Назад к моделям Назад к профилю модели

qwen3-coder:30b | RAG on

10_fault_tolerant_safety / task_100 | ecc_guarded_byte

benchmarkilyasov
task_idilyasov/10_fault_tolerant_safety/task_100
samples_total33
final_success_samples1
final_success_rate_samples3.0%
functional_pass_rate_samples3.0%
synth_pass_rate_samples3.0%
source_runsrun_20260424_144121_405769_1acdc5, run_20260424_172135_562392_bd9fc2, run_20260424_230145_632624_082334, run_20260426_141859_833435_7c9834

Что показывает эта страница

Здесь перечислены все реальные попытки этой модели на одной задаче. По каждой попытке можно увидеть, до какой стадии она дошла, где именно сломалась и какое сообщение об ошибке вернулось из syntax, functional или synthesis.

Samples

sample run extract_ok syntax_ok functional_ok openlane_ok final_success failure_stage failure_reason details
sample_1 run_20260424_144121_405769_1acdc5 ok ok ok ok ok success Full pipeline success
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__10_fault_tolerant_safety__task_100\samples\run_20260424_144121_405769_1acdc5__sample_1
generated.v preview 
module ecc_guarded_byte(
    input clk,
    input rst_n,
    input write_en,
    input read_en,
    input [7:0] data_in,
    input inject_single_fault,
    input inject_double_fault,
    output reg [7:0] data_out,
    output reg data_valid,
    output reg correctable_error,
    output reg uncorrectable_error,
    output reg fault_sticky
);

reg [12:0] stored_codeword;
reg [7:0] stored_data;
reg read_pending;
reg [12:0] read_codeword;
reg [12:0] injected_codeword;
reg [12:0] corrected_codeword;
reg [12:0] syndrome;
reg single_bit_error;
reg double_bit_error;
reg [3:0] error_position;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        stored_codeword <= 13'h000;
        stored_data <= 8'h00;
        read_pending <= 1'b0;
        data_out <= 8'h00;
...
synthesis details 
[error]
None
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": true,
  "openlane_ok": true,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": true,
  "success": true
}
sample_1 run_20260424_172135_562392_bd9fc2 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (clean read): data_out=00 expected=a5
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__10_fault_tolerant_safety__task_100\samples\run_20260424_172135_562392_bd9fc2__sample_1
generated.v preview 
module ecc_guarded_byte (
    input clk,
    input rst_n,
    input write_en,
    input read_en,
    input [7:0] data_in,
    input inject_single_fault,
    input inject_double_fault,
    output reg [7:0] data_out,
    output reg data_valid,
    output reg correctable_error,
    output reg uncorrectable_error,
    output reg fault_sticky
);

reg [12:0] stored_codeword;
reg [7:0] stored_data;
reg read_pending;
reg [12:0] read_codeword;
reg [12:0] injected_codeword;
reg [12:0] corrected_codeword;
reg [12:0] syndrome;
reg single_bit_error;
reg double_bit_error;
reg [3:0] error_position;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        stored_codeword <= 13'h000;
        stored_data <= 8'h00;
        read_pending <= 1'b0;
        data_out <= 8'h00;
...
functional details 
[stdout]
ERROR (clean read): data_out=00 expected=a5
ERROR (clean read): data_valid=0 expected=1
ERROR (clean read pulse clear): data_out=a5 expected=00
ERROR (clean read pulse clear): data_valid=1 expected=0
ERROR (single fault corrected): correctable_error=0 expected=1
ERROR (single fault corrected): fault_sticky=0 expected=1
ERROR (sticky after single fault): data_out=a5 expected=00
ERROR (sticky after single fault): data_valid=1 expected=0
ERROR (sticky after single fault): fault_sticky=0 expected=1
ERROR (double fault priority): data_valid=0 expected=1
ERROR (double fault priority): uncorrectable_error=0 expected=1
ERROR (double fault priority): fault_sticky=0 expected=1
ERROR (sticky after double fault): data_out=3c expected=00
ERROR (sticky after double fault): data_valid=1 expected=0
ERROR (sticky after double fault): fault_sticky=0 expected=1
ERROR (stored data preserved): fault_sticky=0 expected=1
ERROR (storage cleared by reset): data_valid=0 expected=1
TEST_FAILED
/workspace/banchmarks/10_fault_tolerant_safety/task_100/tb.v:176: $finish called at 136000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (clean read): data_out=00 expected=a5",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_1 run_20260424_230145_632624_082334 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (clean read): data_out=00 expected=a5
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__10_fault_tolerant_safety__task_100\samples\run_20260424_230145_632624_082334__sample_1
generated.v preview 
module ecc_guarded_byte(
    input clk,
    input rst_n,
    input write_en,
    input read_en,
    input [7:0] data_in,
    input inject_single_fault,
    input inject_double_fault,
    output reg [7:0] data_out,
    output reg data_valid,
    output reg correctable_error,
    output reg uncorrectable_error,
    output reg fault_sticky
);

