Назад к моделям Назад к профилю модели

qwen3-coder:30b | RAG on

03_low_power_design / task_34 | soc_top

benchmarkilyasov
task_idilyasov/03_low_power_design/task_34
samples_total33
final_success_samples3
final_success_rate_samples9.1%
functional_pass_rate_samples9.1%
synth_pass_rate_samples9.1%
source_runsrun_20260424_144121_405769_1acdc5, run_20260424_172135_562392_bd9fc2, run_20260424_230145_632624_082334, run_20260426_141859_833435_7c9834

Что показывает эта страница

Здесь перечислены все реальные попытки этой модели на одной задаче. По каждой попытке можно увидеть, до какой стадии она дошла, где именно сломалась и какое сообщение об ошибке вернулось из syntax, functional или synthesis.

Samples

sample run extract_ok syntax_ok functional_ok openlane_ok final_success failure_stage failure_reason details
sample_1 run_20260424_144121_405769_1acdc5 ok ok ok ok ok success Full pipeline success
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__03_low_power_design__task_34\samples\run_20260424_144121_405769_1acdc5__sample_1
generated.v preview 
module soc_top (
    input clk,
    input rst_n,
    input sleep_req,
    input [31:0] data_in,
    output [31:0] data_out,
    output pwr_enable,
    output iso_en
);

    wire pd_dsp_clk;
    wire pd_dsp_rst_n;
    wire pd_dsp_sleep_req;
    wire pd_dsp_data_in;
    wire pd_dsp_data_out;

    // Instantiate submodules
    aon_ctrl aon_ctrl_inst (
        .clk(clk),
        .rst_n(rst_n),
        .sleep_req(sleep_req),
        .pwr_enable(pwr_enable),
        .iso_en(iso_en)
    );

    pd_dsp pd_dsp_inst (
        .clk(pd_dsp_clk),
        .rst_n(pd_dsp_rst_n),
        .data_in(pd_dsp_data_in),
        .data_out(pd_dsp_data_out)
    );
...
synthesis details 
[error]
None
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": true,
  "openlane_ok": true,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": true,
  "success": true
}
sample_1 run_20260424_172135_562392_bd9fc2 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__03_low_power_design__task_34\samples\run_20260424_172135_562392_bd9fc2__sample_1
generated.v preview 
module soc_top (
    input clk,
    input rst_n,
    input sleep_req,
    input [31:0] data_in,
    output [31:0] data_out,
    output pwr_enable,
    output iso_en
);

    wire pd_dsp_clk;
    wire pd_dsp_rst_n;
    wire pd_dsp_sleep_req;
    wire pd_dsp_data_in;
    wire pd_dsp_data_out;

    // Instantiate submodules
    aon_ctrl aon_ctrl_inst (
        .clk(clk),
        .rst_n(rst_n),
        .sleep_req(sleep_req),
        .pwr_enable(pwr_enable),
        .iso_en(iso_en)
    );

    pd_dsp pd_dsp_inst (
        .clk(pd_dsp_clk),
        .rst_n(pd_dsp_rst_n),
        .data_in(pd_dsp_data_in),
        .data_out(pd_dsp_data_out)
    );
...
functional details 
[stdout]
ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
ERROR: Power Down failed. Expected pwr_enable=0, iso_en=1.
ERROR: UPF Wake-Up Sequence Flaw! Isolation dropped prematurely.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
TEST_FAILED
/workspace/banchmarks/03_low_power_design/task_34/tb.v:95: $finish called at 86000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_1 run_20260424_230145_632624_082334 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__03_low_power_design__task_34\samples\run_20260424_230145_632624_082334__sample_1
generated.v preview 
module soc_top (
    input clk,
    input rst_n,
    input sleep_req,
    input [31:0] data_in,
    output [31:0] data_out,
    output pwr_enable,
    output iso_en
);

    wire pd_dsp_clk;
    wire pd_dsp_rst_n;
    wire pd_dsp_sleep_req;
    wire pd_dsp_data_in;
    wire pd_dsp_data_out;

    // Instantiate submodules
    aon_ctrl aon_ctrl_inst (
        .clk(clk),
        .rst_n(rst_n),
        .sleep_req(sleep_req),
        .pwr_enable(pwr_enable),
        .iso_en(iso_en)
    );

    pd_dsp pd_dsp_inst (
        .clk(pd_dsp_clk),
        .rst_n(pd_dsp_rst_n),
        .data_in(pd_dsp_data_in),
        .data_out(pd_dsp_data_out)
    );
...
functional details 
[stdout]
ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
ERROR: Power Down failed. Expected pwr_enable=0, iso_en=1.
ERROR: UPF Wake-Up Sequence Flaw! Isolation dropped prematurely.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
TEST_FAILED
/workspace/banchmarks/pashencev/03_low_power_design/task_34/tb.v:95: $finish called at 86000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_1 run_20260426_141859_833435_7c9834 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__03_low_power_design__task_34\samples\run_20260426_141859_833435_7c9834__sample_1
generated.v preview 
module soc_top (
    input clk,
    input rst_n,
    input sleep_req,
    input [31:0] data_in,
    output [31:0] data_out,
    output pwr_enable,
    output iso_en
);

    wire pd_dsp_clk;
    wire pd_dsp_rst_n;
    wire pd_dsp_sleep_req;
    wire pd_dsp_data_in;
    wire pd_dsp_data_out;

