Назад к моделям Назад к профилю модели

deepseek-coder-v2:16b | RAG on

13_rtllm_memory / task_02 | LIFObuffer

benchmarkrtllm
task_idrtllm/13_rtllm_memory/task_02
samples_total10
final_success_samples2
final_success_rate_samples20.0%
functional_pass_rate_samples20.0%
synth_pass_rate_samples20.0%
source_runsrun_20260426_224416_826723_5f6af1

Что показывает эта страница

Здесь перечислены все реальные попытки этой модели на одной задаче. По каждой попытке можно увидеть, до какой стадии она дошла, где именно сломалась и какое сообщение об ошибке вернулось из syntax, functional или synthesis.

Samples

sample run extract_ok syntax_ok functional_ok openlane_ok final_success failure_stage failure_reason details
sample_1 run_20260426_224416_826723_5f6af1 ok failed failed skipped failed syntax /data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_1/generated.v:24: error: dataOut is not a valid l-value in LIFObuffer.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\deepseek-coder-v2-16b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_memory__task_02\samples\run_20260426_224416_826723_5f6af1__sample_1
generated.v preview 
module LIFObuffer (
    input [3:0] dataIn,
    input RW, EN, Rst, Clk,
    output EMPTY, FULL,
    output [3:0] dataOut
);

    reg [3:0] stack_mem [0:3]; // 4-entry stack memory
    reg [1:0] SP; // Stack pointer

    always @(posedge Clk) begin
        if (Rst) begin
            for (int i = 0; i < 4; i = i + 1) begin
                stack_mem[i] <= 4'b0;
            end
            SP <= 2'b11; // Stack pointer set to 4, indicating empty buffer
        end else if (EN) begin
            if (RW == 0 && SP != 2'b00 && FULL == 0) begin
                // Write operation: push dataIn onto the stack
                stack_mem[SP] <= dataIn;
                SP <= SP - 1;
            end else if (RW == 1 && SP != 2'b11 && EMPTY == 0) begin
                // Read operation: pop data from the stack into dataOut
                dataOut <= stack_mem[SP + 1];
                SP <= SP + 1;
            end
        end
    end

    assign FULL = (SP == 2'b00) ? 1 : 0;
    assign EMPTY = (SP == 2'b11) ? 1 : 0;
...
syntax details 
[stderr]
/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_1/generated.v:24: error: dataOut is not a valid l-value in LIFObuffer.
/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_1/generated.v:5:      : dataOut is declared here as wire.
1 error(s) during elaboration.
functional details 
[stderr]
/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_1/functional/generated.v:24: error: dataOut is not a valid l-value in LIFObuffer_tb.uut.
/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_1/functional/generated.v:5:      : dataOut is declared here as wire.
1 error(s) during elaboration.
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "syntax",
    "code": "syntax.iverilog_failed",
    "message": "/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_1/generated.v:24: error: dataOut is not a valid l-value in LIFObuffer.\n/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_1/generated.v:5:      : dataOut is declared here as wire.\n1 error(s) during elaboration.\n",
    "retryable": false,
    "details": {}
  },
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_1/functional/generated.v:24: error: dataOut is not a valid l-value in LIFObuffer_tb.uut.\n/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_1/functional/generated.v:5:      : dataOut is declared here as wire.\n1 error(s) during elaboration.\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": false,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_2 run_20260426_224416_826723_5f6af1 ok failed failed skipped failed syntax /data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_2/generated.v:28: error: dataOut is not a valid l-value in LIFObuffer.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\deepseek-coder-v2-16b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_memory__task_02\samples\run_20260426_224416_826723_5f6af1__sample_2
generated.v preview 
module LIFObuffer (
    input [3:0] dataIn,
    input RW, EN, Rst, Clk,
    output EMPTY, FULL,
    output [3:0] dataOut
);

    reg [3:0] stack_mem [0:3]; // 4-entry stack memory
    reg [1:0] SP; // Stack pointer

