07_csr_register_map_generation / task_73 | apb_sample_csr
Здесь перечислены все реальные попытки этой модели на одной задаче. По каждой попытке можно увидеть, до какой стадии она дошла, где именно сломалась и какое сообщение об ошибке вернулось из syntax, functional или synthesis.
| sample | run | extract_ok | syntax_ok | functional_ok | openlane_ok | final_success | failure_stage | failure_reason | details |
|---|---|---|---|---|---|---|---|---|---|
| sample_1 | run_20260424_144121_405769_1acdc5 | ok | ok | ok | ok | ok | success | Full pipeline success |
Open detailssample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__07_csr_register_map_generation__task_73\samples\run_20260424_144121_405769_1acdc5__sample_1
generated.v previewmodule apb_sample_csr (
input clk,
input rst_n,
input psel,
input penable,
input pwrite,
input [7:0] paddr,
input [31:0] pwdata,
input [3:0] pstrb,
output reg [31:0] prdata,
output reg pready,
input sample_push,
input [7:0] sample_data,
output reg [7:0] threshold,
output reg irq_out,
output reg ack_pulse
);
reg data_pending;
reg [7:0] latched_sample;
reg [31:0] reg_config;
reg [31:0] reg_status;
reg [31:0] reg_data;
reg [31:0] reg_cmd;
reg cmd_ack_written;
// Sample data handling
always @(posedge clk or negedge rst_n) begin
if (!rst_n) begin
data_pending <= 1'b0;
latched_sample <= 8'h00;
end else if (sample_push) begin
...
synthesis details[error] None outcome{
"llm_ok": true,
"extract_ok": true,
"syntax_ok": true,
"functional_ok": true,
"openlane_ok": true,
"syntax_required": true,
"functional_required": true,
"openlane_required": true,
"final_success": true,
"success": true
}
|
| sample_1 | run_20260424_172135_562392_bd9fc2 | ok | ok | failed | failed | failed | functional | Functional output contains failure marker: TEST_FAILED. ERROR: threshold write failed. |
Open detailssample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__07_csr_register_map_generation__task_73\samples\run_20260424_172135_562392_bd9fc2__sample_1
generated.v previewmodule apb_sample_csr (
input clk,
input rst_n,
input psel,
input penable,
input pwrite,
input [7:0] paddr,
input [31:0] pwdata,
input [3:0] pstrb,
output reg [31:0] prdata,
output reg pready,
input sample_push,
input [7:0] sample_data,
output reg [7:0] threshold,
output reg irq_out,
output reg ack_pulse
);
reg data_pending;
reg [7:0] latched_sample;
reg [31:0] reg_config;
reg [31:0] reg_status;
reg [31:0] reg_data;
reg [31:0] reg_cmd;
reg cmd_ack_written;
// Sample data handling
always @(posedge clk or negedge rst_n) begin
if (!rst_n) begin
data_pending <= 1'b0;
latched_sample <= 8'h00;
end else if (sample_push) begin
...
functional details[stdout] ERROR: threshold write failed. ERROR: STATUS readback failed. Got 00000000 TEST_FAILED /workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:178: $finish called at 156000 (1ps) synthesis details[error] None errors[][
{
"stage": "functional",
"code": "functional.output_failed_marker",
"message": "Functional output contains failure marker: TEST_FAILED. ERROR: threshold write failed.",
"retryable": false,
"details": {
"marker": "TEST_FAILED"
}
},
{
"stage": "openlane",
"code": "openlane.invalidated_by_functional_failure",
"message": "OpenLane result invalidated because functional validation failed after output-marker correction",
"retryable": false,
"details": {}
}
]
outcome{
"llm_ok": true,
"extract_ok": true,
"syntax_ok": true,
"functional_ok": false,
"openlane_ok": false,
"syntax_required": true,
"functional_required": true,
"openlane_required": true,
"final_success": false,
"success": false
}
|
| sample_1 | run_20260424_230145_632624_082334 | ok | ok | failed | failed | failed | functional | Functional output contains failure marker: TEST_FAILED. ERROR: reset values are incorrect. |
Open detailssample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__07_csr_register_map_generation__task_73\samples\run_20260424_230145_632624_082334__sample_1
generated.v previewmodule apb_sample_csr (
input clk,
input rst_n,
input psel,
input penable,
input pwrite,
input [7:0] paddr,
input [31:0] pwdata,
input [3:0] pstrb,
output reg [31:0] prdata,
output reg pready,
input sample_push,
input [7:0] sample_data,
output reg [7:0] threshold,
output reg irq_out,
output reg ack_pulse
);
reg data_pending;
reg [7:0] latched_sample;
reg ack_written;
// Register definitions
reg [31:0] config_reg;
reg [31:0] status_reg;
reg [31:0] data_reg;
reg [31:0] cmd_reg;
// APB handshake
reg apb_write;
reg apb_read;
...
functional details[stdout] ERROR: reset values are incorrect. ERROR: sample_push did not set data_pending. ERROR: STATUS readback failed. Got 00000000 ERROR: DATA readback failed. Got 00000000 ERROR: DATA read did not clear data_pending. ERROR: ack_pulse did not assert. TEST_FAILED /workspace/banchmarks/pashencev/07_csr_register_map_generation/task_73/tb.v:178: $finish called at 156000 (1ps) synthesis details[error] None errors[][
{
"stage": "functional",
"code": "functional.output_failed_marker",
"message": "Functional output contains failure marker: TEST_FAILED. ERROR: reset values are incorrect.",
"retryable": false,
"details": {
"marker": "TEST_FAILED"
}
},
{
"stage": "openlane",
"code": "openlane.invalidated_by_functional_failure",
"message": "OpenLane result invalidated because functional validation failed after output-marker correction",
"retryable": false,
"details": {}
}
]
outcome{
"llm_ok": true,
"extract_ok": true,
"syntax_ok": true,
"functional_ok": false,
"openlane_ok": false,
"syntax_required": true,
"functional_required": true,
"openlane_required": true,
"final_success": false,
"success": false
}
|
| sample_1 | run_20260426_141859_833435_7c9834 | ok | ok | failed | failed | failed | functional | Functional output contains failure marker: TEST_FAILED. ERROR: threshold write failed. |
Open detailssample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__07_csr_register_map_generation__task_73\samples\run_20260426_141859_833435_7c9834__sample_1
generated.v previewmodule apb_sample_csr (
input clk,
input rst_n,
input psel,
input penable,
input pwrite,
input [7:0] paddr,
input [31:0] pwdata,
input [3:0] pstrb,
output reg [31:0] prdata,
output reg pready,
input sample_push,
input [7:0] sample_data,
output reg [7:0] threshold,
output reg irq_out,
output reg ack_pulse
);
reg data_pending;
reg [7:0] latched_sample;
reg ack_written;
// Register definitions
reg [31:0] CONFIG;
reg [31:0] STATUS;
reg [31:0] DATA;
reg [31:0] CMD;
// APB state machine
reg apb_write;
reg apb_read;
...
functional details[stdout] ERROR: threshold write failed. ERROR: sample_push did not set data_pending. TEST_FAILED /workspace/banchmarks/pashencev/07_csr_register_map_generation/task_73/tb.v:178: $finish called at 156000 (1ps) synthesis details[error] None errors[][
{
"stage": "functional",
"code": "functional.output_failed_marker",
"message": "Functional output contains failure marker: TEST_FAILED. ERROR: threshold write failed.",
"retryable": false,
"details": {
"marker": "TEST_FAILED"
}
},
{
"stage": "openlane",
"code": "openlane.invalidated_by_functional_failure",
"message": "OpenLane result invalidated because functional validation failed after output-marker correction",
"retryable": false,
"details": {}
}
]
outcome{
"llm_ok": true,
"extract_ok": true,
"syntax_ok": true,
"functional_ok": false,
"openlane_ok": false,
"syntax_required": true,
"functional_required": true,
"openlane_required": true,
"final_success": false,
"success": false
}
|
| sample_2 | run_20260424_144121_405769_1acdc5 | ok | ok | ok | ok | ok | success | Full pipeline success |
Open detailssample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__07_csr_register_map_generation__task_73\samples\run_20260424_144121_405769_1acdc5__sample_2
generated.v previewmodule apb_sample_csr (
input clk,
input rst_n,
input psel,
input penable,
input pwrite,
input [7:0] paddr,
input [31:0] pwdata,
input [3:0] pstrb,
output reg [31:0] prdata,
output reg pready,
input sample_push,
input [7:0] sample_data,
output reg [7:0] threshold,
output reg irq_out,
output reg ack_pulse
);
reg data_pending;
reg [7:0] latched_sample;
reg [31:0] reg_config;
reg [31:0] reg_status;
reg [31:0] reg_data;
reg [31:0] reg_cmd;
reg apb_write;
reg apb_read;
reg [31:0] apb_rdata;
reg [31:0] apb_wdata;
reg [3:0] apb_strb;
reg [7:0] apb_addr;
...