reg [7:0] stored_data;
reg [12:0] stored_codeword;
reg read_pending;
reg [12:0] read_codeword;
reg [12:0] injected_codeword;
reg [12:0] corrected_codeword;
reg single_bit_error;
reg double_bit_error;
reg [3:0] syndrome;

// SECDED ECC parameters for 8-bit data
// 8 data bits + 5 ECC bits = 13 bits total
// Syndrome calculation for error detection/correction

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        stored_data <= 8'h00;
...
functional details 
[stdout]
ERROR (clean read): data_out=00 expected=a5
ERROR (clean read): uncorrectable_error=1 expected=0
ERROR (clean read): fault_sticky=1 expected=0
ERROR (clean read pulse clear): fault_sticky=1 expected=0
ERROR (single fault corrected): correctable_error=0 expected=1
ERROR (stored data preserved): data_out=00 expected=3c
ERROR (stored data preserved): uncorrectable_error=1 expected=0
TEST_FAILED
/workspace/banchmarks/pashencev/10_fault_tolerant_safety/task_100/tb.v:176: $finish called at 136000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (clean read): data_out=00 expected=a5",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_1 run_20260426_141859_833435_7c9834 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (clean read): data_out=00 expected=a5
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__10_fault_tolerant_safety__task_100\samples\run_20260426_141859_833435_7c9834__sample_1
generated.v preview 
module ecc_guarded_byte (
    input clk,
    input rst_n,
    input write_en,
    input read_en,
    input [7:0] data_in,
    input inject_single_fault,
    input inject_double_fault,
    output reg [7:0] data_out,
    output reg data_valid,
    output reg correctable_error,
    output reg uncorrectable_error,
    output reg fault_sticky
);

reg [12:0] stored_codeword;
reg [7:0] stored_data;
reg read_pending;
reg [12:0] read_codeword;
reg [12:0] injected_codeword;
reg [12:0] corrected_codeword;
reg [12:0] syndrome;
reg single_bit_error;
reg double_bit_error;
reg [3:0] error_position;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        stored_codeword <= 13'h000;
        stored_data <= 8'h00;
        read_pending <= 1'b0;
        data_out <= 8'h00;
...
functional details 
[stdout]
ERROR (clean read): data_out=00 expected=a5
ERROR (clean read): data_valid=0 expected=1
ERROR (clean read pulse clear): data_out=a5 expected=00
ERROR (clean read pulse clear): data_valid=1 expected=0
ERROR (single fault corrected): data_valid=0 expected=1
ERROR (single fault corrected): correctable_error=0 expected=1
ERROR (single fault corrected): fault_sticky=0 expected=1
ERROR (sticky after single fault): data_valid=1 expected=0
ERROR (sticky after single fault): uncorrectable_error=1 expected=0
ERROR (double fault priority): data_valid=0 expected=1
ERROR (double fault priority): uncorrectable_error=0 expected=1
ERROR (double fault priority): fault_sticky=0 expected=1
ERROR (sticky after double fault): data_valid=1 expected=0
ERROR (sticky after double fault): uncorrectable_error=1 expected=0
ERROR (stored data preserved): data_out=00 expected=3c
ERROR (stored data preserved): data_valid=0 expected=1
ERROR (storage cleared by reset): data_valid=0 expected=1
TEST_FAILED
/workspace/banchmarks/pashencev/10_fault_tolerant_safety/task_100/tb.v:176: $finish called at 136000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (clean read): data_out=00 expected=a5",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_2 run_20260424_144121_405769_1acdc5 failed failed failed skipped failed extract Model response is empty
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__10_fault_tolerant_safety__task_100\samples\run_20260424_144121_405769_1acdc5__sample_2
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "model_request",
    "code": "model_request.failed",
    "message": "HTTPConnectionPool(host='ollama', port=11434): Read timed out. (read timeout=120)",
    "retryable": true,
    "details": {}
  },
  {
    "stage": "extract",
    "code": "extract.no_verilog_found",
    "message": "Model response is empty",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": false,
  "extract_ok": false,
  "syntax_ok": false,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_2 run_20260424_172135_562392_bd9fc2 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (clean read): data_out=00 expected=a5
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__10_fault_tolerant_safety__task_100\samples\run_20260424_172135_562392_bd9fc2__sample_2
generated.v preview 
module ecc_guarded_byte(
    input clk,
    input rst_n,
    input write_en,
    input read_en,
    input [7:0] data_in,
    input inject_single_fault,
    input inject_double_fault,
    output reg [7:0] data_out,
    output reg data_valid,
    output reg correctable_error,
    output reg uncorrectable_error,
    output reg fault_sticky
);