    always @(posedge Clk) begin
        if (Rst) begin
            for (int i = 0; i < 4; i = i + 1) begin
                stack_mem[i] <= 4'b0;
            end
            SP <= 2'b11; // Stack pointer set to indicate empty buffer
        end else if (EN) begin
            if (!RW && !FULL) begin
                // Push operation
                stack_mem[SP] <= dataIn;
                if (SP == 0) begin
                    SP <= 2'b01; // Set FULL flag if buffer was empty
                end else begin
                    SP <= SP - 1;
                end
            end else if (RW && !EMPTY) begin
                // Pop operation
                dataOut <= stack_mem[SP];
                stack_mem[SP] <= 4'b0;
                if (SP == 2'b10) begin
                    SP <= 2'b00; // Set EMPTY flag if buffer was full
                end else begin
...
syntax details 
[stderr]
/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_2/generated.v:28: error: dataOut is not a valid l-value in LIFObuffer.
/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_2/generated.v:5:      : dataOut is declared here as wire.
1 error(s) during elaboration.
functional details 
[stderr]
/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_2/functional/generated.v:28: error: dataOut is not a valid l-value in LIFObuffer_tb.uut.
/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_2/functional/generated.v:5:      : dataOut is declared here as wire.
1 error(s) during elaboration.
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "syntax",
    "code": "syntax.iverilog_failed",
    "message": "/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_2/generated.v:28: error: dataOut is not a valid l-value in LIFObuffer.\n/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_2/generated.v:5:      : dataOut is declared here as wire.\n1 error(s) during elaboration.\n",
    "retryable": false,
    "details": {}
  },
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_2/functional/generated.v:28: error: dataOut is not a valid l-value in LIFObuffer_tb.uut.\n/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_2/functional/generated.v:5:      : dataOut is declared here as wire.\n1 error(s) during elaboration.\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": false,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_3 run_20260426_224416_826723_5f6af1 ok failed failed skipped failed syntax /data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_3/generated.v:22: error: dataOut is not a valid l-value in LIFObuffer.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\deepseek-coder-v2-16b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_memory__task_02\samples\run_20260426_224416_826723_5f6af1__sample_3
generated.v preview 
module LIFObuffer (
    input [3:0] dataIn,
    input RW, EN, Rst, Clk,
    output EMPTY, FULL,
    output [3:0] dataOut
);

    reg [3:0] stack_mem [0:3]; // 4-entry stack memory
    reg [1:0] SP; // Stack pointer

    always @(posedge Clk) begin
        if (Rst) begin
            for (int i = 0; i < 4; i = i + 1) begin
                stack_mem[i] <= 4'b0;
            end
            SP <= 2'b11; // Stack pointer set to 4 (indicating empty)
        end else if (EN) begin
            if (RW == 0 && SP != 2'b00) begin // Write operation and not full
                stack_mem[SP] <= dataIn;
                SP <= SP - 1;
            end else if (RW == 1 && SP != 2'b11) begin // Read operation and not empty
                dataOut <= stack_mem[SP];
                stack_mem[SP] <= 4'b0;
                SP <= SP + 1;
            end
        end
    end

    assign EMPTY = (SP == 2'b11);
    assign FULL = (SP == 2'b00);

endmodule
syntax details 
[stderr]
/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_3/generated.v:22: error: dataOut is not a valid l-value in LIFObuffer.
/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_3/generated.v:5:      : dataOut is declared here as wire.
1 error(s) during elaboration.
functional details 
[stderr]
/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_3/functional/generated.v:22: error: dataOut is not a valid l-value in LIFObuffer_tb.uut.
/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_3/functional/generated.v:5:      : dataOut is declared here as wire.
1 error(s) during elaboration.
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "syntax",
    "code": "syntax.iverilog_failed",
    "message": "/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_3/generated.v:22: error: dataOut is not a valid l-value in LIFObuffer.\n/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_3/generated.v:5:      : dataOut is declared here as wire.\n1 error(s) during elaboration.\n",
    "retryable": false,
    "details": {}
  },
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_3/functional/generated.v:22: error: dataOut is not a valid l-value in LIFObuffer_tb.uut.\n/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_3/functional/generated.v:5:      : dataOut is declared here as wire.\n1 error(s) during elaboration.\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": false,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_4 run_20260426_224416_826723_5f6af1 ok failed failed skipped failed syntax /data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_4/generated.v:22: error: dataOut is not a valid l-value in LIFObuffer.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\deepseek-coder-v2-16b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_memory__task_02\samples\run_20260426_224416_826723_5f6af1__sample_4
generated.v preview 
module LIFObuffer (
    input [3:0] dataIn,
    input RW, EN, Rst, Clk,
    output EMPTY, FULL,
    output [3:0] dataOut
);