synthesis details[error] None outcome{
"llm_ok": true,
"extract_ok": true,
"syntax_ok": true,
"functional_ok": true,
"openlane_ok": true,
"syntax_required": true,
"functional_required": true,
"openlane_required": true,
"final_success": true,
"success": true
}
|
| sample_2 | run_20260424_172135_562392_bd9fc2 | ok | ok | failed | failed | failed | functional | Functional output contains failure marker: TEST_FAILED. ERROR: threshold write failed. |
Open detailssample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__07_csr_register_map_generation__task_73\samples\run_20260424_172135_562392_bd9fc2__sample_2
generated.v previewmodule apb_sample_csr (
input clk,
input rst_n,
input psel,
input penable,
input pwrite,
input [7:0] paddr,
input [31:0] pwdata,
input [3:0] pstrb,
output reg [31:0] prdata,
output reg pready,
input sample_push,
input [7:0] sample_data,
output reg [7:0] threshold,
output reg irq_out,
output reg ack_pulse
);
reg data_pending;
reg [7:0] latched_sample;
reg [31:0] reg_config;
reg [31:0] reg_status;
reg [31:0] reg_data;
reg [31:0] reg_cmd;
reg cmd_ack_written;
// Register write logic
always @(posedge clk or negedge rst_n) begin
if (!rst_n) begin
reg_config <= 8'h20;
reg_status <= 1'b0;
reg_data <= 8'h00;
...
functional details[stdout] ERROR: threshold write failed. ERROR: sample_push did not set data_pending. ERROR: STATUS readback failed. Got 7fffffff ERROR: ack_pulse did not assert. TEST_FAILED /workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:178: $finish called at 156000 (1ps) synthesis details[error] None errors[][
{
"stage": "functional",
"code": "functional.output_failed_marker",
"message": "Functional output contains failure marker: TEST_FAILED. ERROR: threshold write failed.",
"retryable": false,
"details": {
"marker": "TEST_FAILED"
}
},
{
"stage": "openlane",
"code": "openlane.invalidated_by_functional_failure",
"message": "OpenLane result invalidated because functional validation failed after output-marker correction",
"retryable": false,
"details": {}
}
]
outcome{
"llm_ok": true,
"extract_ok": true,
"syntax_ok": true,
"functional_ok": false,
"openlane_ok": false,
"syntax_required": true,
"functional_required": true,
"openlane_required": true,
"final_success": false,
"success": false
}
|
| sample_2 | run_20260424_230145_632624_082334 | ok | ok | failed | failed | failed | functional | Functional output contains failure marker: TEST_FAILED. ERROR: threshold write failed. |
Open detailssample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__07_csr_register_map_generation__task_73\samples\run_20260424_230145_632624_082334__sample_2
generated.v previewmodule apb_sample_csr (
input clk,
input rst_n,
input psel,
input penable,
input pwrite,
input [7:0] paddr,
input [31:0] pwdata,
input [3:0] pstrb,
output reg [31:0] prdata,
output reg pready,
input sample_push,
input [7:0] sample_data,
output reg [7:0] threshold,
output reg irq_out,
output reg ack_pulse
);
reg [7:0] config_reg;
reg data_pending;
reg [7:0] latched_sample;
reg [31:0] data_reg;
reg [31:0] cmd_reg;
// Register write logic
always @(posedge clk or negedge rst_n) begin
if (!rst_n) begin
config_reg <= 8'h20;
data_pending <= 1'b0;
latched_sample <= 8'h00;
data_reg <= 32'h00000000;
cmd_reg <= 32'h00000000;
...
syntax details[stderr] /data/eval/out/run_20260424_230145_632624_082334/tmp/qwen3_coder_30b/pashencev__07_csr_register_map_generation__task_73/sample_2/generated.v:73: warning: Extra digits given for sized hex constant. functional details[stdout] ERROR: threshold write failed. ERROR: sample_push did not set data_pending. TEST_FAILED /workspace/banchmarks/pashencev/07_csr_register_map_generation/task_73/tb.v:178: $finish called at 156000 (1ps) synthesis details[error] None errors[][
{
"stage": "functional",
"code": "functional.output_failed_marker",
"message": "Functional output contains failure marker: TEST_FAILED. ERROR: threshold write failed.",
"retryable": false,
"details": {
"marker": "TEST_FAILED"
}
},
{
"stage": "openlane",
"code": "openlane.invalidated_by_functional_failure",
"message": "OpenLane result invalidated because functional validation failed after output-marker correction",
"retryable": false,
"details": {}
}
]
outcome{
"llm_ok": true,
"extract_ok": true,
"syntax_ok": true,
"functional_ok": false,
"openlane_ok": false,
"syntax_required": true,
"functional_required": true,
"openlane_required": true,
"final_success": false,
"success": false
}
|
| sample_2 | run_20260426_141859_833435_7c9834 | ok | ok | failed | failed | failed | functional | Functional output contains failure marker: TEST_FAILED. ERROR: threshold write failed. |
Open detailssample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__07_csr_register_map_generation__task_73\samples\run_20260426_141859_833435_7c9834__sample_2
generated.v previewmodule apb_sample_csr (
input clk,
input rst_n,
input psel,
input penable,
input pwrite,
input [7:0] paddr,
input [31:0] pwdata,
input [3:0] pstrb,
output reg [31:0] prdata,
output reg pready,
input sample_push,
input [7:0] sample_data,
output reg [7:0] threshold,
output reg irq_out,
output reg ack_pulse
);
reg data_pending;
reg [7:0] latched_sample;
reg [31:0] reg_config;
reg [31:0] reg_status;
reg [31:0] reg_data;
reg [31:0] reg_cmd;
reg apb_write;
reg apb_read;
reg [31:0] apb_rdata;
reg [31:0] apb_wdata;
reg [3:0] apb_strb;
reg [7:0] apb_addr;
...
functional details[stdout] ERROR: threshold write failed. ERROR: sample_push did not set data_pending. TEST_FAILED /workspace/banchmarks/pashencev/07_csr_register_map_generation/task_73/tb.v:178: $finish called at 156000 (1ps) synthesis details[error] None errors[][
{
"stage": "functional",
"code": "functional.output_failed_marker",
"message": "Functional output contains failure marker: TEST_FAILED. ERROR: threshold write failed.",
"retryable": false,
"details": {
"marker": "TEST_FAILED"
}
},
{
"stage": "openlane",
"code": "openlane.invalidated_by_functional_failure",
"message": "OpenLane result invalidated because functional validation failed after output-marker correction",
"retryable": false,
"details": {}
}
]
outcome{
"llm_ok": true,
"extract_ok": true,
"syntax_ok": true,
"functional_ok": false,
"openlane_ok": false,
"syntax_required": true,
"functional_required": true,
"openlane_required": true,
"final_success": false,
"success": false
}
|
| sample_3 | run_20260424_144121_405769_1acdc5 | ok | ok | ok | ok | ok | success | Full pipeline success |
Open detailssample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__07_csr_register_map_generation__task_73\samples\run_20260424_144121_405769_1acdc5__sample_3
generated.v previewmodule apb_sample_csr (
input clk,
input rst_n,
input psel,
input penable,
input pwrite,
input [7:0] paddr,
input [31:0] pwdata,
input [3:0] pstrb,
output reg [31:0] prdata,
output reg pready,
input sample_push,
input [7:0] sample_data,
output reg [7:0] threshold,
output reg irq_out,
output reg ack_pulse
);
reg data_pending;
reg [7:0] latched_sample;
reg [31:0] reg_config;
reg [31:0] reg_status;
reg [31:0] reg_data;
reg [31:0] reg_cmd;
reg apb_write;
reg apb_read;
reg [31:0] apb_rdata;
reg [31:0] apb_wdata;
reg [3:0] apb_strb;
reg [7:0] apb_addr;
...
synthesis details[error] None outcome{
"llm_ok": true,
"extract_ok": true,
"syntax_ok": true,
"functional_ok": true,
"openlane_ok": true,
"syntax_required": true,
"functional_required": true,
"openlane_required": true,
"final_success": true,
"success": true
}
|
| sample_3 | run_20260424_172135_562392_bd9fc2 | ok | ok | failed | failed | failed | functional | Functional output contains failure marker: TEST_FAILED. ERROR: reset values are incorrect. |
Open detailssample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__07_csr_register_map_generation__task_73\samples\run_20260424_172135_562392_bd9fc2__sample_3
generated.v previewmodule apb_sample_csr (
input clk,
input rst_n,
input psel,
input penable,
input pwrite,
input [7:0] paddr,
input [31:0] pwdata,
input [3:0] pstrb,
output reg [31:0] prdata,
output reg pready,
input sample_push,
input [7:0] sample_data,
output reg [7:0] threshold,
output reg irq_out,
output reg ack_pulse
);
reg data_pending;
reg [7:0] latched_sample;
reg ack_written;
// Register definitions
reg [31:0] config_reg;
reg [31:0] status_reg;
reg [31:0] data_reg;
reg [31:0] cmd_reg;
// APB handshake
reg apb_write;
reg apb_read;
...