    // Instantiate submodules
    aon_ctrl aon_ctrl_inst (
        .clk(clk),
        .rst_n(rst_n),
        .sleep_req(sleep_req),
        .pwr_enable(pwr_enable),
        .iso_en(iso_en)
    );

    pd_dsp pd_dsp_inst (
        .clk(pd_dsp_clk),
        .rst_n(pd_dsp_rst_n),
        .data_in(pd_dsp_data_in),
        .data_out(pd_dsp_data_out)
    );
...
functional details 
[stdout]
ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
ERROR: Power Down failed. Expected pwr_enable=0, iso_en=1.
ERROR: UPF Wake-Up Sequence Flaw! Isolation dropped prematurely.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
TEST_FAILED
/workspace/banchmarks/pashencev/03_low_power_design/task_34/tb.v:95: $finish called at 86000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_2 run_20260424_144121_405769_1acdc5 ok ok ok ok ok success Full pipeline success
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__03_low_power_design__task_34\samples\run_20260424_144121_405769_1acdc5__sample_2
generated.v preview 
module soc_top (
    input clk,
    input rst_n,
    input sleep_req,
    input [31:0] data_in,
    output [31:0] data_out,
    output pwr_enable,
    output iso_en
);

    wire pd_dsp_clk;
    wire pd_dsp_rst_n;
    wire pd_dsp_sleep_req;
    wire pd_dsp_data_in;
    wire pd_dsp_data_out;

    // Instantiate submodules
    aon_ctrl aon_ctrl_inst (
        .clk(clk),
        .rst_n(rst_n),
        .sleep_req(sleep_req),
        .pwr_enable(pwr_enable),
        .iso_en(iso_en)
    );

    pd_dsp pd_dsp_inst (
        .clk(pd_dsp_clk),
        .rst_n(pd_dsp_rst_n),
        .data_in(pd_dsp_data_in),
        .data_out(pd_dsp_data_out)
    );
...
synthesis details 
[error]
None
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": true,
  "openlane_ok": true,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": true,
  "success": true
}
sample_2 run_20260424_172135_562392_bd9fc2 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__03_low_power_design__task_34\samples\run_20260424_172135_562392_bd9fc2__sample_2
generated.v preview 
module soc_top (
    input clk,
    input rst_n,
    input sleep_req,
    input [31:0] data_in,
    output [31:0] data_out,
    output pwr_enable,
    output iso_en
);

    wire pd_dsp_clk;
    wire pd_dsp_rst_n;
    wire pd_dsp_sleep_req;
    wire pd_dsp_data_in;
    wire pd_dsp_data_out;

    // Instantiate submodules
    aon_ctrl aon_ctrl_inst (
        .clk(clk),
        .rst_n(rst_n),
        .sleep_req(sleep_req),
        .pwr_enable(pwr_enable),
        .iso_en(iso_en)
    );

    pd_dsp pd_dsp_inst (
        .clk(pd_dsp_clk),
        .rst_n(pd_dsp_rst_n),
        .data_in(pd_dsp_data_in),
        .data_out(pd_dsp_data_out)
    );
...
functional details 
[stdout]
ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
ERROR: Power Down failed. Expected pwr_enable=0, iso_en=1.
ERROR: UPF Wake-Up Sequence Flaw! Isolation dropped prematurely.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
TEST_FAILED
/workspace/banchmarks/03_low_power_design/task_34/tb.v:95: $finish called at 86000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_2 run_20260424_230145_632624_082334 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__03_low_power_design__task_34\samples\run_20260424_230145_632624_082334__sample_2
generated.v preview 
module soc_top (
    input clk,
    input rst_n,
    input sleep_req,
    input [31:0] data_in,
    output [31:0] data_out,
    output pwr_enable,
    output iso_en
);

    wire pd_dsp_clk;
    wire pd_dsp_rst_n;
    wire pd_dsp_sleep_req;
    wire pd_dsp_data_in;
    wire pd_dsp_data_out;

    // Instantiate submodules
    aon_ctrl aon_ctrl_inst (
        .clk(clk),
        .rst_n(rst_n),
        .sleep_req(sleep_req),
        .pwr_enable(pwr_enable),
        .iso_en(iso_en)
    );

    pd_dsp pd_dsp_inst (
        .clk(pd_dsp_clk),
        .rst_n(pd_dsp_rst_n),
        .data_in(pd_dsp_data_in),
        .data_out(pd_dsp_data_out)
    );
...
functional details 
[stdout]
ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
ERROR: Power Down failed. Expected pwr_enable=0, iso_en=1.
ERROR: UPF Wake-Up Sequence Flaw! Isolation dropped prematurely.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
TEST_FAILED
/workspace/banchmarks/pashencev/03_low_power_design/task_34/tb.v:95: $finish called at 86000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_2 run_20260426_141859_833435_7c9834 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__03_low_power_design__task_34\samples\run_20260426_141859_833435_7c9834__sample_2
generated.v preview 
module soc_top (
    input clk,
    input rst_n,
    input sleep_req,
    input [31:0] data_in,
    output [31:0] data_out,
    output pwr_enable,
    output iso_en
);

    wire pd_dsp_clk;
    wire pd_dsp_rst_n;
    wire pd_dsp_sleep_req;
    wire pd_dsp_data_in;
    wire pd_dsp_data_out;

    // Instantiate submodules
    aon_ctrl aon_ctrl_inst (
        .clk(clk),
        .rst_n(rst_n),
        .sleep_req(sleep_req),
        .pwr_enable(pwr_enable),
        .iso_en(iso_en)
    );

    pd_dsp pd_dsp_inst (
        .clk(pd_dsp_clk),
        .rst_n(pd_dsp_rst_n),
        .data_in(pd_dsp_data_in),
        .data_out(pd_dsp_data_out)
    );
...
functional details 
[stdout]
ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
ERROR: Power Down failed. Expected pwr_enable=0, iso_en=1.
ERROR: UPF Wake-Up Sequence Flaw! Isolation dropped prematurely.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
TEST_FAILED
/workspace/banchmarks/pashencev/03_low_power_design/task_34/tb.v:95: $finish called at 86000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_3 run_20260424_144121_405769_1acdc5 ok ok ok ok ok success Full pipeline success
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__03_low_power_design__task_34\samples\run_20260424_144121_405769_1acdc5__sample_3
generated.v preview 
module soc_top (
    input clk,
    input rst_n,
    input sleep_req,
    input [31:0] data_in,
    output [31:0] data_out,
    output pwr_enable,
    output iso_en
);

    wire pd_dsp_clk;
    wire pd_dsp_rst_n;
    wire pd_dsp_sleep_req;
    wire pd_dsp_data_in;
    wire pd_dsp_data_out;

