Назад к моделям Назад к профилю модели

qwen3-coder:30b | RAG off

09_constraint_aware_timing / task_90 | dual_mac_timing

benchmarkilyasov
task_idilyasov/09_constraint_aware_timing/task_90
samples_total10
final_success_samples0
final_success_rate_samples0.0%
functional_pass_rate_samples0.0%
synth_pass_rate_samples0.0%
source_runsrun_20260426_175047_007550_9b8266

Что показывает эта страница

Здесь перечислены все реальные попытки этой модели на одной задаче. По каждой попытке можно увидеть, до какой стадии она дошла, где именно сломалась и какое сообщение об ошибке вернулось из syntax, functional или synthesis.

Samples

sample run extract_ok syntax_ok functional_ok openlane_ok final_success failure_stage failure_reason details
sample_1 run_20260426_175047_007550_9b8266 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. FAIL: y changed while out_valid was low.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_off\benchmarks\ilyasov\tasks\ilyasov__09_constraint_aware_timing__task_90\samples\run_20260426_175047_007550_9b8266__sample_1
generated.v preview 
module dual_mac_timing (
    input clk,
    input rst_n,
    input in_valid,
    input signed [15:0] a,
    input signed [15:0] b,
    input signed [15:0] c,
    input signed [15:0] d,
    output out_valid,
    output signed [32:0] y
);

    reg signed [32:0] result_reg;
    reg out_valid_reg;
    reg valid_reg;

    always @(posedge clk or negedge rst_n) begin
        if (!rst_n) begin
            out_valid_reg <= 1'b0;
            valid_reg <= 1'b0;
            result_reg <= 33'd0;
        end else begin
            if (in_valid) begin
                result_reg <= (a * b) + (c * d);
                valid_reg <= 1'b1;
            end else begin
                valid_reg <= 1'b0;
            end
        end
    end

    always @(posedge clk or negedge rst_n) begin
...
functional details 
[stdout]
FAIL: y changed while out_valid was low.
TEST_FAILED
/workspace/banchmarks/pashencev/09_constraint_aware_timing/task_90/tb.v:120: $finish called at 136000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. FAIL: y changed while out_valid was low.",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_2 run_20260426_175047_007550_9b8266 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. FAIL: y changed while out_valid was low.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_off\benchmarks\ilyasov\tasks\ilyasov__09_constraint_aware_timing__task_90\samples\run_20260426_175047_007550_9b8266__sample_2
generated.v preview 
module dual_mac_timing (
    input        clk,
    input        rst_n,
    input        in_valid,
    input signed [15:0] a,
    input signed [15:0] b,
    input signed [15:0] c,
    input signed [15:0] d,
    output       out_valid,
    output signed [32:0] y
);

    reg signed [32:0] mac_result;
    reg               output_valid_reg;
    reg               input_latch;

    always @(posedge clk or negedge rst_n) begin
        if (!rst_n) begin
            output_valid_reg <= 1'b0;
            input_latch <= 1'b0;
        end else begin
            if (in_valid) begin
                mac_result <= (a * b) + (c * d);
                input_latch <= 1'b1;
            end else begin
                input_latch <= 1'b0;
            end
        end
    end

    always @(posedge clk or negedge rst_n) begin
        if (!rst_n) begin
...
functional details 
[stdout]
FAIL: y changed while out_valid was low.
TEST_FAILED
/workspace/banchmarks/pashencev/09_constraint_aware_timing/task_90/tb.v:120: $finish called at 136000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. FAIL: y changed while out_valid was low.",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_3 run_20260426_175047_007550_9b8266 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. FAIL: out_valid did not match the required 1-cycle latency.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_off\benchmarks\ilyasov\tasks\ilyasov__09_constraint_aware_timing__task_90\samples\run_20260426_175047_007550_9b8266__sample_3
generated.v preview 
module dual_mac_timing (
    input        clk,
    input        rst_n,
    input        in_valid,
    input signed [15:0] a,
    input signed [15:0] b,
    input signed [15:0] c,
    input signed [15:0] d,
    output       out_valid,
    output signed [32:0] y
);

    reg signed [32:0] result_reg;
    reg               valid_reg;
    reg               valid_d;

    always @(posedge clk or negedge rst_n) begin
        if (!rst_n) begin
            valid_reg <= 1'b0;
            result_reg <= 33'd0;
        end else begin
            valid_reg <= valid_d;
            if (in_valid)
                result_reg <= (a * b) + (c * d);
        end
    end

    assign out_valid = valid_reg;
    assign y = result_reg;