functional details[stdout] ERROR: reset values are incorrect. ERROR: threshold write failed. ERROR: sample_push did not set data_pending. ERROR: STATUS readback failed. Got 00000000 ERROR: ack_pulse did not assert. TEST_FAILED /workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:178: $finish called at 156000 (1ps) synthesis details[error] None errors[][
{
"stage": "functional",
"code": "functional.output_failed_marker",
"message": "Functional output contains failure marker: TEST_FAILED. ERROR: reset values are incorrect.",
"retryable": false,
"details": {
"marker": "TEST_FAILED"
}
},
{
"stage": "openlane",
"code": "openlane.invalidated_by_functional_failure",
"message": "OpenLane result invalidated because functional validation failed after output-marker correction",
"retryable": false,
"details": {}
}
]
outcome{
"llm_ok": true,
"extract_ok": true,
"syntax_ok": true,
"functional_ok": false,
"openlane_ok": false,
"syntax_required": true,
"functional_required": true,
"openlane_required": true,
"final_success": false,
"success": false
}
|
| sample_3 | run_20260424_230145_632624_082334 | ok | ok | failed | failed | failed | functional | Functional output contains failure marker: TEST_FAILED. ERROR: sample_push did not set data_pending. |
Open detailssample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__07_csr_register_map_generation__task_73\samples\run_20260424_230145_632624_082334__sample_3
generated.v previewmodule apb_sample_csr (
input clk,
input rst_n,
input psel,
input penable,
input pwrite,
input [7:0] paddr,
input [31:0] pwdata,
input [3:0] pstrb,
output reg [31:0] prdata,
output reg pready,
input sample_push,
input [7:0] sample_data,
output reg [7:0] threshold,
output reg irq_out,
output reg ack_pulse
);
reg data_pending;
reg [7:0] latched_sample;
reg ack_written;
// Register definitions
reg [31:0] CONFIG;
reg [31:0] STATUS;
reg [31:0] DATA;
reg [31:0] CMD;
// APB state machine
reg apb_write;
reg apb_read;
...
functional details[stdout] ERROR: sample_push did not set data_pending. TEST_FAILED /workspace/banchmarks/pashencev/07_csr_register_map_generation/task_73/tb.v:178: $finish called at 156000 (1ps) synthesis details[error] None errors[][
{
"stage": "functional",
"code": "functional.output_failed_marker",
"message": "Functional output contains failure marker: TEST_FAILED. ERROR: sample_push did not set data_pending.",
"retryable": false,
"details": {
"marker": "TEST_FAILED"
}
},
{
"stage": "openlane",
"code": "openlane.invalidated_by_functional_failure",
"message": "OpenLane result invalidated because functional validation failed after output-marker correction",
"retryable": false,
"details": {}
}
]
outcome{
"llm_ok": true,
"extract_ok": true,
"syntax_ok": true,
"functional_ok": false,
"openlane_ok": false,
"syntax_required": true,
"functional_required": true,
"openlane_required": true,
"final_success": false,
"success": false
}
|
| sample_3 | run_20260426_141859_833435_7c9834 | ok | ok | failed | failed | failed | functional | Functional output contains failure marker: TEST_FAILED. ERROR: threshold write failed. |
Open detailssample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__07_csr_register_map_generation__task_73\samples\run_20260426_141859_833435_7c9834__sample_3
generated.v previewmodule apb_sample_csr (
input clk,
input rst_n,
input psel,
input penable,
input pwrite,
input [7:0] paddr,
input [31:0] pwdata,
input [3:0] pstrb,
output reg [31:0] prdata,
output reg pready,
input sample_push,
input [7:0] sample_data,
output reg [7:0] threshold,
output reg irq_out,
output reg ack_pulse
);
reg [7:0] config_reg;
reg data_pending;
reg [7:0] latched_sample;
// Register definitions
reg [31:0] config_data;
reg [31:0] status_data;
reg [31:0] data_data;
reg [31:0] cmd_data;
// Internal signals
reg write_enable;
reg read_enable;
reg [31:0] reg_data_out;
...
functional details[stdout] ERROR: threshold write failed. ERROR: DATA read did not clear data_pending. ERROR: STATUS should be clear after DATA read. Got 00000001 TEST_FAILED /workspace/banchmarks/pashencev/07_csr_register_map_generation/task_73/tb.v:178: $finish called at 156000 (1ps) synthesis details[error] None errors[][
{
"stage": "functional",
"code": "functional.output_failed_marker",
"message": "Functional output contains failure marker: TEST_FAILED. ERROR: threshold write failed.",
"retryable": false,
"details": {
"marker": "TEST_FAILED"
}
},
{
"stage": "openlane",
"code": "openlane.invalidated_by_functional_failure",
"message": "OpenLane result invalidated because functional validation failed after output-marker correction",
"retryable": false,
"details": {}
}
]
outcome{
"llm_ok": true,
"extract_ok": true,
"syntax_ok": true,
"functional_ok": false,
"openlane_ok": false,
"syntax_required": true,
"functional_required": true,
"openlane_required": true,
"final_success": false,
"success": false
}
|
| sample_4 | run_20260424_172135_562392_bd9fc2 | ok | ok | failed | failed | failed | functional | Functional output contains failure marker: TEST_FAILED. ERROR: threshold write failed. |
Open detailssample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__07_csr_register_map_generation__task_73\samples\run_20260424_172135_562392_bd9fc2__sample_4
generated.v previewmodule apb_sample_csr (
input clk,
input rst_n,
input psel,
input penable,
input pwrite,
input [7:0] paddr,
input [31:0] pwdata,
input [3:0] pstrb,
output reg [31:0] prdata,
output reg pready,
input sample_push,
input [7:0] sample_data,
output reg [7:0] threshold,
output reg irq_out,
output reg ack_pulse
);
reg [7:0] config_reg;
reg data_pending;
reg [7:0] latched_sample;
reg [31:0] data_reg;
reg [31:0] cmd_reg;
// Register write logic
always @(posedge clk or negedge rst_n) begin
if (!rst_n) begin
config_reg <= 8'h20;
data_pending <= 1'b0;
latched_sample <= 8'h00;
data_reg <= 32'h00000000;
cmd_reg <= 32'h00000000;
...
syntax details[stderr] /data/eval/out/run_20260424_172135_562392_bd9fc2/tmp/qwen3_coder_30b/07_csr_register_map_generation__task_73/sample_4/generated.v:72: warning: Extra digits given for sized hex constant. functional details[stdout] ERROR: threshold write failed. ERROR: sample_push did not set data_pending. TEST_FAILED /workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:178: $finish called at 156000 (1ps) synthesis details[error] None errors[][
{
"stage": "functional",
"code": "functional.output_failed_marker",
"message": "Functional output contains failure marker: TEST_FAILED. ERROR: threshold write failed.",
"retryable": false,
"details": {
"marker": "TEST_FAILED"
}
},
{
"stage": "openlane",
"code": "openlane.invalidated_by_functional_failure",
"message": "OpenLane result invalidated because functional validation failed after output-marker correction",
"retryable": false,
"details": {}
}
]
outcome{
"llm_ok": true,
"extract_ok": true,
"syntax_ok": true,
"functional_ok": false,
"openlane_ok": false,
"syntax_required": true,
"functional_required": true,
"openlane_required": true,
"final_success": false,
"success": false
}
|
| sample_4 | run_20260424_230145_632624_082334 | ok | ok | failed | failed | failed | functional | Functional output contains failure marker: TEST_FAILED. ERROR: threshold write failed. |
Open detailssample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__07_csr_register_map_generation__task_73\samples\run_20260424_230145_632624_082334__sample_4
generated.v previewmodule apb_sample_csr (
input clk,
input rst_n,
input psel,
input penable,
input pwrite,
input [7:0] paddr,
input [31:0] pwdata,
input [3:0] pstrb,
output reg [31:0] prdata,
output reg pready,
input sample_push,
input [7:0] sample_data,
output reg [7:0] threshold,
output reg irq_out,
output reg ack_pulse
);
reg data_pending;
reg [7:0] latched_sample;
reg [31:0] reg_config;
reg [31:0] reg_status;
reg [31:0] reg_data;
reg [31:0] reg_cmd;
reg apb_write;
reg apb_read;
reg [31:0] apb_rdata;
reg [31:0] apb_wdata;
reg [3:0] apb_strb;
reg [7:0] apb_addr;
...
functional details[stdout] ERROR: threshold write failed. ERROR: sample_push did not set data_pending. TEST_FAILED /workspace/banchmarks/pashencev/07_csr_register_map_generation/task_73/tb.v:178: $finish called at 156000 (1ps) synthesis details[error] None errors[][
{
"stage": "functional",
"code": "functional.output_failed_marker",
"message": "Functional output contains failure marker: TEST_FAILED. ERROR: threshold write failed.",
"retryable": false,
"details": {
"marker": "TEST_FAILED"
}
},
{
"stage": "openlane",
"code": "openlane.invalidated_by_functional_failure",
"message": "OpenLane result invalidated because functional validation failed after output-marker correction",
"retryable": false,
"details": {}
}
]
outcome{
"llm_ok": true,
"extract_ok": true,
"syntax_ok": true,
"functional_ok": false,
"openlane_ok": false,
"syntax_required": true,
"functional_required": true,
"openlane_required": true,
"final_success": false,
"success": false
}
|
| sample_4 | run_20260426_141859_833435_7c9834 | ok | ok | failed | failed | failed | functional | Functional output contains failure marker: TEST_FAILED. ERROR: threshold write failed. |
Open detailssample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__07_csr_register_map_generation__task_73\samples\run_20260426_141859_833435_7c9834__sample_4
generated.v previewmodule apb_sample_csr (
input clk,
input rst_n,
input psel,
input penable,
input pwrite,
input [7:0] paddr,
input [31:0] pwdata,
input [3:0] pstrb,
output reg [31:0] prdata,
output reg pready,
input sample_push,
input [7:0] sample_data,
output reg [7:0] threshold,
output reg irq_out,
output reg ack_pulse
);
reg [7:0] config_reg;
reg data_pending;
reg [7:0] latched_sample;
reg [31:0] data_reg;
reg [31:0] cmd_reg;
// Register write logic
always @(posedge clk or negedge rst_n) begin
if (!rst_n) begin
config_reg <= 8'h20;
data_pending <= 1'b0;
latched_sample <= 8'h00;
data_reg <= 32'h00000000;
cmd_reg <= 32'h00000000;
...