    // Instantiate submodules
    aon_ctrl aon_ctrl_inst (
        .clk(clk),
        .rst_n(rst_n),
        .sleep_req(sleep_req),
        .pwr_enable(pwr_enable),
        .iso_en(iso_en)
    );

    pd_dsp pd_dsp_inst (
        .clk(pd_dsp_clk),
        .rst_n(pd_dsp_rst_n),
        .data_in(pd_dsp_data_in),
        .data_out(pd_dsp_data_out)
    );
...
synthesis details 
[error]
None
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": true,
  "openlane_ok": true,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": true,
  "success": true
}
sample_3 run_20260424_172135_562392_bd9fc2 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__03_low_power_design__task_34\samples\run_20260424_172135_562392_bd9fc2__sample_3
generated.v preview 
module soc_top (
    input clk,
    input rst_n,
    input sleep_req,
    input [31:0] data_in,
    output [31:0] data_out,
    output pwr_enable,
    output iso_en
);

    wire pd_dsp_clk;
    wire pd_dsp_rst_n;
    wire pd_dsp_sleep_req;
    wire pd_dsp_data_in;
    wire pd_dsp_data_out;

    // Instantiate submodules
    aon_ctrl aon_ctrl_inst (
        .clk(clk),
        .rst_n(rst_n),
        .sleep_req(sleep_req),
        .pwr_enable(pwr_enable),
        .iso_en(iso_en)
    );

    pd_dsp pd_dsp_inst (
        .clk(pd_dsp_clk),
        .rst_n(pd_dsp_rst_n),
        .data_in(pd_dsp_data_in),
        .data_out(pd_dsp_data_out)
    );
...
functional details 
[stdout]
ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
ERROR: Power Down failed. Expected pwr_enable=0, iso_en=1.
ERROR: UPF Wake-Up Sequence Flaw! Isolation dropped prematurely.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
TEST_FAILED
/workspace/banchmarks/03_low_power_design/task_34/tb.v:95: $finish called at 86000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_3 run_20260424_230145_632624_082334 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__03_low_power_design__task_34\samples\run_20260424_230145_632624_082334__sample_3
generated.v preview 
module soc_top (
    input clk,
    input rst_n,
    input sleep_req,
    input [31:0] data_in,
    output [31:0] data_out,
    output pwr_enable,
    output iso_en
);

    wire pd_dsp_clk;
    wire pd_dsp_rst_n;
    wire pd_dsp_sleep_req;
    wire pd_dsp_data_in;
    wire pd_dsp_data_out;

    // Instantiate submodules
    aon_ctrl aon_ctrl_inst (
        .clk(clk),
        .rst_n(rst_n),
        .sleep_req(sleep_req),
        .pwr_enable(pwr_enable),
        .iso_en(iso_en)
    );

    pd_dsp pd_dsp_inst (
        .clk(pd_dsp_clk),
        .rst_n(pd_dsp_rst_n),
        .data_in(pd_dsp_data_in),
        .data_out(pd_dsp_data_out)
    );
...
functional details 
[stdout]
ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
ERROR: Power Down failed. Expected pwr_enable=0, iso_en=1.
ERROR: UPF Wake-Up Sequence Flaw! Isolation dropped prematurely.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
TEST_FAILED
/workspace/banchmarks/pashencev/03_low_power_design/task_34/tb.v:95: $finish called at 86000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_3 run_20260426_141859_833435_7c9834 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__03_low_power_design__task_34\samples\run_20260426_141859_833435_7c9834__sample_3
generated.v preview 
module soc_top (
    input clk,
    input rst_n,
    input sleep_req,
    input [31:0] data_in,
    output [31:0] data_out,
    output pwr_enable,
    output iso_en
);

    wire pd_dsp_clk;
    wire pd_dsp_rst_n;
    wire pd_dsp_sleep_req;
    wire pd_dsp_data_in;
    wire pd_dsp_data_out;

    // Instantiate submodules
    aon_ctrl aon_ctrl_inst (
        .clk(clk),
        .rst_n(rst_n),
        .sleep_req(sleep_req),
        .pwr_enable(pwr_enable),
        .iso_en(iso_en)
    );

    pd_dsp pd_dsp_inst (
        .clk(pd_dsp_clk),
        .rst_n(pd_dsp_rst_n),
        .data_in(pd_dsp_data_in),
        .data_out(pd_dsp_data_out)
    );
...
functional details 
[stdout]
ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
ERROR: Power Down failed. Expected pwr_enable=0, iso_en=1.
ERROR: UPF Wake-Up Sequence Flaw! Isolation dropped prematurely.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
TEST_FAILED
/workspace/banchmarks/pashencev/03_low_power_design/task_34/tb.v:95: $finish called at 86000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_4 run_20260424_172135_562392_bd9fc2 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__03_low_power_design__task_34\samples\run_20260424_172135_562392_bd9fc2__sample_4
generated.v preview 
module soc_top (
    input clk,
    input rst_n,
    input sleep_req,
    input [31:0] data_in,
    output [31:0] data_out,
    output pwr_enable,
    output iso_en
);

    wire pd_dsp_clk;
    wire pd_dsp_rst_n;
    wire pd_dsp_sleep_req;
    wire pd_dsp_data_in;
    wire pd_dsp_data_out;

