Назад к моделям Назад к профилю модели

deepseek-coder-v2:16b | RAG on

13_rtllm_miscellaneous / task_20 | square_wave

benchmarkrtllm
task_idrtllm/13_rtllm_miscellaneous/task_20
samples_total10
final_success_samples10
final_success_rate_samples100.0%
functional_pass_rate_samples100.0%
synth_pass_rate_samples100.0%
source_runsrun_20260426_224416_826723_5f6af1

Что показывает эта страница

Здесь перечислены все реальные попытки этой модели на одной задаче. По каждой попытке можно увидеть, до какой стадии она дошла, где именно сломалась и какое сообщение об ошибке вернулось из syntax, functional или synthesis.

Samples

sample run extract_ok syntax_ok functional_ok openlane_ok final_success failure_stage failure_reason details
sample_1 run_20260426_224416_826723_5f6af1 ok ok ok ok ok success Full pipeline success
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\deepseek-coder-v2-16b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_20\samples\run_20260426_224416_826723_5f6af1__sample_1
generated.v preview 
module square_wave (
    input clk,          // Clock signal that drives the module.
    input [7:0] freq,   // Frequency control, specifying how often the square wave toggles.
    output reg wave_out // Square wave output signal.
);

reg [7:0] count;      // Counter register used to track cycles between wave toggles.

always @(posedge clk) begin
    if (count == freq - 1) begin
        count <= 0;
        wave_out <= ~wave_out;
    end else begin
        count <= count + 1;
    end
end

endmodule
functional details 
[stdout]
=========== Your Design Passed ===========
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_20/tb.v:36: $finish called at 1000 (1s)
synthesis details 
[error]
None
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": true,
  "openlane_ok": true,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": true,
  "success": true
}
sample_2 run_20260426_224416_826723_5f6af1 ok ok ok ok ok success Full pipeline success
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\deepseek-coder-v2-16b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_20\samples\run_20260426_224416_826723_5f6af1__sample_2
generated.v preview 
module square_wave (
    input clk,          // Clock signal that drives the module.
    input [7:0] freq,   // Frequency control, specifying how often the square wave toggles.
    output reg wave_out // Square wave output signal.
);

reg [7:0] count;      // Counter register used to track cycles between wave toggles.

always @(posedge clk) begin
    if (count == freq - 1) begin
        count <= 0;
        wave_out <= ~wave_out;
    end else begin
        count <= count + 1;
    end
end

endmodule
functional details 
[stdout]
=========== Your Design Passed ===========
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_20/tb.v:36: $finish called at 1000 (1s)
synthesis details 
[error]
None
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": true,
  "openlane_ok": true,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": true,
  "success": true
}
sample_3 run_20260426_224416_826723_5f6af1 ok ok ok ok ok success Full pipeline success
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\deepseek-coder-v2-16b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_20\samples\run_20260426_224416_826723_5f6af1__sample_3
generated.v preview 
module square_wave (
    input clk,          // Clock signal that drives the module.
    input [7:0] freq,   // Frequency control, specifying how often the square wave toggles.
    output reg wave_out // Square wave output signal.
);

reg [7:0] count;      // Counter register used to track cycles between wave toggles.

always @(posedge clk) begin
    if (count == freq - 1) begin
        count <= 0;
        wave_out <= ~wave_out; // Toggle the square wave output.
    end else begin
        count <= count + 1;   // Increment the counter unless it reaches the frequency value.
    end
end

endmodule
functional details 
[stdout]
=========== Your Design Passed ===========
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_20/tb.v:36: $finish called at 1000 (1s)
synthesis details 
[error]
None
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": true,
  "openlane_ok": true,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": true,
  "success": true
}
sample_4 run_20260426_224416_826723_5f6af1 ok ok ok ok ok success Full pipeline success
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\deepseek-coder-v2-16b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_20\samples\run_20260426_224416_826723_5f6af1__sample_4
generated.v preview 
module square_wave (
    input clk,          // Clock signal that drives the module.
    input [7:0] freq,   // Frequency control, specifying how often the square wave toggles.
    output reg wave_out // Square wave output signal.
);

reg [7:0] count;      // Counter register used to track cycles between wave toggles.

always @(posedge clk) begin
    if (count == freq - 1) begin
        count <= 0;
        wave_out <= ~wave_out; // Toggle the square wave output.
    end else begin
        count <= count + 1;   // Increment the counter unless it reaches the frequency value.
    end
end

endmodule
functional details 
[stdout]
=========== Your Design Passed ===========
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_20/tb.v:36: $finish called at 1000 (1s)
synthesis details 
[error]
None
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": true,
  "openlane_ok": true,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": true,
  "success": true
}
sample_5 run_20260426_224416_826723_5f6af1 ok ok ok ok ok success Full pipeline success
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\deepseek-coder-v2-16b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_20\samples\run_20260426_224416_826723_5f6af1__sample_5
generated.v preview 
module square_wave (
    input clk,          // Clock signal that drives the module.
    input [7:0] freq,   // Frequency control, specifying how often the square wave toggles.
    output reg wave_out // Square wave output signal.
);

reg [7:0] count;      // Counter register used to track cycles between wave toggles.

