load) begin
            primary <= load_value;
...
functional details 
[stdout]
ERROR (step 1): count=0 expected=1
ERROR (step 2): count=1 expected=2
ERROR (load priority): count=2 expected=c
ERROR (fault detection and safe state): count=c expected=0
ERROR (fault detection and safe state): count_valid=1 expected=0
ERROR (fault detection and safe state): fault_flag=0 expected=1
ERROR (fault detection and safe state): halted=0 expected=1
ERROR (frozen after fault): count=d expected=0
ERROR (frozen after fault): count_valid=1 expected=0
ERROR (frozen after fault): fault_flag=0 expected=1
ERROR (frozen after fault): halted=0 expected=1
ERROR (reload after reset): count=0 expected=5
ERROR (step after reset): count=5 expected=6
TEST_FAILED
/workspace/banchmarks/pashencev/10_fault_tolerant_safety/task_101/tb.v:148: $finish called at 106000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (step 1): count=0 expected=1",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}