    // Instantiate submodules
    aon_ctrl aon_ctrl_inst (
        .clk(clk),
        .rst_n(rst_n),
        .sleep_req(sleep_req),
        .pwr_enable(pwr_enable),
        .iso_en(iso_en)
    );

    pd_dsp pd_dsp_inst (
        .clk(pd_dsp_clk),
        .rst_n(pd_dsp_rst_n),
        .data_in(pd_dsp_data_in),
        .data_out(pd_dsp_data_out)
    );
...
functional details 
[stdout]
ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
ERROR: Power Down failed. Expected pwr_enable=0, iso_en=1.
ERROR: UPF Wake-Up Sequence Flaw! Isolation dropped prematurely.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
TEST_FAILED
/workspace/banchmarks/03_low_power_design/task_34/tb.v:95: $finish called at 86000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_4 run_20260424_230145_632624_082334 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__03_low_power_design__task_34\samples\run_20260424_230145_632624_082334__sample_4
generated.v preview 
module soc_top (
    input clk,
    input rst_n,
    input sleep_req,
    input [31:0] data_in,
    output [31:0] data_out,
    output pwr_enable,
    output iso_en
);

    wire pd_dsp_clk;
    wire pd_dsp_rst_n;
    wire pd_dsp_sleep_req;
    wire pd_dsp_data_in;
    wire pd_dsp_data_out;

    // Instantiate submodules
    aon_ctrl aon_ctrl_inst (
        .clk(clk),
        .rst_n(rst_n),
        .sleep_req(sleep_req),
        .pwr_enable(pwr_enable),
        .iso_en(iso_en)
    );

    pd_dsp pd_dsp_inst (
        .clk(pd_dsp_clk),
        .rst_n(pd_dsp_rst_n),
        .data_in(pd_dsp_data_in),
        .data_out(pd_dsp_data_out)
    );
...
functional details 
[stdout]
ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
ERROR: Power Down failed. Expected pwr_enable=0, iso_en=1.
ERROR: UPF Wake-Up Sequence Flaw! Isolation dropped prematurely.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
TEST_FAILED
/workspace/banchmarks/pashencev/03_low_power_design/task_34/tb.v:95: $finish called at 86000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_4 run_20260426_141859_833435_7c9834 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__03_low_power_design__task_34\samples\run_20260426_141859_833435_7c9834__sample_4
generated.v preview 
module soc_top (
    input clk,
    input rst_n,
    input sleep_req,
    input [31:0] data_in,
    output [31:0] data_out,
    output pwr_enable,
    output iso_en
);

    wire pd_dsp_clk;
    wire pd_dsp_rst_n;
    wire pd_dsp_sleep_req;
    wire pd_dsp_data_in;
    wire pd_dsp_data_out;

    // Instantiate submodules
    aon_ctrl aon_ctrl_inst (
        .clk(clk),
        .rst_n(rst_n),
        .sleep_req(sleep_req),
        .pwr_enable(pwr_enable),
        .iso_en(iso_en)
    );

    pd_dsp pd_dsp_inst (
        .clk(pd_dsp_clk),
        .rst_n(pd_dsp_rst_n),
        .data_in(pd_dsp_data_in),
        .data_out(pd_dsp_data_out)
    );
...
functional details 
[stdout]
ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
ERROR: Power Down failed. Expected pwr_enable=0, iso_en=1.
ERROR: UPF Wake-Up Sequence Flaw! Isolation dropped prematurely.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
TEST_FAILED
/workspace/banchmarks/pashencev/03_low_power_design/task_34/tb.v:95: $finish called at 86000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_5 run_20260424_172135_562392_bd9fc2 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__03_low_power_design__task_34\samples\run_20260424_172135_562392_bd9fc2__sample_5
generated.v preview 
module soc_top (
    input clk,
    input rst_n,
    input sleep_req,
    input [31:0] data_in,
    output [31:0] data_out,
    output pwr_enable,
    output iso_en
);

    wire pd_dsp_clk;
    wire pd_dsp_rst_n;
    wire pd_dsp_sleep_req;
    wire pd_dsp_data_in;
    wire pd_dsp_data_out;

    // Instantiate submodules
    aon_ctrl aon_ctrl_inst (
        .clk(clk),
        .rst_n(rst_n),
        .sleep_req(sleep_req),
        .pwr_enable(pwr_enable),
        .iso_en(iso_en)
    );

    pd_dsp pd_dsp_inst (
        .clk(pd_dsp_clk),
        .rst_n(pd_dsp_rst_n),
        .data_in(pd_dsp_data_in),
        .data_out(pd_dsp_data_out)
    );
...
functional details 
[stdout]
ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
ERROR: Power Down failed. Expected pwr_enable=0, iso_en=1.
ERROR: UPF Wake-Up Sequence Flaw! Isolation dropped prematurely.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
TEST_FAILED
/workspace/banchmarks/03_low_power_design/task_34/tb.v:95: $finish called at 86000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_5 run_20260424_230145_632624_082334 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__03_low_power_design__task_34\samples\run_20260424_230145_632624_082334__sample_5
generated.v preview 
module soc_top (
    input clk,
    input rst_n,
    input sleep_req,
    input [31:0] data_in,
    output [31:0] data_out,
    output pwr_enable,
    output iso_en
);

    wire pd_dsp_clk;
    wire pd_dsp_rst_n;
    wire pd_dsp_sleep_req;
    wire pd_dsp_data_in;
    wire pd_dsp_data_out;