    // SECDED ECC for 8-bit data (12-bit codeword)
    reg [11:0] stored_codeword;
    reg [11:0] read_codeword;
    reg [7:0] stored_data;
    
    // State tracking
    reg read_pending;
    reg write_pending;
    
    // Error detection and correction
    wire [3:0] syndrome;
    wire single_error;
    wire double_error;
    wire [7:0] corrected_data;
    
    // ECC generation and checking
    assign syndrome = {read_codeword[11], read_codeword[10] ^ read_codeword[9] ^ read_codeword[8] ^ read_codeword[7] ^ read_codeword[6] ^ read_codeword[5] ^ read_codeword[4] ^ read_codeword[3] ^ read_codeword[2] ^ read_codeword[1] ^ read_codeword[0],
...
functional details 
[stdout]
ERROR (clean read): data_out=00 expected=a5
ERROR (clean read): data_valid=0 expected=1
ERROR (clean read pulse clear): data_out=a5 expected=00
ERROR (clean read pulse clear): data_valid=1 expected=0
ERROR (single fault corrected): data_out=00 expected=a5
ERROR (single fault corrected): data_valid=0 expected=1
ERROR (single fault corrected): correctable_error=0 expected=1
ERROR (single fault corrected): fault_sticky=0 expected=1
ERROR (sticky after single fault): data_out=a5 expected=00
ERROR (sticky after single fault): data_valid=1 expected=0
ERROR (sticky after single fault): fault_sticky=0 expected=1
ERROR (double fault priority): data_valid=0 expected=1
ERROR (double fault priority): uncorrectable_error=0 expected=1
ERROR (double fault priority): fault_sticky=0 expected=1
ERROR (sticky after double fault): data_out=3c expected=00
ERROR (sticky after double fault): data_valid=1 expected=0
ERROR (sticky after double fault): fault_sticky=0 expected=1
ERROR (stored data preserved): data_out=00 expected=3c
ERROR (stored data preserved): data_valid=0 expected=1
ERROR (stored data preserved): fault_sticky=0 expected=1
ERROR (storage cleared by reset): data_valid=0 expected=1
TEST_FAILED
/workspace/banchmarks/10_fault_tolerant_safety/task_100/tb.v:176: $finish called at 136000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (clean read): data_out=00 expected=a5",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_2 run_20260424_230145_632624_082334 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (clean read): data_out=00 expected=a5
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__10_fault_tolerant_safety__task_100\samples\run_20260424_230145_632624_082334__sample_2
generated.v preview 
module ecc_guarded_byte(
    input clk,
    input rst_n,
    input write_en,
    input read_en,
    input [7:0] data_in,
    input inject_single_fault,
    input inject_double_fault,
    output reg [7:0] data_out,
    output reg data_valid,
    output reg correctable_error,
    output reg uncorrectable_error,
    output reg fault_sticky
);

    // SECDED ECC for 8-bit data (12-bit codeword)
    reg [11:0] stored_codeword;
    reg [11:0] read_codeword;
    reg [7:0] stored_data;
    
    // State tracking
    reg write_cycle;
    reg read_cycle;
    
    // Error detection and correction
    wire [3:0] syndrome;
    wire single_error;
    wire double_error;
    wire [7:0] corrected_data;
    