    reg [3:0] stack_mem [0:3]; // 4-entry stack memory
    reg [1:0] SP; // Stack pointer

    always @(posedge Clk) begin
        if (Rst) begin
            for (int i = 0; i < 4; i = i + 1) begin
                stack_mem[i] <= 4'b0;
            end
            SP <= 2'b11; // Stack pointer set to 4 (indicating empty)
        end else if (EN) begin
            if (RW == 0 && SP != 2'b00) begin // Write operation and not full
                stack_mem[SP] <= dataIn;
                SP <= SP - 1;
            end else if (RW == 1 && SP != 2'b11) begin // Read operation and not empty
                dataOut <= stack_mem[SP];
                stack_mem[SP] <= 4'b0;
                SP <= SP + 1;
            end
        end
    end

    assign EMPTY = (SP == 2'b11);
    assign FULL = (SP == 2'b00);

endmodule
syntax details 
[stderr]
/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_4/generated.v:22: error: dataOut is not a valid l-value in LIFObuffer.
/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_4/generated.v:5:      : dataOut is declared here as wire.
1 error(s) during elaboration.
functional details 
[stderr]
/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_4/functional/generated.v:22: error: dataOut is not a valid l-value in LIFObuffer_tb.uut.
/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_4/functional/generated.v:5:      : dataOut is declared here as wire.
1 error(s) during elaboration.
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "syntax",
    "code": "syntax.iverilog_failed",
    "message": "/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_4/generated.v:22: error: dataOut is not a valid l-value in LIFObuffer.\n/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_4/generated.v:5:      : dataOut is declared here as wire.\n1 error(s) during elaboration.\n",
    "retryable": false,
    "details": {}
  },
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_4/functional/generated.v:22: error: dataOut is not a valid l-value in LIFObuffer_tb.uut.\n/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_4/functional/generated.v:5:      : dataOut is declared here as wire.\n1 error(s) during elaboration.\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": false,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_5 run_20260426_224416_826723_5f6af1 ok ok ok ok ok success Full pipeline success
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\deepseek-coder-v2-16b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_memory__task_02\samples\run_20260426_224416_826723_5f6af1__sample_5
generated.v preview 
module LIFObuffer (
    input [3:0] dataIn,
    input RW, EN, Rst, Clk,
    output EMPTY, FULL,
    output [3:0] dataOut
);

    reg [3:0] stack_mem [0:3]; // 4-entry stack memory
    reg [1:0] SP; // Stack pointer

    always @(posedge Clk) begin
        if (Rst) begin
            for (int i = 0; i < 4; i = i + 1) begin
                stack_mem[i] <= 4'b0;
            end
            SP <= 2'b11; // Stack pointer set to 4 (indicating empty)
        end else if (EN) begin
            if (RW == 0 && SP != 2'b00 && !FULL) begin
                // Write operation
                stack_mem[SP] <= dataIn;
                SP <= SP - 1;
            end else if (RW == 1 && SP != 2'b11 && !EMPTY) begin
                // Read operation
                SP <= SP + 1;
            end
        end
    end