syntax details[stderr] /data/eval/out/run_20260426_141859_833435_7c9834/tmp/qwen_coder_30/pashencev__07_csr_register_map_generation__task_73/sample_4/generated.v:73: warning: Extra digits given for sized hex constant. functional details[stdout] ERROR: threshold write failed. ERROR: sample_push did not set data_pending. TEST_FAILED /workspace/banchmarks/pashencev/07_csr_register_map_generation/task_73/tb.v:178: $finish called at 156000 (1ps) synthesis details[error] None errors[][
{
"stage": "functional",
"code": "functional.output_failed_marker",
"message": "Functional output contains failure marker: TEST_FAILED. ERROR: threshold write failed.",
"retryable": false,
"details": {
"marker": "TEST_FAILED"
}
},
{
"stage": "openlane",
"code": "openlane.invalidated_by_functional_failure",
"message": "OpenLane result invalidated because functional validation failed after output-marker correction",
"retryable": false,
"details": {}
}
]
outcome{
"llm_ok": true,
"extract_ok": true,
"syntax_ok": true,
"functional_ok": false,
"openlane_ok": false,
"syntax_required": true,
"functional_required": true,
"openlane_required": true,
"final_success": false,
"success": false
}
|
| sample_5 | run_20260424_172135_562392_bd9fc2 | ok | ok | failed | failed | failed | functional | Functional output contains failure marker: TEST_FAILED. ERROR: threshold write failed. |
Open detailssample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__07_csr_register_map_generation__task_73\samples\run_20260424_172135_562392_bd9fc2__sample_5
generated.v previewmodule apb_sample_csr (
input clk,
input rst_n,
input psel,
input penable,
input pwrite,
input [7:0] paddr,
input [31:0] pwdata,
input [3:0] pstrb,
output reg [31:0] prdata,
output reg pready,
input sample_push,
input [7:0] sample_data,
output reg [7:0] threshold,
output reg irq_out,
output reg ack_pulse
);
reg data_pending;
reg [7:0] latched_sample;
reg [31:0] reg_config;
reg [31:0] reg_status;
reg [31:0] reg_data;
reg [31:0] reg_cmd;
reg apb_write;
reg apb_read;
reg [31:0] apb_rdata;
reg [31:0] apb_wdata;
reg [3:0] apb_strb;
reg [7:0] apb_addr;
...
functional details[stdout] ERROR: threshold write failed. ERROR: sample_push did not set data_pending. TEST_FAILED /workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:178: $finish called at 156000 (1ps) synthesis details[error] None errors[][
{
"stage": "functional",
"code": "functional.output_failed_marker",
"message": "Functional output contains failure marker: TEST_FAILED. ERROR: threshold write failed.",
"retryable": false,
"details": {
"marker": "TEST_FAILED"
}
},
{
"stage": "openlane",
"code": "openlane.invalidated_by_functional_failure",
"message": "OpenLane result invalidated because functional validation failed after output-marker correction",
"retryable": false,
"details": {}
}
]
outcome{
"llm_ok": true,
"extract_ok": true,
"syntax_ok": true,
"functional_ok": false,
"openlane_ok": false,
"syntax_required": true,
"functional_required": true,
"openlane_required": true,
"final_success": false,
"success": false
}
|
| sample_5 | run_20260424_230145_632624_082334 | ok | ok | failed | failed | failed | functional | Functional output contains failure marker: TEST_FAILED. ERROR: threshold write failed. |
Open detailssample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__07_csr_register_map_generation__task_73\samples\run_20260424_230145_632624_082334__sample_5
generated.v previewmodule apb_sample_csr (
input clk,
input rst_n,
input psel,
input penable,
input pwrite,
input [7:0] paddr,
input [31:0] pwdata,
input [3:0] pstrb,
output reg [31:0] prdata,
output reg pready,
input sample_push,
input [7:0] sample_data,
output reg [7:0] threshold,
output reg irq_out,
output reg ack_pulse
);
reg [7:0] config_reg;
reg data_pending;
reg [7:0] latched_sample;
reg [31:0] data_reg;
reg [31:0] cmd_reg;
// Sample data handling
always @(posedge clk or negedge rst_n) begin
if (!rst_n) begin
data_pending <= 1'b0;
latched_sample <= 8'h00;
end else if (sample_push) begin
latched_sample <= sample_data;
data_pending <= 1'b1;
...
syntax details[stderr] /data/eval/out/run_20260424_230145_632624_082334/tmp/qwen3_coder_30b/pashencev__07_csr_register_map_generation__task_73/sample_5/generated.v:78: warning: Extra digits given for sized hex constant. functional details[stdout] ERROR: threshold write failed. TEST_FAILED /workspace/banchmarks/pashencev/07_csr_register_map_generation/task_73/tb.v:178: $finish called at 156000 (1ps) synthesis details[error] None errors[][
{
"stage": "functional",
"code": "functional.output_failed_marker",
"message": "Functional output contains failure marker: TEST_FAILED. ERROR: threshold write failed.",
"retryable": false,
"details": {
"marker": "TEST_FAILED"
}
},
{
"stage": "openlane",
"code": "openlane.invalidated_by_functional_failure",
"message": "OpenLane result invalidated because functional validation failed after output-marker correction",
"retryable": false,
"details": {}
}
]
outcome{
"llm_ok": true,
"extract_ok": true,
"syntax_ok": true,
"functional_ok": false,
"openlane_ok": false,
"syntax_required": true,
"functional_required": true,
"openlane_required": true,
"final_success": false,
"success": false
}
|
| sample_5 | run_20260426_141859_833435_7c9834 | ok | ok | failed | failed | failed | functional | Functional output contains failure marker: TEST_FAILED. ERROR: DATA read did not clear data_pending. |
Open detailssample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__07_csr_register_map_generation__task_73\samples\run_20260426_141859_833435_7c9834__sample_5
generated.v previewmodule apb_sample_csr (
input clk,
input rst_n,
input psel,
input penable,
input pwrite,
input [7:0] paddr,
input [31:0] pwdata,
input [3:0] pstrb,
output reg [31:0] prdata,
output reg pready,
input sample_push,
input [7:0] sample_data,
output reg [7:0] threshold,
output reg irq_out,
output reg ack_pulse
);
reg data_pending;
reg [7:0] latched_sample;
reg ack_written;
// Register definitions
reg [31:0] CONFIG;
reg [31:0] STATUS;
reg [31:0] DATA;
reg [31:0] CMD;
// APB state machine
reg apb_write;
reg apb_read;
...
functional details[stdout] ERROR: DATA read did not clear data_pending. TEST_FAILED /workspace/banchmarks/pashencev/07_csr_register_map_generation/task_73/tb.v:178: $finish called at 156000 (1ps) synthesis details[error] None errors[][
{
"stage": "functional",
"code": "functional.output_failed_marker",
"message": "Functional output contains failure marker: TEST_FAILED. ERROR: DATA read did not clear data_pending.",
"retryable": false,
"details": {
"marker": "TEST_FAILED"
}
},
{
"stage": "openlane",
"code": "openlane.invalidated_by_functional_failure",
"message": "OpenLane result invalidated because functional validation failed after output-marker correction",
"retryable": false,
"details": {}
}
]
outcome{
"llm_ok": true,
"extract_ok": true,
"syntax_ok": true,
"functional_ok": false,
"openlane_ok": false,
"syntax_required": true,
"functional_required": true,
"openlane_required": true,
"final_success": false,
"success": false
}
|
| sample_6 | run_20260424_172135_562392_bd9fc2 | ok | ok | failed | failed | failed | functional | Functional output contains failure marker: TEST_FAILED. ERROR: reset values are incorrect. |
Open detailssample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__07_csr_register_map_generation__task_73\samples\run_20260424_172135_562392_bd9fc2__sample_6
generated.v previewmodule apb_sample_csr (
input clk,
input rst_n,
input psel,
input penable,
input pwrite,
input [7:0] paddr,
input [31:0] pwdata,
input [3:0] pstrb,
output reg [31:0] prdata,
output reg pready,
input sample_push,
input [7:0] sample_data,
output reg [7:0] threshold,
output reg irq_out,
output reg ack_pulse
);
reg data_pending;
reg [7:0] latched_sample;
reg ack_written;
// Register definitions
reg [31:0] config_reg;
reg [31:0] status_reg;
reg [31:0] data_reg;
reg [31:0] cmd_reg;
// APB handshake
reg apb_write;
reg apb_read;
...