    // ECC generation and checking
    assign syndrome = {read_codeword[11], read_codeword[10], read_codeword[9], read_codeword[8]} ^
...
functional details 
[stdout]
ERROR (clean read): data_out=00 expected=a5
ERROR (clean read): data_valid=0 expected=1
ERROR (clean read pulse clear): data_out=51 expected=00
ERROR (clean read pulse clear): data_valid=1 expected=0
ERROR (clean read pulse clear): correctable_error=1 expected=0
ERROR (clean read pulse clear): fault_sticky=1 expected=0
ERROR (single fault corrected): data_out=51 expected=a5
ERROR (single fault corrected): data_valid=0 expected=1
ERROR (single fault corrected): correctable_error=0 expected=1
ERROR (sticky after single fault): data_out=51 expected=00
ERROR (sticky after single fault): data_valid=1 expected=0
ERROR (sticky after single fault): correctable_error=1 expected=0
ERROR (double fault priority): data_valid=0 expected=1
ERROR (double fault priority): uncorrectable_error=0 expected=1
ERROR (double fault priority): fault_sticky=0 expected=1
ERROR (sticky after double fault): data_out=c1 expected=00
ERROR (sticky after double fault): data_valid=1 expected=0
ERROR (sticky after double fault): correctable_error=1 expected=0
ERROR (stored data preserved): data_out=c1 expected=3c
ERROR (stored data preserved): data_valid=0 expected=1
ERROR (storage cleared by reset): data_valid=0 expected=1
TEST_FAILED
/workspace/banchmarks/pashencev/10_fault_tolerant_safety/task_100/tb.v:176: $finish called at 136000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (clean read): data_out=00 expected=a5",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_2 run_20260426_141859_833435_7c9834 failed failed failed skipped failed extract Model response is empty
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__10_fault_tolerant_safety__task_100\samples\run_20260426_141859_833435_7c9834__sample_2
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "model_request",
    "code": "model_request.failed",
    "message": "HTTPConnectionPool(host='ollama', port=11434): Read timed out. (read timeout=120)",
    "retryable": true,
    "details": {}
  },
  {
    "stage": "extract",
    "code": "extract.no_verilog_found",
    "message": "Model response is empty",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": false,
  "extract_ok": false,
  "syntax_ok": false,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_3 run_20260424_144121_405769_1acdc5 failed failed failed skipped failed extract Model response is empty
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__10_fault_tolerant_safety__task_100\samples\run_20260424_144121_405769_1acdc5__sample_3
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "model_request",
    "code": "model_request.failed",
    "message": "HTTPConnectionPool(host='ollama', port=11434): Read timed out. (read timeout=120)",
    "retryable": true,
    "details": {}
  },
  {
    "stage": "extract",
    "code": "extract.no_verilog_found",
    "message": "Model response is empty",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": false,
  "extract_ok": false,
  "syntax_ok": false,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_3 run_20260424_172135_562392_bd9fc2 failed failed failed skipped failed extract Model response is empty
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__10_fault_tolerant_safety__task_100\samples\run_20260424_172135_562392_bd9fc2__sample_3
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "model_request",
    "code": "model_request.failed",
    "message": "HTTPConnectionPool(host='ollama', port=11434): Read timed out. (read timeout=120)",
    "retryable": true,
    "details": {}
  },
  {
    "stage": "extract",
    "code": "extract.no_verilog_found",
    "message": "Model response is empty",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": false,
  "extract_ok": false,
  "syntax_ok": false,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_3 run_20260424_230145_632624_082334 ok failed failed skipped failed syntax /data/eval/out/run_20260424_230145_632624_082334/tmp/qwen3_coder_30b/pashencev__10_fault_tolerant_safety__task_100/sample_3/generated.v:311: error: 'ecc_module' has already been declared in this scope.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__10_fault_tolerant_safety__task_100\samples\run_20260424_230145_632624_082334__sample_3
generated.v preview 
module ecc_guarded_byte(
    input clk,
    input rst_n,
    input write_en,
    input read_en,
    input [7:0] data_in,
    input inject_single_fault,
    input inject_double_fault,
    output reg [7:0] data_out,
    output reg data_valid,
    output reg correctable_error,
    output reg uncorrectable_error,
    output reg fault_sticky
);