    assign EMPTY = (SP == 2'b11);
    assign FULL = (SP == 2'b00);
    assign dataOut = stack_mem[SP];
...
functional details 
[stdout]
=========== Test completed with           2/20 failures ===========
/workspace/banchmarks/rtllm/13_rtllm_memory/task_02/tb.v:70: $finish called at 265000 (1ps)
synthesis details 
[error]
None
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": true,
  "openlane_ok": true,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": true,
  "success": true
}
sample_6 run_20260426_224416_826723_5f6af1 ok failed failed skipped failed syntax /data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_6/generated.v:28: error: dataOut is not a valid l-value in LIFObuffer.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\deepseek-coder-v2-16b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_memory__task_02\samples\run_20260426_224416_826723_5f6af1__sample_6
generated.v preview 
module LIFObuffer (
    input [3:0] dataIn,
    input RW, EN, Rst, Clk,
    output EMPTY, FULL,
    output [3:0] dataOut
);

    reg [3:0] stack_mem [0:3]; // 4-entry stack memory
    reg [1:0] SP; // Stack pointer

    always @(posedge Clk) begin
        if (Rst) begin
            for (int i = 0; i < 4; i = i + 1) begin
                stack_mem[i] <= 4'b0;
            end
            SP <= 2'b11; // Stack pointer set to indicate empty buffer
        end else if (EN) begin
            if (!RW && !FULL) begin
                // Push operation
                stack_mem[SP] <= dataIn;
                if (SP == 0) begin
                    SP <= 2'b00; // Set FULL flag when pushing to full buffer
                end else begin
                    SP <= SP - 1;
                end
            end else if (RW && !EMPTY) begin
                // Pop operation
                dataOut <= stack_mem[SP];
                stack_mem[SP] <= 4'b0;
                if (SP == 2'b11) begin
                    SP <= 2'b10; // Set EMPTY flag when popping from empty buffer
                end else begin
...
syntax details 
[stderr]
/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_6/generated.v:28: error: dataOut is not a valid l-value in LIFObuffer.
/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_6/generated.v:5:      : dataOut is declared here as wire.
1 error(s) during elaboration.
functional details 
[stderr]
/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_6/functional/generated.v:28: error: dataOut is not a valid l-value in LIFObuffer_tb.uut.
/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_6/functional/generated.v:5:      : dataOut is declared here as wire.
1 error(s) during elaboration.
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "syntax",
    "code": "syntax.iverilog_failed",
    "message": "/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_6/generated.v:28: error: dataOut is not a valid l-value in LIFObuffer.\n/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_6/generated.v:5:      : dataOut is declared here as wire.\n1 error(s) during elaboration.\n",
    "retryable": false,
    "details": {}
  },
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_6/functional/generated.v:28: error: dataOut is not a valid l-value in LIFObuffer_tb.uut.\n/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_6/functional/generated.v:5:      : dataOut is declared here as wire.\n1 error(s) during elaboration.\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": false,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_7 run_20260426_224416_826723_5f6af1 ok ok ok ok ok success Full pipeline success
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\deepseek-coder-v2-16b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_memory__task_02\samples\run_20260426_224416_826723_5f6af1__sample_7
generated.v preview 
module LIFObuffer (
    input [3:0] dataIn,
    input RW, EN, Rst, Clk,
    output EMPTY, FULL,
    output [3:0] dataOut
);

    reg [3:0] stack_mem [0:3]; // 4-entry stack memory
    reg [1:0] SP; // Stack pointer

    always @(posedge Clk) begin
        if (Rst) begin
            for (int i = 0; i < 4; i = i + 1) begin
                stack_mem[i] <= 4'b0;
            end
            SP <= 2'b11; // Stack pointer set to 4 (indicating empty)
        end else if (EN) begin
            if (RW == 0 && SP != 2'b00 && !FULL) begin
                // Write operation
                stack_mem[SP] <= dataIn;
                SP <= SP - 1;
            end else if (RW == 1 && SP != 2'b11 && !EMPTY) begin
                // Read operation
                SP <= SP + 1;
            end
        end
    end