functional details[stdout] ERROR: reset values are incorrect. ERROR: threshold write failed. ERROR: STATUS readback failed. Got 00000000 ERROR: DATA read did not clear data_pending. ERROR: ack_pulse did not assert. TEST_FAILED /workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:178: $finish called at 156000 (1ps) synthesis details[error] None errors[][
{
"stage": "functional",
"code": "functional.output_failed_marker",
"message": "Functional output contains failure marker: TEST_FAILED. ERROR: reset values are incorrect.",
"retryable": false,
"details": {
"marker": "TEST_FAILED"
}
},
{
"stage": "openlane",
"code": "openlane.invalidated_by_functional_failure",
"message": "OpenLane result invalidated because functional validation failed after output-marker correction",
"retryable": false,
"details": {}
}
]
outcome{
"llm_ok": true,
"extract_ok": true,
"syntax_ok": true,
"functional_ok": false,
"openlane_ok": false,
"syntax_required": true,
"functional_required": true,
"openlane_required": true,
"final_success": false,
"success": false
}
|
| sample_6 | run_20260424_230145_632624_082334 | ok | ok | failed | failed | failed | functional | Functional output contains failure marker: TEST_FAILED. ERROR: threshold write failed. |
Open detailssample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__07_csr_register_map_generation__task_73\samples\run_20260424_230145_632624_082334__sample_6
generated.v previewmodule apb_sample_csr (
input clk,
input rst_n,
input psel,
input penable,
input pwrite,
input [7:0] paddr,
input [31:0] pwdata,
input [3:0] pstrb,
output reg [31:0] prdata,
output reg pready,
input sample_push,
input [7:0] sample_data,
output reg [7:0] threshold,
output reg irq_out,
output reg ack_pulse
);
reg data_pending;
reg [7:0] latched_sample;
reg [31:0] reg_config;
reg [31:0] reg_status;
reg [31:0] reg_data;
reg [31:0] reg_cmd;
reg apb_write;
reg apb_read;
reg [31:0] apb_rdata;
reg [31:0] apb_wdata;
reg [3:0] apb_strb;
reg [7:0] apb_addr;
...
functional details[stdout] ERROR: threshold write failed. ERROR: sample_push did not set data_pending. ERROR: STATUS readback failed. Got xxxxxxxx ERROR: DATA readback failed. Got 00000001 ERROR: STATUS should be clear after DATA read. Got 000000ab TEST_FAILED /workspace/banchmarks/pashencev/07_csr_register_map_generation/task_73/tb.v:178: $finish called at 156000 (1ps) synthesis details[error] None errors[][
{
"stage": "functional",
"code": "functional.output_failed_marker",
"message": "Functional output contains failure marker: TEST_FAILED. ERROR: threshold write failed.",
"retryable": false,
"details": {
"marker": "TEST_FAILED"
}
},
{
"stage": "openlane",
"code": "openlane.invalidated_by_functional_failure",
"message": "OpenLane result invalidated because functional validation failed after output-marker correction",
"retryable": false,
"details": {}
}
]
outcome{
"llm_ok": true,
"extract_ok": true,
"syntax_ok": true,
"functional_ok": false,
"openlane_ok": false,
"syntax_required": true,
"functional_required": true,
"openlane_required": true,
"final_success": false,
"success": false
}
|
| sample_6 | run_20260426_141859_833435_7c9834 | ok | ok | failed | failed | failed | functional | Functional output contains failure marker: TEST_FAILED. ERROR: reset values are incorrect. |
Open detailssample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__07_csr_register_map_generation__task_73\samples\run_20260426_141859_833435_7c9834__sample_6
generated.v previewmodule apb_sample_csr (
input clk,
input rst_n,
input psel,
input penable,
input pwrite,
input [7:0] paddr,
input [31:0] pwdata,
input [3:0] pstrb,
output reg [31:0] prdata,
output reg pready,
input sample_push,
input [7:0] sample_data,
output reg [7:0] threshold,
output reg irq_out,
output reg ack_pulse
);
reg [7:0] config_reg;
reg data_pending;
reg [7:0] latched_sample;
reg [31:0] data_reg;
reg [31:0] cmd_reg;
// Sample data handling
always @(posedge clk or negedge rst_n) begin
if (!rst_n) begin
data_pending <= 1'b0;
latched_sample <= 8'h00;
end else if (sample_push) begin
latched_sample <= sample_data;
data_pending <= 1'b1;
...
syntax details[stderr] /data/eval/out/run_20260426_141859_833435_7c9834/tmp/qwen_coder_30/pashencev__07_csr_register_map_generation__task_73/sample_6/generated.v:60: warning: Extra digits given for sized hex constant. functional details[stdout] ERROR: reset values are incorrect. TEST_FAILED /workspace/banchmarks/pashencev/07_csr_register_map_generation/task_73/tb.v:178: $finish called at 156000 (1ps) synthesis details[error] None errors[][
{
"stage": "functional",
"code": "functional.output_failed_marker",
"message": "Functional output contains failure marker: TEST_FAILED. ERROR: reset values are incorrect.",
"retryable": false,
"details": {
"marker": "TEST_FAILED"
}
},
{
"stage": "openlane",
"code": "openlane.invalidated_by_functional_failure",
"message": "OpenLane result invalidated because functional validation failed after output-marker correction",
"retryable": false,
"details": {}
}
]
outcome{
"llm_ok": true,
"extract_ok": true,
"syntax_ok": true,
"functional_ok": false,
"openlane_ok": false,
"syntax_required": true,
"functional_required": true,
"openlane_required": true,
"final_success": false,
"success": false
}
|
| sample_7 | run_20260424_172135_562392_bd9fc2 | ok | ok | failed | failed | failed | functional | Functional output contains failure marker: TEST_FAILED. ERROR: sample_push did not set data_pending. |
Open detailssample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__07_csr_register_map_generation__task_73\samples\run_20260424_172135_562392_bd9fc2__sample_7
generated.v previewmodule apb_sample_csr (
input clk,
input rst_n,
input psel,
input penable,
input pwrite,
input [7:0] paddr,
input [31:0] pwdata,
input [3:0] pstrb,
output reg [31:0] prdata,
output reg pready,
input sample_push,
input [7:0] sample_data,
output reg [7:0] threshold,
output reg irq_out,
output reg ack_pulse
);
reg [7:0] config_reg;
reg data_pending;
reg [7:0] latched_sample;
// Register definitions
reg [31:0] config_data;
reg [31:0] status_data;
reg [31:0] data_data;
reg [31:0] cmd_data;
// Internal signals
reg sample_push_d;
reg [7:0] sample_data_d;
...
functional details[stdout] ERROR: sample_push did not set data_pending. ERROR: DATA readback failed. Got 00000000 ERROR: DATA read did not clear data_pending. ERROR: STATUS should be clear after DATA read. Got 00000001 TEST_FAILED /workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:178: $finish called at 156000 (1ps) synthesis details[error] None errors[][
{
"stage": "functional",
"code": "functional.output_failed_marker",
"message": "Functional output contains failure marker: TEST_FAILED. ERROR: sample_push did not set data_pending.",
"retryable": false,
"details": {
"marker": "TEST_FAILED"
}
},
{
"stage": "openlane",
"code": "openlane.invalidated_by_functional_failure",
"message": "OpenLane result invalidated because functional validation failed after output-marker correction",
"retryable": false,
"details": {}
}
]
outcome{
"llm_ok": true,
"extract_ok": true,
"syntax_ok": true,
"functional_ok": false,
"openlane_ok": false,
"syntax_required": true,
"functional_required": true,
"openlane_required": true,
"final_success": false,
"success": false
}
|
| sample_7 | run_20260424_230145_632624_082334 | ok | ok | failed | failed | failed | functional | Functional output contains failure marker: TEST_FAILED. ERROR: threshold write failed. |
Open detailssample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__07_csr_register_map_generation__task_73\samples\run_20260424_230145_632624_082334__sample_7
generated.v previewmodule apb_sample_csr (
input clk,
input rst_n,
input psel,
input penable,
input pwrite,
input [7:0] paddr,
input [31:0] pwdata,
input [3:0] pstrb,
output reg [31:0] prdata,
output reg pready,
input sample_push,
input [7:0] sample_data,
output reg [7:0] threshold,
output reg irq_out,
output reg ack_pulse
);
reg data_pending;
reg [7:0] latched_sample;
reg [31:0] reg_config;
reg [31:0] reg_status;
reg [31:0] reg_data;
reg [31:0] reg_cmd;
reg apb_write;
reg apb_read;
reg [31:0] apb_rdata;
reg [31:0] apb_wdata;
reg [3:0] apb_strb;
reg [7:0] apb_addr;
...