always @(posedge clk) begin
    if (count == freq - 1) begin
        count <= 0;
        wave_out <= ~wave_out;
    end else begin
        count <= count + 1;
    end
end

endmodule
functional details 
[stdout]
=========== Your Design Passed ===========
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_20/tb.v:36: $finish called at 1000 (1s)
synthesis details 
[error]
None
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": true,
  "openlane_ok": true,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": true,
  "success": true
}
sample_6 run_20260426_224416_826723_5f6af1 ok ok ok ok ok success Full pipeline success
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\deepseek-coder-v2-16b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_20\samples\run_20260426_224416_826723_5f6af1__sample_6
generated.v preview 
module square_wave (
    input clk,          // Clock signal that drives the module.
    input [7:0] freq,   // Frequency control, specifying how often the square wave toggles.
    output reg wave_out // Square wave output signal.
);

reg [7:0] count;      // Counter register used to track cycles between wave toggles.

always @(posedge clk) begin
    if (count == freq - 1) begin
        count <= 0;
        wave_out <= ~wave_out; // Toggle the square wave output.
    end else begin
        count <= count + 1;   // Increment the counter unless it reaches the frequency value.
    end
end

endmodule
functional details 
[stdout]
=========== Your Design Passed ===========
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_20/tb.v:36: $finish called at 1000 (1s)
synthesis details 
[error]
None
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": true,
  "openlane_ok": true,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": true,
  "success": true
}
sample_7 run_20260426_224416_826723_5f6af1 ok ok ok ok ok success Full pipeline success
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\deepseek-coder-v2-16b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_20\samples\run_20260426_224416_826723_5f6af1__sample_7
generated.v preview 
module square_wave (
    input clk,          // Clock signal that drives the module.
    input [7:0] freq,   // Frequency control, specifying how often the square wave toggles.
    output reg wave_out // Square wave output signal.
);

reg [7:0] count;      // Counter register used to track cycles between wave toggles.

always @(posedge clk) begin
    if (count == freq - 1) begin
        count <= 0;
        wave_out <= ~wave_out; // Toggle the square wave output.
    end else begin
        count <= count + 1;   // Increment the counter unless it reaches the frequency value.
    end
end

endmodule
functional details 
[stdout]
=========== Your Design Passed ===========
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_20/tb.v:36: $finish called at 1000 (1s)
synthesis details 
[error]
None
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": true,
  "openlane_ok": true,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": true,
  "success": true
}
sample_8 run_20260426_224416_826723_5f6af1 ok ok ok ok ok success Full pipeline success
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\deepseek-coder-v2-16b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_20\samples\run_20260426_224416_826723_5f6af1__sample_8
generated.v preview 
module square_wave (
    input clk,          // Clock signal that drives the module.
    input [7:0] freq,   // Frequency control, specifying how often the square wave toggles.
    output reg wave_out // Square wave output signal.
);

reg [7:0] count;      // Counter register used to track cycles between wave toggles.

always @(posedge clk) begin
    if (count == freq - 1) begin
        count <= 0;
        wave_out <= ~wave_out; // Toggle the square wave output.
    end else begin
        count <= count + 1;   // Increment the counter unless it reaches the frequency value.
    end
end

endmodule
functional details 
[stdout]
=========== Your Design Passed ===========
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_20/tb.v:36: $finish called at 1000 (1s)
synthesis details 
[error]
None
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": true,
  "openlane_ok": true,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": true,
  "success": true
}
sample_9 run_20260426_224416_826723_5f6af1 ok ok ok ok ok success Full pipeline success
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\deepseek-coder-v2-16b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_20\samples\run_20260426_224416_826723_5f6af1__sample_9
generated.v preview 
module square_wave (
    input clk,          // Clock signal that drives the module.
    input [7:0] freq,   // Frequency control, specifying how often the square wave toggles.
    output reg wave_out // Square wave output signal.
);

reg [7:0] count;      // Counter register used to track cycles between wave toggles.

always @(posedge clk) begin
    if (count == freq - 1) begin
        count <= 0;
        wave_out <= ~wave_out; // Toggle the square wave output.
    end else begin
        count <= count + 1;   // Increment the counter unless it reaches the frequency value.
    end
end

endmodule
functional details 
[stdout]
=========== Your Design Passed ===========
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_20/tb.v:36: $finish called at 1000 (1s)
synthesis details 
[error]
None
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": true,
  "openlane_ok": true,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": true,
  "success": true
}
sample_10 run_20260426_224416_826723_5f6af1 ok ok ok ok ok success Full pipeline success
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\deepseek-coder-v2-16b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_20\samples\run_20260426_224416_826723_5f6af1__sample_10
generated.v preview 
module square_wave (
    input clk,          // Clock signal that drives the module.
    input [7:0] freq,   // Frequency control, specifying how often the square wave toggles.
    output reg wave_out // Square wave output signal.
);

reg [7:0] count;      // Counter register used to track cycles between wave toggles.

always @(posedge clk) begin
    if (count == freq - 1) begin
        count <= 0;
        wave_out <= ~wave_out;
    end else begin
        count <= count + 1;
    end
end

endmodule
functional details 
[stdout]
=========== Your Design Passed ===========
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_20/tb.v:36: $finish called at 1000 (1s)
synthesis details 
[error]
None
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": true,
  "openlane_ok": true,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": true,
  "success": true
}