    assign EMPTY = (SP == 2'b11);
    assign FULL = (SP == 2'b00);
    assign dataOut = stack_mem[SP];
...
functional details 
[stdout]
=========== Test completed with           2/20 failures ===========
/workspace/banchmarks/rtllm/13_rtllm_memory/task_02/tb.v:70: $finish called at 265000 (1ps)
synthesis details 
[error]
None
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": true,
  "openlane_ok": true,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": true,
  "success": true
}
sample_8 run_20260426_224416_826723_5f6af1 ok failed failed skipped failed syntax /data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_8/generated.v:28: error: dataOut is not a valid l-value in LIFObuffer.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\deepseek-coder-v2-16b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_memory__task_02\samples\run_20260426_224416_826723_5f6af1__sample_8
generated.v preview 
module LIFObuffer (
    input [3:0] dataIn,
    input RW, EN, Rst, Clk,
    output EMPTY, FULL,
    output [3:0] dataOut
);

    reg [3:0] stack_mem [0:3]; // 4-entry stack memory
    reg [1:0] SP; // Stack pointer

    always @(posedge Clk) begin
        if (Rst) begin
            for (int i = 0; i < 4; i = i + 1) begin
                stack_mem[i] <= 4'b0;
            end
            SP <= 2'b11; // Stack pointer set to 4 (indicating empty)
        end else if (EN) begin
            if (!RW && !FULL) begin
                // Push operation
                stack_mem[SP] <= dataIn;
                if (SP == 0) begin
                    SP <= 2'b11; // Wrap around to the last entry
                end else begin
                    SP <= SP - 1;
                end
            end else if (RW && !EMPTY) begin
                // Pop operation
                dataOut <= stack_mem[SP];
                if (SP == 2'b11) begin
                    SP <= 0; // Wrap around to the first entry
                end else begin
                    SP <= SP + 1;
...
syntax details 
[stderr]
/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_8/generated.v:28: error: dataOut is not a valid l-value in LIFObuffer.
/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_8/generated.v:5:      : dataOut is declared here as wire.
1 error(s) during elaboration.
functional details 
[stderr]
/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_8/functional/generated.v:28: error: dataOut is not a valid l-value in LIFObuffer_tb.uut.
/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_8/functional/generated.v:5:      : dataOut is declared here as wire.
1 error(s) during elaboration.
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "syntax",
    "code": "syntax.iverilog_failed",
    "message": "/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_8/generated.v:28: error: dataOut is not a valid l-value in LIFObuffer.\n/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_8/generated.v:5:      : dataOut is declared here as wire.\n1 error(s) during elaboration.\n",
    "retryable": false,
    "details": {}
  },
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_8/functional/generated.v:28: error: dataOut is not a valid l-value in LIFObuffer_tb.uut.\n/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_8/functional/generated.v:5:      : dataOut is declared here as wire.\n1 error(s) during elaboration.\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": false,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_9 run_20260426_224416_826723_5f6af1 ok failed failed skipped failed syntax /data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_9/generated.v:28: error: dataOut is not a valid l-value in LIFObuffer.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\deepseek-coder-v2-16b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_memory__task_02\samples\run_20260426_224416_826723_5f6af1__sample_9
generated.v preview 
module LIFObuffer (
    input [3:0] dataIn,
    input RW, EN, Rst, Clk,
    output EMPTY, FULL,
    output [3:0] dataOut
);

    reg [3:0] stack_mem [0:3]; // 4-entry stack memory
    reg [1:0] SP; // Stack pointer