    // Instantiate submodules
    aon_ctrl aon_ctrl_inst (
        .clk(clk),
        .rst_n(rst_n),
        .sleep_req(sleep_req),
        .pwr_enable(pwr_enable),
        .iso_en(iso_en)
    );

    pd_dsp pd_dsp_inst (
        .clk(pd_dsp_clk),
        .rst_n(pd_dsp_rst_n),
        .data_in(pd_dsp_data_in),
        .data_out(pd_dsp_data_out)
    );
...
functional details 
[stdout]
ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
ERROR: Power Down failed. Expected pwr_enable=0, iso_en=1.
ERROR: UPF Wake-Up Sequence Flaw! Isolation dropped prematurely.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
TEST_FAILED
/workspace/banchmarks/pashencev/03_low_power_design/task_34/tb.v:95: $finish called at 86000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_5 run_20260426_141859_833435_7c9834 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__03_low_power_design__task_34\samples\run_20260426_141859_833435_7c9834__sample_5
generated.v preview 
module soc_top (
    input clk,
    input rst_n,
    input sleep_req,
    input [31:0] data_in,
    output [31:0] data_out,
    output pwr_enable,
    output iso_en
);

    wire pd_dsp_clk;
    wire pd_dsp_rst_n;
    wire pd_dsp_sleep_req;
    wire pd_dsp_data_in;
    wire pd_dsp_data_out;

    // Instantiate submodules
    aon_ctrl aon_ctrl_inst (
        .clk(clk),
        .rst_n(rst_n),
        .sleep_req(sleep_req),
        .pwr_enable(pwr_enable),
        .iso_en(iso_en)
    );

    pd_dsp pd_dsp_inst (
        .clk(pd_dsp_clk),
        .rst_n(pd_dsp_rst_n),
        .data_in(pd_dsp_data_in),
        .data_out(pd_dsp_data_out)
    );
...
functional details 
[stdout]
ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
ERROR: Power Down failed. Expected pwr_enable=0, iso_en=1.
ERROR: UPF Wake-Up Sequence Flaw! Isolation dropped prematurely.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
TEST_FAILED
/workspace/banchmarks/pashencev/03_low_power_design/task_34/tb.v:95: $finish called at 86000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_6 run_20260424_172135_562392_bd9fc2 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__03_low_power_design__task_34\samples\run_20260424_172135_562392_bd9fc2__sample_6
generated.v preview 
module soc_top (
    input clk,
    input rst_n,
    input sleep_req,
    input [31:0] data_in,
    output [31:0] data_out,
    output pwr_enable,
    output iso_en
);

    wire pd_dsp_clk;
    wire pd_dsp_rst_n;
    wire pd_dsp_sleep_req;
    wire pd_dsp_data_in;
    wire pd_dsp_data_out;

    // Instantiate submodules
    aon_ctrl aon_ctrl_inst (
        .clk(clk),
        .rst_n(rst_n),
        .sleep_req(sleep_req),
        .pwr_enable(pwr_enable),
        .iso_en(iso_en)
    );

    pd_dsp pd_dsp_inst (
        .clk(pd_dsp_clk),
        .rst_n(pd_dsp_rst_n),
        .data_in(pd_dsp_data_in),
        .data_out(pd_dsp_data_out)
    );
...
functional details 
[stdout]
ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
ERROR: Power Down failed. Expected pwr_enable=0, iso_en=1.
ERROR: UPF Wake-Up Sequence Flaw! Isolation dropped prematurely.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
TEST_FAILED
/workspace/banchmarks/03_low_power_design/task_34/tb.v:95: $finish called at 86000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_6 run_20260424_230145_632624_082334 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__03_low_power_design__task_34\samples\run_20260424_230145_632624_082334__sample_6
generated.v preview 
module soc_top (
    input clk,
    input rst_n,
    input sleep_req,
    input [31:0] data_in,
    output [31:0] data_out,
    output pwr_enable,
    output iso_en
);

    wire pd_dsp_clk;
    wire pd_dsp_rst_n;
    wire pd_dsp_sleep_req;
    wire pd_dsp_data_in;
    wire pd_dsp_data_out;

    // Instantiate submodules
    aon_ctrl aon_ctrl_inst (
        .clk(clk),
        .rst_n(rst_n),
        .sleep_req(sleep_req),
        .pwr_enable(pwr_enable),
        .iso_en(iso_en)
    );

    pd_dsp pd_dsp_inst (
        .clk(pd_dsp_clk),
        .rst_n(pd_dsp_rst_n),
        .data_in(pd_dsp_data_in),
        .data_out(pd_dsp_data_out)
    );
...
functional details 
[stdout]
ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
ERROR: Power Down failed. Expected pwr_enable=0, iso_en=1.
ERROR: UPF Wake-Up Sequence Flaw! Isolation dropped prematurely.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
TEST_FAILED
/workspace/banchmarks/pashencev/03_low_power_design/task_34/tb.v:95: $finish called at 86000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_6 run_20260426_141859_833435_7c9834 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__03_low_power_design__task_34\samples\run_20260426_141859_833435_7c9834__sample_6
generated.v preview 
module soc_top (
    input clk,
    input rst_n,
    input sleep_req,
    input [31:0] data_in,
    output [31:0] data_out,
    output pwr_enable,
    output iso_en
);

    wire pd_dsp_clk;
    wire pd_dsp_rst_n;
    wire pd_dsp_sleep_req;
    wire pd_dsp_data_in;
    wire pd_dsp_data_out;