    always @(*) begin
        valid_d = valid_reg;
...
functional details 
[stdout]
FAIL: out_valid did not match the required 1-cycle latency.
TEST_FAILED
/workspace/banchmarks/pashencev/09_constraint_aware_timing/task_90/tb.v:120: $finish called at 136000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. FAIL: out_valid did not match the required 1-cycle latency.",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_4 run_20260426_175047_007550_9b8266 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. FAIL: out_valid did not match the required 1-cycle latency.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_off\benchmarks\ilyasov\tasks\ilyasov__09_constraint_aware_timing__task_90\samples\run_20260426_175047_007550_9b8266__sample_4
generated.v preview 
module dual_mac_timing (
    input        clk,
    input        rst_n,
    input        in_valid,
    input signed [15:0] a,
    input signed [15:0] b,
    input signed [15:0] c,
    input signed [15:0] d,
    output       out_valid,
    output signed [32:0] y
);

    reg signed [32:0] result_reg;
    reg               valid_reg;
    reg               valid_d;

    always @(posedge clk or negedge rst_n) begin
        if (!rst_n) begin
            valid_reg <= 1'b0;
            result_reg <= 33'h0;
        end else begin
            valid_reg <= valid_d;
            if (in_valid)
                result_reg <= (a * b) + (c * d);
        end
    end

    assign out_valid = valid_reg;
    assign y = result_reg;

    always @(*) begin
        valid_d = valid_reg;
...
functional details 
[stdout]
FAIL: out_valid did not match the required 1-cycle latency.
TEST_FAILED
/workspace/banchmarks/pashencev/09_constraint_aware_timing/task_90/tb.v:120: $finish called at 136000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. FAIL: out_valid did not match the required 1-cycle latency.",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_5 run_20260426_175047_007550_9b8266 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. FAIL: out_valid did not match the required 1-cycle latency.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_off\benchmarks\ilyasov\tasks\ilyasov__09_constraint_aware_timing__task_90\samples\run_20260426_175047_007550_9b8266__sample_5
generated.v preview 
module dual_mac_timing (
    input        clk,
    input        rst_n,
    input        in_valid,
    input signed [15:0] a,
    input signed [15:0] b,
    input signed [15:0] c,
    input signed [15:0] d,
    output       out_valid,
    output signed [32:0] y
);

    reg signed [32:0] result_reg;
    reg               valid_reg;
    reg               valid_d;

    always @(posedge clk or negedge rst_n) begin
        if (!rst_n) begin
            valid_reg <= 1'b0;
            result_reg <= 33'h0;
        end else begin
            valid_reg <= valid_d;
            if (in_valid)
                result_reg <= (a * b) + (c * d);
        end
    end

    assign out_valid = valid_reg;
    assign y = result_reg;

    always @(*) begin
        valid_d = valid_reg;
...
functional details 
[stdout]
FAIL: out_valid did not match the required 1-cycle latency.
TEST_FAILED
/workspace/banchmarks/pashencev/09_constraint_aware_timing/task_90/tb.v:120: $finish called at 136000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. FAIL: out_valid did not match the required 1-cycle latency.",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_6 run_20260426_175047_007550_9b8266 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. FAIL: out_valid did not match the required 1-cycle latency.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_off\benchmarks\ilyasov\tasks\ilyasov__09_constraint_aware_timing__task_90\samples\run_20260426_175047_007550_9b8266__sample_6
generated.v preview 
module dual_mac_timing (
    input        clk,
    input        rst_n,
    input        in_valid,
    input signed [15:0] a,
    input signed [15:0] b,
    input signed [15:0] c,
    input signed [15:0] d,
    output       out_valid,
    output signed [32:0] y
);

    reg signed [32:0] result_reg;
    reg               valid_reg;
    reg               valid_d;

    always @(posedge clk or negedge rst_n) begin
        if (!rst_n) begin
            valid_reg <= 1'b0;
            result_reg <= 33'd0;
        end else begin
            valid_reg <= valid_d;
            if (in_valid)
                result_reg <= (a * b) + (c * d);
        end
    end

    assign out_valid = valid_reg;
    assign y = result_reg;

    always @(*) begin
        valid_d = valid_reg;
...
functional details 
[stdout]
FAIL: out_valid did not match the required 1-cycle latency.
TEST_FAILED
/workspace/banchmarks/pashencev/09_constraint_aware_timing/task_90/tb.v:120: $finish called at 136000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. FAIL: out_valid did not match the required 1-cycle latency.",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_7 run_20260426_175047_007550_9b8266 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. FAIL: out_valid did not match the required 1-cycle latency.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_off\benchmarks\ilyasov\tasks\ilyasov__09_constraint_aware_timing__task_90\samples\run_20260426_175047_007550_9b8266__sample_7
generated.v preview 
module dual_mac_timing (
    input        clk,
    input        rst_n,
    input        in_valid,
    input signed [15:0] a,
    input signed [15:0] b,
    input signed [15:0] c,
    input signed [15:0] d,
    output       out_valid,
    output signed [32:0] y
);

    reg signed [32:0] result_reg;
    reg               valid_reg;
    reg               valid_d;