functional details[stdout] ERROR: threshold write failed. ERROR: sample_push did not set data_pending. ERROR: STATUS readback failed. Got xxxxxxxx ERROR: DATA readback failed. Got 00000001 ERROR: STATUS should be clear after DATA read. Got 000000ab TEST_FAILED /workspace/banchmarks/pashencev/07_csr_register_map_generation/task_73/tb.v:178: $finish called at 156000 (1ps) synthesis details[error] None errors[][
{
"stage": "functional",
"code": "functional.output_failed_marker",
"message": "Functional output contains failure marker: TEST_FAILED. ERROR: threshold write failed.",
"retryable": false,
"details": {
"marker": "TEST_FAILED"
}
},
{
"stage": "openlane",
"code": "openlane.invalidated_by_functional_failure",
"message": "OpenLane result invalidated because functional validation failed after output-marker correction",
"retryable": false,
"details": {}
}
]
outcome{
"llm_ok": true,
"extract_ok": true,
"syntax_ok": true,
"functional_ok": false,
"openlane_ok": false,
"syntax_required": true,
"functional_required": true,
"openlane_required": true,
"final_success": false,
"success": false
}
|
| sample_7 | run_20260426_141859_833435_7c9834 | ok | ok | failed | failed | failed | functional | Functional output contains failure marker: TEST_FAILED. ERROR: threshold write failed. |
Open detailssample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__07_csr_register_map_generation__task_73\samples\run_20260426_141859_833435_7c9834__sample_7
generated.v previewmodule apb_sample_csr (
input clk,
input rst_n,
input psel,
input penable,
input pwrite,
input [7:0] paddr,
input [31:0] pwdata,
input [3:0] pstrb,
output reg [31:0] prdata,
output reg pready,
input sample_push,
input [7:0] sample_data,
output reg [7:0] threshold,
output reg irq_out,
output reg ack_pulse
);
reg data_pending;
reg [7:0] latched_sample;
reg [31:0] reg_config;
reg [31:0] reg_status;
reg [31:0] reg_data;
reg [31:0] reg_cmd;
reg apb_write;
reg apb_read;
reg [31:0] apb_rdata;
reg [31:0] apb_wdata;
reg [3:0] apb_strb;
reg [7:0] apb_addr;
...
functional details[stdout] ERROR: threshold write failed. ERROR: sample_push did not set data_pending. TEST_FAILED /workspace/banchmarks/pashencev/07_csr_register_map_generation/task_73/tb.v:178: $finish called at 156000 (1ps) synthesis details[error] None errors[][
{
"stage": "functional",
"code": "functional.output_failed_marker",
"message": "Functional output contains failure marker: TEST_FAILED. ERROR: threshold write failed.",
"retryable": false,
"details": {
"marker": "TEST_FAILED"
}
},
{
"stage": "openlane",
"code": "openlane.invalidated_by_functional_failure",
"message": "OpenLane result invalidated because functional validation failed after output-marker correction",
"retryable": false,
"details": {}
}
]
outcome{
"llm_ok": true,
"extract_ok": true,
"syntax_ok": true,
"functional_ok": false,
"openlane_ok": false,
"syntax_required": true,
"functional_required": true,
"openlane_required": true,
"final_success": false,
"success": false
}
|
| sample_8 | run_20260424_172135_562392_bd9fc2 | ok | ok | failed | failed | failed | functional | Functional output contains failure marker: TEST_FAILED. ERROR: reset values are incorrect. |
Open detailssample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__07_csr_register_map_generation__task_73\samples\run_20260424_172135_562392_bd9fc2__sample_8
generated.v previewmodule apb_sample_csr (
input clk,
input rst_n,
input psel,
input penable,
input pwrite,
input [7:0] paddr,
input [31:0] pwdata,
input [3:0] pstrb,
output reg [31:0] prdata,
output reg pready,
input sample_push,
input [7:0] sample_data,
output reg [7:0] threshold,
output reg irq_out,
output reg ack_pulse
);
reg [7:0] config_reg;
reg data_pending;
reg [7:0] latched_sample;
// Register block
reg [31:0] config_data;
reg [31:0] status_data;
reg [31:0] data_data;
reg [31:0] cmd_data;
// APB handshake
reg apb_write;
reg apb_read;
...
syntax details[stderr] /data/eval/out/run_20260424_172135_562392_bd9fc2/tmp/qwen3_coder_30b/07_csr_register_map_generation__task_73/sample_8/generated.v:60: warning: Extra digits given for sized hex constant. functional details[stdout] ERROR: reset values are incorrect. TEST_FAILED /workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:178: $finish called at 156000 (1ps) synthesis details[error] None errors[][
{
"stage": "functional",
"code": "functional.output_failed_marker",
"message": "Functional output contains failure marker: TEST_FAILED. ERROR: reset values are incorrect.",
"retryable": false,
"details": {
"marker": "TEST_FAILED"
}
},
{
"stage": "openlane",
"code": "openlane.invalidated_by_functional_failure",
"message": "OpenLane result invalidated because functional validation failed after output-marker correction",
"retryable": false,
"details": {}
}
]
outcome{
"llm_ok": true,
"extract_ok": true,
"syntax_ok": true,
"functional_ok": false,
"openlane_ok": false,
"syntax_required": true,
"functional_required": true,
"openlane_required": true,
"final_success": false,
"success": false
}
|
| sample_8 | run_20260424_230145_632624_082334 | ok | ok | failed | failed | failed | functional | Functional output contains failure marker: TEST_FAILED. ERROR: reset values are incorrect. |
Open detailssample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__07_csr_register_map_generation__task_73\samples\run_20260424_230145_632624_082334__sample_8
generated.v previewmodule apb_sample_csr (
input clk,
input rst_n,
input psel,
input penable,
input pwrite,
input [7:0] paddr,
input [31:0] pwdata,
input [3:0] pstrb,
output reg [31:0] prdata,
output reg pready,
input sample_push,
input [7:0] sample_data,
output reg [7:0] threshold,
output reg irq_out,
output reg ack_pulse
);
reg data_pending;
reg [7:0] latched_sample;
reg ack_written;
// Register definitions
reg [31:0] CONFIG;
reg [31:0] STATUS;
reg [31:0] DATA;
reg [31:0] CMD;
// APB handshake
reg apb_write;
reg apb_read;
...
functional details[stdout] ERROR: reset values are incorrect. ERROR: sample_push did not set data_pending. ERROR: DATA readback failed. Got 00000000 TEST_FAILED /workspace/banchmarks/pashencev/07_csr_register_map_generation/task_73/tb.v:178: $finish called at 156000 (1ps) synthesis details[error] None errors[][
{
"stage": "functional",
"code": "functional.output_failed_marker",
"message": "Functional output contains failure marker: TEST_FAILED. ERROR: reset values are incorrect.",
"retryable": false,
"details": {
"marker": "TEST_FAILED"
}
},
{
"stage": "openlane",
"code": "openlane.invalidated_by_functional_failure",
"message": "OpenLane result invalidated because functional validation failed after output-marker correction",
"retryable": false,
"details": {}
}
]
outcome{
"llm_ok": true,
"extract_ok": true,
"syntax_ok": true,
"functional_ok": false,
"openlane_ok": false,
"syntax_required": true,
"functional_required": true,
"openlane_required": true,
"final_success": false,
"success": false
}
|
| sample_8 | run_20260426_141859_833435_7c9834 | ok | ok | failed | failed | failed | functional | Functional output contains failure marker: TEST_FAILED. ERROR: threshold write failed. |
Open detailssample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__07_csr_register_map_generation__task_73\samples\run_20260426_141859_833435_7c9834__sample_8
generated.v previewmodule apb_sample_csr (
input clk,
input rst_n,
input psel,
input penable,
input pwrite,
input [7:0] paddr,
input [31:0] pwdata,
input [3:0] pstrb,
output reg [31:0] prdata,
output reg pready,
input sample_push,
input [7:0] sample_data,
output reg [7:0] threshold,
output reg irq_out,
output reg ack_pulse
);
reg data_pending;
reg [7:0] latched_sample;
reg [31:0] reg_config;
reg [31:0] reg_status;
reg [31:0] reg_data;
reg [31:0] reg_cmd;
reg apb_write;
reg apb_read;
reg [31:0] apb_rdata;
reg [31:0] apb_wdata;
reg [3:0] apb_strb;
reg [7:0] apb_addr;
...
functional details[stdout] ERROR: threshold write failed. ERROR: sample_push did not set data_pending. TEST_FAILED /workspace/banchmarks/pashencev/07_csr_register_map_generation/task_73/tb.v:178: $finish called at 156000 (1ps) synthesis details[error] None errors[][
{
"stage": "functional",
"code": "functional.output_failed_marker",
"message": "Functional output contains failure marker: TEST_FAILED. ERROR: threshold write failed.",
"retryable": false,
"details": {
"marker": "TEST_FAILED"
}
},
{
"stage": "openlane",
"code": "openlane.invalidated_by_functional_failure",
"message": "OpenLane result invalidated because functional validation failed after output-marker correction",
"retryable": false,
"details": {}
}
]
outcome{
"llm_ok": true,
"extract_ok": true,
"syntax_ok": true,
"functional_ok": false,
"openlane_ok": false,
"syntax_required": true,
"functional_required": true,
"openlane_required": true,
"final_success": false,
"success": false
}
|
| sample_9 | run_20260424_172135_562392_bd9fc2 | ok | failed | failed | skipped | failed | syntax | /data/eval/out/run_20260424_172135_562392_bd9fc2/tmp/qwen3_coder_30b/07_csr_register_map_generation__task_73/sample_9/generated.v:60: warning: Extra digits given for sized hex constant. |
Open detailssample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__07_csr_register_map_generation__task_73\samples\run_20260424_172135_562392_bd9fc2__sample_9
generated.v previewmodule apb_sample_csr (
input clk,
input rst_n,
input psel,
input penable,
input pwrite,
input [7:0] paddr,
input [31:0] pwdata,
input [3:0] pstrb,
output reg [31:0] prdata,
output reg pready,
input sample_push,
input [7:0] sample_data,
output reg [7:0] threshold,
output reg irq_out,
output reg ack_pulse
);
reg [7:0] config_reg;
reg data_pending;
reg [7:0] latched_sample;
// Register block
reg [31:0] config_data;
reg [31:0] status_data;
reg [31:0] data_data;
reg [31:0] cmd_data;
// APB handshake
reg apb_write;
reg apb_read;
...