    // Instantiate submodules
    aon_ctrl aon_ctrl_inst (
        .clk(clk),
        .rst_n(rst_n),
        .sleep_req(sleep_req),
        .pwr_enable(pwr_enable),
        .iso_en(iso_en)
    );

    pd_dsp pd_dsp_inst (
        .clk(pd_dsp_clk),
        .rst_n(pd_dsp_rst_n),
        .data_in(pd_dsp_data_in),
        .data_out(pd_dsp_data_out)
    );
...
functional details 
[stdout]
ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
ERROR: Power Down failed. Expected pwr_enable=0, iso_en=1.
ERROR: UPF Wake-Up Sequence Flaw! Isolation dropped prematurely.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
TEST_FAILED
/workspace/banchmarks/pashencev/03_low_power_design/task_34/tb.v:95: $finish called at 86000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_7 run_20260424_172135_562392_bd9fc2 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__03_low_power_design__task_34\samples\run_20260424_172135_562392_bd9fc2__sample_7
generated.v preview 
module soc_top (
    input clk,
    input rst_n,
    input sleep_req,
    input [31:0] data_in,
    output [31:0] data_out,
    output pwr_enable,
    output iso_en
);

    wire pd_dsp_clk;
    wire pd_dsp_rst_n;
    wire pd_dsp_sleep_req;
    wire pd_dsp_data_in;
    wire pd_dsp_data_out;

    // Instantiate submodules
    aon_ctrl aon_ctrl_inst (
        .clk(clk),
        .rst_n(rst_n),
        .sleep_req(sleep_req),
        .pwr_enable(pwr_enable),
        .iso_en(iso_en)
    );

    pd_dsp pd_dsp_inst (
        .clk(pd_dsp_clk),
        .rst_n(pd_dsp_rst_n),
        .data_in(pd_dsp_data_in),
        .data_out(pd_dsp_data_out)
    );
...
functional details 
[stdout]
ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
ERROR: Power Down failed. Expected pwr_enable=0, iso_en=1.
ERROR: UPF Wake-Up Sequence Flaw! Isolation dropped prematurely.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
TEST_FAILED
/workspace/banchmarks/03_low_power_design/task_34/tb.v:95: $finish called at 86000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_7 run_20260424_230145_632624_082334 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__03_low_power_design__task_34\samples\run_20260424_230145_632624_082334__sample_7
generated.v preview 
module soc_top (
    input clk,
    input rst_n,
    input sleep_req,
    input [31:0] data_in,
    output [31:0] data_out,
    output pwr_enable,
    output iso_en
);

    wire pd_dsp_clk;
    wire pd_dsp_rst_n;
    wire pd_dsp_sleep_req;
    wire pd_dsp_data_in;
    wire pd_dsp_data_out;

    // Instantiate submodules
    aon_ctrl aon_ctrl_inst (
        .clk(clk),
        .rst_n(rst_n),
        .sleep_req(sleep_req),
        .pwr_enable(pwr_enable),
        .iso_en(iso_en)
    );

    pd_dsp pd_dsp_inst (
        .clk(pd_dsp_clk),
        .rst_n(pd_dsp_rst_n),
        .data_in(pd_dsp_data_in),
        .data_out(pd_dsp_data_out)
    );
...
functional details 
[stdout]
ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
ERROR: Power Down failed. Expected pwr_enable=0, iso_en=1.
ERROR: UPF Wake-Up Sequence Flaw! Isolation dropped prematurely.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
TEST_FAILED
/workspace/banchmarks/pashencev/03_low_power_design/task_34/tb.v:95: $finish called at 86000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_7 run_20260426_141859_833435_7c9834 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__03_low_power_design__task_34\samples\run_20260426_141859_833435_7c9834__sample_7
generated.v preview 
module soc_top (
    input clk,
    input rst_n,
    input sleep_req,
    input [31:0] data_in,
    output [31:0] data_out,
    output pwr_enable,
    output iso_en
);

    wire pd_dsp_clk;
    wire pd_dsp_rst_n;
    wire pd_dsp_sleep_req;
    wire pd_dsp_data_in;
    wire pd_dsp_data_out;

    // Instantiate submodules
    aon_ctrl aon_ctrl_inst (
        .clk(clk),
        .rst_n(rst_n),
        .sleep_req(sleep_req),
        .pwr_enable(pwr_enable),
        .iso_en(iso_en)
    );

    pd_dsp pd_dsp_inst (
        .clk(pd_dsp_clk),
        .rst_n(pd_dsp_rst_n),
        .data_in(pd_dsp_data_in),
        .data_out(pd_dsp_data_out)
    );
...
functional details 
[stdout]
ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
ERROR: Power Down failed. Expected pwr_enable=0, iso_en=1.
ERROR: UPF Wake-Up Sequence Flaw! Isolation dropped prematurely.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
TEST_FAILED
/workspace/banchmarks/pashencev/03_low_power_design/task_34/tb.v:95: $finish called at 86000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_8 run_20260424_172135_562392_bd9fc2 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__03_low_power_design__task_34\samples\run_20260424_172135_562392_bd9fc2__sample_8
generated.v preview 
module soc_top (
    input clk,
    input rst_n,
    input sleep_req,
    input [31:0] data_in,
    output [31:0] data_out,
    output pwr_enable,
    output iso_en
);

    wire pd_dsp_clk;
    wire pd_dsp_rst_n;
    wire pd_dsp_sleep_req;
    wire pd_dsp_data_in;
    wire pd_dsp_data_out;