    // SECDED ECC for 8-bit data (12-bit codeword)
    reg [11:0] stored_codeword;
    reg [11:0] read_codeword;
    reg [7:0] stored_data;
    
    // Internal signals
    reg [11:0] write_codeword;
    reg [11:0] injected_codeword;
    reg [3:0] syndrome;
    reg single_bit_error;
    reg double_bit_error;
    reg [7:0] corrected_data;
    
    // Helper function to compute parity
    function [3:0] compute_syndrome;
        input [11:0] codeword;
        begin
...
syntax details 
[stderr]
/data/eval/out/run_20260424_230145_632624_082334/tmp/qwen3_coder_30b/pashencev__10_fault_tolerant_safety__task_100/sample_3/generated.v:311: error: 'ecc_module' has already been declared in this scope.
/data/eval/out/run_20260424_230145_632624_082334/tmp/qwen3_coder_30b/pashencev__10_fault_tolerant_safety__task_100/sample_3/generated.v:183:      : It was declared here as a module.
/data/eval/out/run_20260424_230145_632624_082334/tmp/qwen3_coder_30b/pashencev__10_fault_tolerant_safety__task_100/sample_3/generated.v:436: error: Module ecc_module was already declared here: /data/eval/out/run_20260424_230145_632624_082334/tmp/qwen3_coder_30b/pashencev__10_fault_tolerant_safety__task_100/sample_3/generated.v:183

/data/eval/out/run_20260424_230145_632624_082334/tmp/qwen3_coder_30b/pashencev__10_fault_tolerant_safety__task_100/sample_3/generated.v:439: error: 'ecc_module' has already been declared in this scope.
/data/eval/out/run_20260424_230145_632624_082334/tmp/qwen3_coder_30b/pashencev__10_fault_tolerant_safety__task_100/sample_3/generated.v:183:      : It was declared here as a module.
/data/eval/out/run_20260424_230145_632624_082334/tmp/qwen3_coder_30b/pashencev__10_fault_tolerant_safety__task_100/sample_3/generated.v:564: error: Module ecc_module was already declared here: /data/eval/out/run_20260424_230145_632624_082334/tmp/qwen3_coder_30b/pashencev__10_fault_tolerant_safety__task_100/sample_3/generated.v:183
functional details 
[stderr]
/data/eval/out/run_20260424_230145_632624_082334/tmp/qwen3_coder_30b/pashencev__10_fault_tolerant_safety__task_100/sample_3/functional/generated.v:311: error: 'ecc_module' has already been declared in this scope.
/data/eval/out/run_20260424_230145_632624_082334/tmp/qwen3_coder_30b/pashencev__10_fault_tolerant_safety__task_100/sample_3/functional/generated.v:183:      : It was declared here as a module.
/data/eval/out/run_20260424_230145_632624_082334/tmp/qwen3_coder_30b/pashencev__10_fault_tolerant_safety__task_100/sample_3/functional/generated.v:436: error: Module ecc_module was already declared here: /data/eval/out/run_20260424_230145_632624_082334/tmp/qwen3_coder_30b/pashencev__10_fault_tolerant_safety__task_100/sample_3/functional/generated.v:183