syntax details[stderr] /data/eval/out/run_20260424_172135_562392_bd9fc2/tmp/qwen3_coder_30b/07_csr_register_map_generation__task_73/sample_9/generated.v:60: warning: Extra digits given for sized hex constant. /data/eval/out/run_20260424_172135_562392_bd9fc2/tmp/qwen3_coder_30b/07_csr_register_map_generation__task_73/sample_9/generated.v:104: syntax error /data/eval/out/run_20260424_172135_562392_bd9fc2/tmp/qwen3_coder_30b/07_csr_register_map_generation__task_73/sample_9/generated.v:108: Syntax in assignment statement l-value. /data/eval/out/run_20260424_172135_562392_bd9fc2/tmp/qwen3_coder_30b/07_csr_register_map_generation__task_73/sample_9/generated.v:107: error: Incomprehensible case expression. /data/eval/out/run_20260424_172135_562392_bd9fc2/tmp/qwen3_coder_30b/07_csr_register_map_generation__task_73/sample_9/generated.v:111: warning: Extra digits given for sized hex constant. /data/eval/out/run_20260424_172135_562392_bd9fc2/tmp/qwen3_coder_30b/07_csr_register_map_generation__task_73/sample_9/generated.v:115: syntax error I give up. functional details[stderr] task_73/sample_9/functional/generated.v:104: syntax error /data/eval/out/run_20260424_172135_562392_bd9fc2/tmp/qwen3_coder_30b/07_csr_register_map_generation__task_73/sample_9/functional/generated.v:108: Syntax in assignment statement l-value. /data/eval/out/run_20260424_172135_562392_bd9fc2/tmp/qwen3_coder_30b/07_csr_register_map_generation__task_73/sample_9/functional/generated.v:107: error: Incomprehensible case expression. /data/eval/out/run_20260424_172135_562392_bd9fc2/tmp/qwen3_coder_30b/07_csr_register_map_generation__task_73/sample_9/functional/generated.v:111: warning: Extra digits given for sized hex constant. /data/eval/out/run_20260424_172135_562392_bd9fc2/tmp/qwen3_coder_30b/07_csr_register_map_generation__task_73/sample_9/functional/generated.v:115: syntax error /workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:10: error: Malformed statement /workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:10: error: Incomprehensible case expression. /workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:11: syntax error /workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:12: error: Malformed statement /workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:12: error: Incomprehensible case expression. /workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:13: syntax error /workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:14: error: Malformed statement /workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:14: error: Incomprehensible case expression. /workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:16: syntax error /workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:16: error: Malformed statement /workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:16: error: Incomprehensible case expression. /workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:17: syntax error /workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:18: error: Malformed statement /workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:18: error: Incomprehensible case expression. /workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:19: syntax error /workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:22: error: Malformed statement /workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:22: error: Incomprehensible case expression. /workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:23: syntax error /workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:44: error: Malformed statement /workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:44: error: Incomprehensible case expression. /workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:45: syntax error /workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:45: error: Malformed statement /workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:45: error: Incomprehensible case expression. /workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:46: syntax error /workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:46: error: Malformed statement /workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:46: error: Incomprehensible case expression. ... synthesis details[error] None errors[][
{
"stage": "syntax",
"code": "syntax.iverilog_failed",
"message": "/data/eval/out/run_20260424_172135_562392_bd9fc2/tmp/qwen3_coder_30b/07_csr_register_map_generation__task_73/sample_9/generated.v:60: warning: Extra digits given for sized hex constant.\n/data/eval/out/run_20260424_172135_562392_bd9fc2/tmp/qwen3_coder_30b/07_csr_register_map_generation__task_73/sample_9/generated.v:104: syntax error\n/data/eval/out/run_20260424_172135_562392_bd9fc2/tmp/qwen3_coder_30b/07_csr_register_map_generation__task_73/sample_9/generated.v:108: Syntax in assignment statement l-value.\n/data/eval/out/run_20260424_172135_562392_bd9fc2/tmp/qwen3_coder_30b/07_csr_register_map_generation__task_73/sample_9/generated.v:107: error: Incomprehensible case expression.\n/data/eval/out/run_20260424_172135_562392_bd9fc2/tmp/qwen3_coder_30b/07_csr_register_map_generation__task_73/sample_9/generated.v:111: warning: Extra digits given for sized hex constant.\n/data/eval/out/run_20260424_172135_562392_bd9fc2/tmp/qwen3_coder_30b/07_csr_register_map_generation__task_73/sample_9/generated.v:115: syntax error\nI give up.\n",
"retryable": false,
"details": {}
},
{
"stage": "functional",
"code": "functional.testbench_failed",
"message": "task_73/sample_9/functional/generated.v:104: syntax error\n/data/eval/out/run_20260424_172135_562392_bd9fc2/tmp/qwen3_coder_30b/07_csr_register_map_generation__task_73/sample_9/functional/generated.v:108: Syntax in assignment statement l-value.\n/data/eval/out/run_20260424_172135_562392_bd9fc2/tmp/qwen3_coder_30b/07_csr_register_map_generation__task_73/sample_9/functional/generated.v:107: error: Incomprehensible case expression.\n/data/eval/out/run_20260424_172135_562392_bd9fc2/tmp/qwen3_coder_30b/07_csr_register_map_generation__task_73/sample_9/functional/generated.v:111: warning: Extra digits given for sized hex constant.\n/data/eval/out/run_20260424_172135_562392_bd9fc2/tmp/qwen3_coder_30b/07_csr_register_map_generation__task_73/sample_9/functional/generated.v:115: syntax error\n/workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:10: error: Malformed statement\n/workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:10: error: Incomprehensible case expression.\n/workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:11: syntax error\n/workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:12: error: Malformed statement\n/workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:12: error: Incomprehensible case expression.\n/workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:13: syntax error\n/workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:14: error: Malformed statement\n/workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:14: error: Incomprehensible case expression.\n/workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:16: syntax error\n/workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:16: error: Malformed statement\n/workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:16: error: Incomprehensible case expression.\n/workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:17: syntax error\n/workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:18: error: Malformed statement\n/workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:18: error: Incomprehensible case expression.\n/workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:19: syntax error\n/workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:22: error: Malformed statement\n/workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:22: error: Incomprehensible case expression.\n/workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:23: syntax error\n/workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:44: error: Malformed statement\n/workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:44: error: Incomprehensible case expression.\n/workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:45: syntax error\n/workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:45: error: Malformed statement\n/workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:45: error: Incomprehensible case expression.\n/workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:46: syntax error\n/workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:46: error: Malformed statement\n/workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:46: error: Incomprehensible case expression.\n/workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:47: syntax error\n/workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:71: error: Malformed statement\n/workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:71: error: Incomprehensible case expression.\n/workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:72: syntax error\n/work…
outcome{
"llm_ok": true,
"extract_ok": true,
"syntax_ok": false,
"functional_ok": false,
"openlane_ok": false,
"syntax_required": true,
"functional_required": true,
"openlane_required": true,
"final_success": false,
"success": false
}
|
| sample_9 | run_20260424_230145_632624_082334 | ok | ok | failed | failed | failed | functional | Functional output contains failure marker: TEST_FAILED. ERROR: threshold write failed. |
Open detailssample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__07_csr_register_map_generation__task_73\samples\run_20260424_230145_632624_082334__sample_9
generated.v previewmodule apb_sample_csr (
input clk,
input rst_n,
input psel,
input penable,
input pwrite,
input [7:0] paddr,
input [31:0] pwdata,
input [3:0] pstrb,
output reg [31:0] prdata,
output reg pready,
input sample_push,
input [7:0] sample_data,
output reg [7:0] threshold,
output reg irq_out,
output reg ack_pulse
);
reg data_pending;
reg [7:0] latched_sample;
reg [31:0] reg_config;
reg [31:0] reg_status;
reg [31:0] reg_data;
reg [31:0] reg_cmd;
reg apb_write;
reg apb_read;
reg [31:0] apb_rdata;
reg [31:0] apb_wdata;
reg [3:0] apb_strb;
reg [7:0] apb_addr;
...