    // Instantiate submodules
    aon_ctrl aon_ctrl_inst (
        .clk(clk),
        .rst_n(rst_n),
        .sleep_req(sleep_req),
        .pwr_enable(pwr_enable),
        .iso_en(iso_en)
    );

    pd_dsp pd_dsp_inst (
        .clk(pd_dsp_clk),
        .rst_n(pd_dsp_rst_n),
        .data_in(pd_dsp_data_in),
        .data_out(pd_dsp_data_out)
    );
...
functional details 
[stdout]
ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
ERROR: Power Down failed. Expected pwr_enable=0, iso_en=1.
ERROR: UPF Wake-Up Sequence Flaw! Isolation dropped prematurely.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
TEST_FAILED
/workspace/banchmarks/03_low_power_design/task_34/tb.v:95: $finish called at 86000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_8 run_20260424_230145_632624_082334 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__03_low_power_design__task_34\samples\run_20260424_230145_632624_082334__sample_8
generated.v preview 
module soc_top (
    input clk,
    input rst_n,
    input sleep_req,
    input [31:0] data_in,
    output [31:0] data_out,
    output pwr_enable,
    output iso_en
);

    wire pd_dsp_clk;
    wire pd_dsp_rst_n;
    wire pd_dsp_sleep_req;
    wire pd_dsp_data_in;
    wire pd_dsp_data_out;

    // Instantiate submodules
    aon_ctrl aon_ctrl_inst (
        .clk(clk),
        .rst_n(rst_n),
        .sleep_req(sleep_req),
        .pwr_enable(pwr_enable),
        .iso_en(iso_en)
    );

    pd_dsp pd_dsp_inst (
        .clk(pd_dsp_clk),
        .rst_n(pd_dsp_rst_n),
        .data_in(pd_dsp_data_in),
        .data_out(pd_dsp_data_out)
    );
...
functional details 
[stdout]
ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
ERROR: Power Down failed. Expected pwr_enable=0, iso_en=1.
ERROR: UPF Wake-Up Sequence Flaw! Isolation dropped prematurely.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
TEST_FAILED
/workspace/banchmarks/pashencev/03_low_power_design/task_34/tb.v:95: $finish called at 86000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_8 run_20260426_141859_833435_7c9834 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__03_low_power_design__task_34\samples\run_20260426_141859_833435_7c9834__sample_8
generated.v preview 
module soc_top (
    input clk,
    input rst_n,
    input sleep_req,
    input [31:0] data_in,
    output [31:0] data_out,
    output pwr_enable,
    output iso_en
);

    wire pd_dsp_clk;
    wire pd_dsp_rst_n;
    wire pd_dsp_sleep_req;
    wire pd_dsp_data_in;
    wire pd_dsp_data_out;

    // Instantiate submodules
    aon_ctrl aon_ctrl_inst (
        .clk(clk),
        .rst_n(rst_n),
        .sleep_req(sleep_req),
        .pwr_enable(pwr_enable),
        .iso_en(iso_en)
    );

    pd_dsp pd_dsp_inst (
        .clk(pd_dsp_clk),
        .rst_n(pd_dsp_rst_n),
        .data_in(pd_dsp_data_in),
        .data_out(pd_dsp_data_out)
    );
...
functional details 
[stdout]
ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
ERROR: Power Down failed. Expected pwr_enable=0, iso_en=1.
ERROR: UPF Wake-Up Sequence Flaw! Isolation dropped prematurely.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
TEST_FAILED
/workspace/banchmarks/pashencev/03_low_power_design/task_34/tb.v:95: $finish called at 86000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_9 run_20260424_172135_562392_bd9fc2 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__03_low_power_design__task_34\samples\run_20260424_172135_562392_bd9fc2__sample_9
generated.v preview 
module soc_top (
    input clk,
    input rst_n,
    input sleep_req,
    input [31:0] data_in,
    output [31:0] data_out,
    output pwr_enable,
    output iso_en
);

    wire pd_dsp_clk;
    wire pd_dsp_rst_n;
    wire pd_dsp_sleep_req;
    wire pd_dsp_data_in;
    wire pd_dsp_data_out;

    // Instantiate submodules
    aon_ctrl aon_ctrl_inst (
        .clk(clk),
        .rst_n(rst_n),
        .sleep_req(sleep_req),
        .pwr_enable(pwr_enable),
        .iso_en(iso_en)
    );

    pd_dsp pd_dsp_inst (
        .clk(pd_dsp_clk),
        .rst_n(pd_dsp_rst_n),
        .data_in(pd_dsp_data_in),
        .data_out(pd_dsp_data_out)
    );
...
functional details 
[stdout]
ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
ERROR: Power Down failed. Expected pwr_enable=0, iso_en=1.
ERROR: UPF Wake-Up Sequence Flaw! Isolation dropped prematurely.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
TEST_FAILED
/workspace/banchmarks/03_low_power_design/task_34/tb.v:95: $finish called at 86000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_9 run_20260424_230145_632624_082334 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__03_low_power_design__task_34\samples\run_20260424_230145_632624_082334__sample_9
generated.v preview 
module soc_top (
    input clk,
    input rst_n,
    input sleep_req,
    input [31:0] data_in,
    output [31:0] data_out,
    output pwr_enable,
    output iso_en
);

    wire pd_dsp_clk;
    wire pd_dsp_rst_n;
    wire pd_dsp_sleep_req;
    wire pd_dsp_data_in;
    wire pd_dsp_data_out;

    // Instantiate submodules
    aon_ctrl aon_ctrl_inst (
        .clk(clk),
        .rst_n(rst_n),
        .sleep_req(sleep_req),
        .pwr_enable(pwr_enable),
        .iso_en(iso_en)
    );

    pd_dsp pd_dsp_inst (
        .clk(pd_dsp_clk),
        .rst_n(pd_dsp_rst_n),
        .data_in(pd_dsp_data_in),
        .data_out(pd_dsp_data_out)
    );
...
functional details 
[stdout]
ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
ERROR: Power Down failed. Expected pwr_enable=0, iso_en=1.
ERROR: UPF Wake-Up Sequence Flaw! Isolation dropped prematurely.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
TEST_FAILED
/workspace/banchmarks/pashencev/03_low_power_design/task_34/tb.v:95: $finish called at 86000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_9 run_20260426_141859_833435_7c9834 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__03_low_power_design__task_34\samples\run_20260426_141859_833435_7c9834__sample_9
generated.v preview 
module soc_top (
    input clk,
    input rst_n,
    input sleep_req,
    input [31:0] data_in,
    output [31:0] data_out,
    output pwr_enable,
    output iso_en
);

    wire pd_dsp_clk;
    wire pd_dsp_rst_n;
    wire pd_dsp_sleep_req;
    wire pd_dsp_data_in;
    wire pd_dsp_data_out;