    always @(posedge Clk) begin
        if (Rst) begin
            for (int i = 0; i < 4; i = i + 1) begin
                stack_mem[i] <= 4'b0;
            end
            SP <= 2'b11; // Stack pointer set to indicate empty buffer
        end else if (EN) begin
            if (!RW && !FULL) begin
                // Push operation
                stack_mem[SP] <= dataIn;
                if (SP == 0) begin
                    SP <= 2'b00; // Set FULL flag if buffer was empty
                end else begin
                    SP <= SP - 1;
                end
            end else if (RW && !EMPTY) begin
                // Pop operation
                dataOut <= stack_mem[SP];
                stack_mem[SP] <= 4'b0;
                if (SP == 2'b11) begin
                    SP <= 2'b10; // Set EMPTY flag if buffer was full
                end else begin
...
syntax details 
[stderr]
/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_9/generated.v:28: error: dataOut is not a valid l-value in LIFObuffer.
/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_9/generated.v:5:      : dataOut is declared here as wire.
1 error(s) during elaboration.
functional details 
[stderr]
/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_9/functional/generated.v:28: error: dataOut is not a valid l-value in LIFObuffer_tb.uut.
/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_9/functional/generated.v:5:      : dataOut is declared here as wire.
1 error(s) during elaboration.
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "syntax",
    "code": "syntax.iverilog_failed",
    "message": "/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_9/generated.v:28: error: dataOut is not a valid l-value in LIFObuffer.\n/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_9/generated.v:5:      : dataOut is declared here as wire.\n1 error(s) during elaboration.\n",
    "retryable": false,
    "details": {}
  },
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_9/functional/generated.v:28: error: dataOut is not a valid l-value in LIFObuffer_tb.uut.\n/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_9/functional/generated.v:5:      : dataOut is declared here as wire.\n1 error(s) during elaboration.\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": false,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_10 run_20260426_224416_826723_5f6af1 ok failed failed skipped failed syntax /data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_10/generated.v:28: error: dataOut is not a valid l-value in LIFObuffer.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\deepseek-coder-v2-16b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_memory__task_02\samples\run_20260426_224416_826723_5f6af1__sample_10
generated.v preview 
module LIFObuffer (
    input [3:0] dataIn,
    input RW, EN, Rst, Clk,
    output EMPTY, FULL,
    output [3:0] dataOut
);

    reg [3:0] stack_mem [0:3]; // 4-entry stack memory
    reg [1:0] SP; // Stack pointer

    always @(posedge Clk) begin
        if (Rst) begin
            for (int i = 0; i < 4; i = i + 1) begin
                stack_mem[i] <= 4'b0;
            end
            SP <= 2'b11; // Stack pointer set to 4 (indicating empty)
        end else if (EN) begin
            if (!RW && !FULL) begin
                // Push operation
                stack_mem[SP] <= dataIn;
                if (SP == 0) begin
                    SP <= 2'b11; // Wrap around to the last entry
                end else begin
                    SP <= SP - 1;
                end
            end else if (RW && !EMPTY) begin
                // Pop operation
                dataOut <= stack_mem[SP];
                stack_mem[SP] <= 4'b0;
                if (SP == 2'b11) begin
                    SP <= 0; // Wrap around to the first entry
                end else begin
...
syntax details 
[stderr]
/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_10/generated.v:28: error: dataOut is not a valid l-value in LIFObuffer.
/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_10/generated.v:5:      : dataOut is declared here as wire.
1 error(s) during elaboration.
functional details 
[stderr]
/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_10/functional/generated.v:28: error: dataOut is not a valid l-value in LIFObuffer_tb.uut.
/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_10/functional/generated.v:5:      : dataOut is declared here as wire.
1 error(s) during elaboration.
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "syntax",
    "code": "syntax.iverilog_failed",
    "message": "/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_10/generated.v:28: error: dataOut is not a valid l-value in LIFObuffer.\n/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_10/generated.v:5:      : dataOut is declared here as wire.\n1 error(s) during elaboration.\n",
    "retryable": false,
    "details": {}
  },
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_10/functional/generated.v:28: error: dataOut is not a valid l-value in LIFObuffer_tb.uut.\n/data/eval/out/run_20260426_224416_826723_5f6af1/tmp/deepseek_coder_v2/rtllm__13_rtllm_memory__task_02/sample_10/functional/generated.v:5:      : dataOut is declared here as wire.\n1 error(s) during elaboration.\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": false,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}