functional details[stdout] ERROR: threshold write failed. ERROR: sample_push did not set data_pending. TEST_FAILED /workspace/banchmarks/pashencev/07_csr_register_map_generation/task_73/tb.v:178: $finish called at 156000 (1ps) synthesis details[error] None errors[][
{
"stage": "functional",
"code": "functional.output_failed_marker",
"message": "Functional output contains failure marker: TEST_FAILED. ERROR: threshold write failed.",
"retryable": false,
"details": {
"marker": "TEST_FAILED"
}
},
{
"stage": "openlane",
"code": "openlane.invalidated_by_functional_failure",
"message": "OpenLane result invalidated because functional validation failed after output-marker correction",
"retryable": false,
"details": {}
}
]
outcome{
"llm_ok": true,
"extract_ok": true,
"syntax_ok": true,
"functional_ok": false,
"openlane_ok": false,
"syntax_required": true,
"functional_required": true,
"openlane_required": true,
"final_success": false,
"success": false
}
|
| sample_9 | run_20260426_141859_833435_7c9834 | ok | ok | failed | failed | failed | functional | Functional output contains failure marker: TEST_FAILED. ERROR: reset values are incorrect. |
Open detailssample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__07_csr_register_map_generation__task_73\samples\run_20260426_141859_833435_7c9834__sample_9
generated.v previewmodule apb_sample_csr (
input clk,
input rst_n,
input psel,
input penable,
input pwrite,
input [7:0] paddr,
input [31:0] pwdata,
input [3:0] pstrb,
output reg [31:0] prdata,
output reg pready,
input sample_push,
input [7:0] sample_data,
output reg [7:0] threshold,
output reg irq_out,
output reg ack_pulse
);
reg data_pending;
reg [7:0] latched_sample;
reg [31:0] reg_config;
reg [31:0] reg_status;
reg [31:0] reg_data;
reg [31:0] reg_cmd;
reg write_enable;
reg read_enable;
// Sample data handling
always @(posedge clk or negedge rst_n) begin
if (!rst_n) begin
data_pending <= 1'b0;
latched_sample <= 8'h00;
...
syntax details[stderr] /data/eval/out/run_20260426_141859_833435_7c9834/tmp/qwen_coder_30/pashencev__07_csr_register_map_generation__task_73/sample_9/generated.v:95: warning: Extra digits given for sized hex constant. functional details[stdout] ERROR: reset values are incorrect. ERROR: threshold write failed. TEST_FAILED /workspace/banchmarks/pashencev/07_csr_register_map_generation/task_73/tb.v:178: $finish called at 156000 (1ps) synthesis details[error] None errors[][
{
"stage": "functional",
"code": "functional.output_failed_marker",
"message": "Functional output contains failure marker: TEST_FAILED. ERROR: reset values are incorrect.",
"retryable": false,
"details": {
"marker": "TEST_FAILED"
}
},
{
"stage": "openlane",
"code": "openlane.invalidated_by_functional_failure",
"message": "OpenLane result invalidated because functional validation failed after output-marker correction",
"retryable": false,
"details": {}
}
]
outcome{
"llm_ok": true,
"extract_ok": true,
"syntax_ok": true,
"functional_ok": false,
"openlane_ok": false,
"syntax_required": true,
"functional_required": true,
"openlane_required": true,
"final_success": false,
"success": false
}
|
| sample_10 | run_20260424_172135_562392_bd9fc2 | ok | ok | failed | failed | failed | functional | Functional output contains failure marker: TEST_FAILED. ERROR: sample_push did not set data_pending. |
Open detailssample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__07_csr_register_map_generation__task_73\samples\run_20260424_172135_562392_bd9fc2__sample_10
generated.v previewmodule apb_sample_csr (
input clk,
input rst_n,
input psel,
input penable,
input pwrite,
input [7:0] paddr,
input [31:0] pwdata,
input [3:0] pstrb,
output reg [31:0] prdata,
output reg pready,
input sample_push,
input [7:0] sample_data,
output reg [7:0] threshold,
output reg irq_out,
output reg ack_pulse
);
reg [7:0] config_reg;
reg data_pending;
reg [7:0] latched_sample;
// Register block
reg [31:0] config_data;
reg [31:0] status_data;
reg [31:0] data_data;
reg [31:0] cmd_data;
// APB state machine
reg apb_write;
reg apb_read;
...
functional details[stdout] ERROR: sample_push did not set data_pending. TEST_FAILED /workspace/banchmarks/07_csr_register_map_generation/task_73/tb.v:178: $finish called at 156000 (1ps) synthesis details[error] None errors[][
{
"stage": "functional",
"code": "functional.output_failed_marker",
"message": "Functional output contains failure marker: TEST_FAILED. ERROR: sample_push did not set data_pending.",
"retryable": false,
"details": {
"marker": "TEST_FAILED"
}
},
{
"stage": "openlane",
"code": "openlane.invalidated_by_functional_failure",
"message": "OpenLane result invalidated because functional validation failed after output-marker correction",
"retryable": false,
"details": {}
}
]
outcome{
"llm_ok": true,
"extract_ok": true,
"syntax_ok": true,
"functional_ok": false,
"openlane_ok": false,
"syntax_required": true,
"functional_required": true,
"openlane_required": true,
"final_success": false,
"success": false
}
|
| sample_10 | run_20260424_230145_632624_082334 | ok | ok | failed | failed | failed | functional | Functional output contains failure marker: TEST_FAILED. ERROR: reset values are incorrect. |
Open detailssample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__07_csr_register_map_generation__task_73\samples\run_20260424_230145_632624_082334__sample_10
generated.v previewmodule apb_sample_csr (
input clk,
input rst_n,
input psel,
input penable,
input pwrite,
input [7:0] paddr,
input [31:0] pwdata,
input [3:0] pstrb,
output reg [31:0] prdata,
output reg pready,
input sample_push,
input [7:0] sample_data,
output reg [7:0] threshold,
output reg irq_out,
output reg ack_pulse
);
reg data_pending;
reg [7:0] latched_sample;
reg ack_written;
// Register definitions
reg [31:0] CONFIG;
reg [31:0] STATUS;
reg [31:0] DATA;
reg [31:0] CMD;
// APB state machine
reg apb_write;
reg apb_read;
...
functional details[stdout] ERROR: reset values are incorrect. ERROR: threshold write failed. ERROR: STATUS readback failed. Got 00000000 ERROR: STATUS should be clear after DATA read. Got 00000020 ERROR: ack_pulse did not assert. TEST_FAILED /workspace/banchmarks/pashencev/07_csr_register_map_generation/task_73/tb.v:178: $finish called at 156000 (1ps) synthesis details[error] None errors[][
{
"stage": "functional",
"code": "functional.output_failed_marker",
"message": "Functional output contains failure marker: TEST_FAILED. ERROR: reset values are incorrect.",
"retryable": false,
"details": {
"marker": "TEST_FAILED"
}
},
{
"stage": "openlane",
"code": "openlane.invalidated_by_functional_failure",
"message": "OpenLane result invalidated because functional validation failed after output-marker correction",
"retryable": false,
"details": {}
}
]
outcome{
"llm_ok": true,
"extract_ok": true,
"syntax_ok": true,
"functional_ok": false,
"openlane_ok": false,
"syntax_required": true,
"functional_required": true,
"openlane_required": true,
"final_success": false,
"success": false
}
|
| sample_10 | run_20260426_141859_833435_7c9834 | ok | ok | failed | failed | failed | functional | Functional output contains failure marker: TEST_FAILED. ERROR: reset values are incorrect. |
Open detailssample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__07_csr_register_map_generation__task_73\samples\run_20260426_141859_833435_7c9834__sample_10
generated.v previewmodule apb_sample_csr (
input clk,
input rst_n,
input psel,
input penable,
input pwrite,
input [7:0] paddr,
input [31:0] pwdata,
input [3:0] pstrb,
output reg [31:0] prdata,
output reg pready,
input sample_push,
input [7:0] sample_data,
output reg [7:0] threshold,
output reg irq_out,
output reg ack_pulse
);
reg data_pending;
reg [7:0] latched_sample;
reg ack_written;
// Register definitions
reg [31:0] CONFIG;
reg [31:0] STATUS;
reg [31:0] DATA;
reg [31:0] CMD;
// APB state machine
reg apb_write;
reg apb_read;
...
functional details[stdout] ERROR: reset values are incorrect. ERROR: threshold write failed. ERROR: STATUS readback failed. Got 00000000 ERROR: STATUS should be clear after DATA read. Got 00000020 ERROR: ack_pulse did not assert. TEST_FAILED /workspace/banchmarks/pashencev/07_csr_register_map_generation/task_73/tb.v:178: $finish called at 156000 (1ps) synthesis details[error] None errors[][
{
"stage": "functional",
"code": "functional.output_failed_marker",
"message": "Functional output contains failure marker: TEST_FAILED. ERROR: reset values are incorrect.",
"retryable": false,
"details": {
"marker": "TEST_FAILED"
}
},
{
"stage": "openlane",
"code": "openlane.invalidated_by_functional_failure",
"message": "OpenLane result invalidated because functional validation failed after output-marker correction",
"retryable": false,
"details": {}
}
]
outcome{
"llm_ok": true,
"extract_ok": true,
"syntax_ok": true,
"functional_ok": false,
"openlane_ok": false,
"syntax_required": true,
"functional_required": true,
"openlane_required": true,
"final_success": false,
"success": false
}
|