    // Instantiate submodules
    aon_ctrl aon_ctrl_inst (
        .clk(clk),
        .rst_n(rst_n),
        .sleep_req(sleep_req),
        .pwr_enable(pwr_enable),
        .iso_en(iso_en)
    );

    pd_dsp pd_dsp_inst (
        .clk(pd_dsp_clk),
        .rst_n(pd_dsp_rst_n),
        .data_in(pd_dsp_data_in),
        .data_out(pd_dsp_data_out)
    );
...
functional details 
[stdout]
ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
ERROR: Power Down failed. Expected pwr_enable=0, iso_en=1.
ERROR: UPF Wake-Up Sequence Flaw! Isolation dropped prematurely.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
TEST_FAILED
/workspace/banchmarks/pashencev/03_low_power_design/task_34/tb.v:95: $finish called at 86000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_10 run_20260424_172135_562392_bd9fc2 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__03_low_power_design__task_34\samples\run_20260424_172135_562392_bd9fc2__sample_10
generated.v preview 
module soc_top (
    input clk,
    input rst_n,
    input sleep_req,
    input [31:0] data_in,
    output [31:0] data_out,
    output pwr_enable,
    output iso_en
);

    wire pd_dsp_clk;
    wire pd_dsp_rst_n;
    wire pd_dsp_sleep_req;
    wire pd_dsp_data_in;
    wire pd_dsp_data_out;

    // Instantiate submodules
    aon_ctrl aon_ctrl_inst (
        .clk(clk),
        .rst_n(rst_n),
        .sleep_req(sleep_req),
        .pwr_enable(pwr_enable),
        .iso_en(iso_en)
    );

    pd_dsp pd_dsp_inst (
        .clk(pd_dsp_clk),
        .rst_n(pd_dsp_rst_n),
        .data_in(pd_dsp_data_in),
        .data_out(pd_dsp_data_out)
    );
...
functional details 
[stdout]
ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
ERROR: Power Down failed. Expected pwr_enable=0, iso_en=1.
ERROR: UPF Wake-Up Sequence Flaw! Isolation dropped prematurely.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
TEST_FAILED
/workspace/banchmarks/03_low_power_design/task_34/tb.v:95: $finish called at 86000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_10 run_20260424_230145_632624_082334 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__03_low_power_design__task_34\samples\run_20260424_230145_632624_082334__sample_10
generated.v preview 
module soc_top (
    input clk,
    input rst_n,
    input sleep_req,
    input [31:0] data_in,
    output [31:0] data_out,
    output pwr_enable,
    output iso_en
);

    wire pd_dsp_clk;
    wire pd_dsp_rst_n;
    wire pd_dsp_sleep_req;
    wire pd_dsp_data_in;
    wire pd_dsp_data_out;

    // Instantiate submodules
    aon_ctrl aon_ctrl_inst (
        .clk(clk),
        .rst_n(rst_n),
        .sleep_req(sleep_req),
        .pwr_enable(pwr_enable),
        .iso_en(iso_en)
    );

    pd_dsp pd_dsp_inst (
        .clk(pd_dsp_clk),
        .rst_n(pd_dsp_rst_n),
        .data_in(pd_dsp_data_in),
        .data_out(pd_dsp_data_out)
    );
...
functional details 
[stdout]
ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
ERROR: Power Down failed. Expected pwr_enable=0, iso_en=1.
ERROR: UPF Wake-Up Sequence Flaw! Isolation dropped prematurely.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
TEST_FAILED
/workspace/banchmarks/pashencev/03_low_power_design/task_34/tb.v:95: $finish called at 86000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_10 run_20260426_141859_833435_7c9834 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__03_low_power_design__task_34\samples\run_20260426_141859_833435_7c9834__sample_10
generated.v preview 
module soc_top (
    input clk,
    input rst_n,
    input sleep_req,
    input [31:0] data_in,
    output [31:0] data_out,
    output pwr_enable,
    output iso_en
);

    wire pd_dsp_clk;
    wire pd_dsp_rst_n;
    wire pd_dsp_sleep_req;
    wire pd_dsp_data_in;
    wire pd_dsp_data_out;

    // Instantiate submodules
    aon_ctrl aon_ctrl_inst (
        .clk(clk),
        .rst_n(rst_n),
        .sleep_req(sleep_req),
        .pwr_enable(pwr_enable),
        .iso_en(iso_en)
    );

    pd_dsp pd_dsp_inst (
        .clk(pd_dsp_clk),
        .rst_n(pd_dsp_rst_n),
        .data_in(pd_dsp_data_in),
        .data_out(pd_dsp_data_out)
    );
...
functional details 
[stdout]
ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
ERROR: Power Down failed. Expected pwr_enable=0, iso_en=1.
ERROR: UPF Wake-Up Sequence Flaw! Isolation dropped prematurely.
  Expected: pwr_enable=1, iso_en=1
  Got:      pwr_enable=1, iso_en=0
TEST_FAILED
/workspace/banchmarks/pashencev/03_low_power_design/task_34/tb.v:95: $finish called at 86000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR: UPF Power Down Sequence Flaw! Missing isolation safety step.",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}