    always @(posedge clk or negedge rst_n) begin
        if (!rst_n) begin
            valid_reg <= 1'b0;
            result_reg <= 33'h0;
        end else begin
            valid_reg <= valid_d;
            if (in_valid)
                result_reg <= (a * b) + (c * d);
        end
    end

    assign out_valid = valid_reg;
    assign y = result_reg;

    always @(*) begin
        valid_d = valid_reg;
...
functional details 
[stdout]
FAIL: out_valid did not match the required 1-cycle latency.
TEST_FAILED
/workspace/banchmarks/pashencev/09_constraint_aware_timing/task_90/tb.v:120: $finish called at 136000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. FAIL: out_valid did not match the required 1-cycle latency.",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_8 run_20260426_175047_007550_9b8266 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. FAIL: y changed while out_valid was low.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_off\benchmarks\ilyasov\tasks\ilyasov__09_constraint_aware_timing__task_90\samples\run_20260426_175047_007550_9b8266__sample_8
generated.v preview 
module dual_mac_timing (
    input        clk,
    input        rst_n,
    input        in_valid,
    input signed [15:0] a,
    input signed [15:0] b,
    input signed [15:0] c,
    input signed [15:0] d,
    output       out_valid,
    output signed [32:0] y
);

    reg signed [32:0] mac_result;
    reg               output_valid_reg;
    reg               input_latch;

    always @(posedge clk or negedge rst_n) begin
        if (!rst_n) begin
            output_valid_reg <= 1'b0;
            input_latch <= 1'b0;
        end else begin
            if (in_valid) begin
                mac_result <= (a * b) + (c * d);
                input_latch <= 1'b1;
            end else begin
                input_latch <= 1'b0;
            end
        end
    end

    always @(posedge clk or negedge rst_n) begin
        if (!rst_n) begin
...
functional details 
[stdout]
FAIL: y changed while out_valid was low.
TEST_FAILED
/workspace/banchmarks/pashencev/09_constraint_aware_timing/task_90/tb.v:120: $finish called at 136000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. FAIL: y changed while out_valid was low.",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_9 run_20260426_175047_007550_9b8266 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. FAIL: y changed while out_valid was low.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_off\benchmarks\ilyasov\tasks\ilyasov__09_constraint_aware_timing__task_90\samples\run_20260426_175047_007550_9b8266__sample_9
generated.v preview 
module dual_mac_timing (
    input        clk,
    input        rst_n,
    input        in_valid,
    input signed [15:0] a,
    input signed [15:0] b,
    input signed [15:0] c,
    input signed [15:0] d,
    output       out_valid,
    output signed [32:0] y
);

    reg signed [32:0] mac_result;
    reg               output_valid_reg;
    reg               input_latch;

    always @(posedge clk or negedge rst_n) begin
        if (!rst_n) begin
            output_valid_reg <= 1'b0;
            input_latch <= 1'b0;
        end else begin
            if (in_valid) begin
                mac_result <= (a * b) + (c * d);
                input_latch <= 1'b1;
            end else begin
                input_latch <= 1'b0;
            end
        end
    end

    always @(posedge clk or negedge rst_n) begin
        if (!rst_n) begin
...
functional details 
[stdout]
FAIL: y changed while out_valid was low.
TEST_FAILED
/workspace/banchmarks/pashencev/09_constraint_aware_timing/task_90/tb.v:120: $finish called at 136000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. FAIL: y changed while out_valid was low.",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_10 run_20260426_175047_007550_9b8266 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. FAIL: y changed while out_valid was low.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_off\benchmarks\ilyasov\tasks\ilyasov__09_constraint_aware_timing__task_90\samples\run_20260426_175047_007550_9b8266__sample_10
generated.v preview 
module dual_mac_timing (
    input        clk,
    input        rst_n,
    input        in_valid,
    input signed [15:0] a,
    input signed [15:0] b,
    input signed [15:0] c,
    input signed [15:0] d,
    output       out_valid,
    output signed [32:0] y
);

    reg signed [32:0] mac_result;
    reg               output_valid_reg;
    reg               input_latch;

    always @(posedge clk or negedge rst_n) begin
        if (!rst_n) begin
            output_valid_reg <= 1'b0;
            input_latch <= 1'b0;
        end else begin
            if (in_valid) begin
                mac_result <= (a * b) + (c * d);
                input_latch <= 1'b1;
            end else begin
                input_latch <= 1'b0;
            end
        end
    end

    always @(posedge clk or negedge rst_n) begin
        if (!rst_n) begin
...
functional details 
[stdout]
FAIL: y changed while out_valid was low.
TEST_FAILED
/workspace/banchmarks/pashencev/09_constraint_aware_timing/task_90/tb.v:120: $finish called at 136000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. FAIL: y changed while out_valid was low.",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}