/data/eval/out/run_20260424_230145_632624_082334/tmp/qwen3_coder_30b/pashencev__10_fault_tolerant_safety__task_100/sample_3/functional/generated.v:439: error: 'ecc_module' has already been declared in this scope.
/data/eval/out/run_20260424_230145_632624_082334/tmp/qwen3_coder_30b/pashencev__10_fault_tolerant_safety__task_100/sample_3/functional/generated.v:183:      : It was declared here as a module.
/data/eval/out/run_20260424_230145_632624_082334/tmp/qwen3_coder_30b/pashencev__10_fault_tolerant_safety__task_100/sample_3/functional/generated.v:564: error: Module ecc_module was already declared here: /data/eval/out/run_20260424_230145_632624_082334/tmp/qwen3_coder_30b/pashencev__10_fault_tolerant_safety__task_100/sample_3/functional/generated.v:183
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "syntax",
    "code": "syntax.iverilog_failed",
    "message": "/data/eval/out/run_20260424_230145_632624_082334/tmp/qwen3_coder_30b/pashencev__10_fault_tolerant_safety__task_100/sample_3/generated.v:311: error: 'ecc_module' has already been declared in this scope.\n/data/eval/out/run_20260424_230145_632624_082334/tmp/qwen3_coder_30b/pashencev__10_fault_tolerant_safety__task_100/sample_3/generated.v:183:      : It was declared here as a module.\n/data/eval/out/run_20260424_230145_632624_082334/tmp/qwen3_coder_30b/pashencev__10_fault_tolerant_safety__task_100/sample_3/generated.v:436: error: Module ecc_module was already declared here: /data/eval/out/run_20260424_230145_632624_082334/tmp/qwen3_coder_30b/pashencev__10_fault_tolerant_safety__task_100/sample_3/generated.v:183\n\n/data/eval/out/run_20260424_230145_632624_082334/tmp/qwen3_coder_30b/pashencev__10_fault_tolerant_safety__task_100/sample_3/generated.v:439: error: 'ecc_module' has already been declared in this scope.\n/data/eval/out/run_20260424_230145_632624_082334/tmp/qwen3_coder_30b/pashencev__10_fault_tolerant_safety__task_100/sample_3/generated.v:183:      : It was declared here as a module.\n/data/eval/out/run_20260424_230145_632624_082334/tmp/qwen3_coder_30b/pashencev__10_fault_tolerant_safety__task_100/sample_3/generated.v:564: error: Module ecc_module was already declared here: /data/eval/out/run_20260424_230145_632624_082334/tmp/qwen3_coder_30b/pashencev__10_fault_tolerant_safety__task_100/sample_3/generated.v:183\n\n",
    "retryable": false,
    "details": {}
  },
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/data/eval/out/run_20260424_230145_632624_082334/tmp/qwen3_coder_30b/pashencev__10_fault_tolerant_safety__task_100/sample_3/functional/generated.v:311: error: 'ecc_module' has already been declared in this scope.\n/data/eval/out/run_20260424_230145_632624_082334/tmp/qwen3_coder_30b/pashencev__10_fault_tolerant_safety__task_100/sample_3/functional/generated.v:183:      : It was declared here as a module.\n/data/eval/out/run_20260424_230145_632624_082334/tmp/qwen3_coder_30b/pashencev__10_fault_tolerant_safety__task_100/sample_3/functional/generated.v:436: error: Module ecc_module was already declared here: /data/eval/out/run_20260424_230145_632624_082334/tmp/qwen3_coder_30b/pashencev__10_fault_tolerant_safety__task_100/sample_3/functional/generated.v:183\n\n/data/eval/out/run_20260424_230145_632624_082334/tmp/qwen3_coder_30b/pashencev__10_fault_tolerant_safety__task_100/sample_3/functional/generated.v:439: error: 'ecc_module' has already been declared in this scope.\n/data/eval/out/run_20260424_230145_632624_082334/tmp/qwen3_coder_30b/pashencev__10_fault_tolerant_safety__task_100/sample_3/functional/generated.v:183:      : It was declared here as a module.\n/data/eval/out/run_20260424_230145_632624_082334/tmp/qwen3_coder_30b/pashencev__10_fault_tolerant_safety__task_100/sample_3/functional/generated.v:564: error: Module ecc_module was already declared here: /data/eval/out/run_20260424_230145_632624_082334/tmp/qwen3_coder_30b/pashencev__10_fault_tolerant_safety__task_100/sample_3/functional/generated.v:183\n\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": false,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_3 run_20260426_141859_833435_7c9834 failed failed failed skipped failed extract Model response is empty
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__10_fault_tolerant_safety__task_100\samples\run_20260426_141859_833435_7c9834__sample_3
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "model_request",
    "code": "model_request.failed",
    "message": "HTTPConnectionPool(host='ollama', port=11434): Read timed out. (read timeout=120)",
    "retryable": true,
    "details": {}
  },
  {
    "stage": "extract",
    "code": "extract.no_verilog_found",
    "message": "Model response is empty",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": false,
  "extract_ok": false,
  "syntax_ok": false,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_4 run_20260424_172135_562392_bd9fc2 failed failed failed skipped failed extract Model response is empty
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__10_fault_tolerant_safety__task_100\samples\run_20260424_172135_562392_bd9fc2__sample_4
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "model_request",
    "code": "model_request.failed",
    "message": "HTTPConnectionPool(host='ollama', port=11434): Read timed out. (read timeout=120)",
    "retryable": true,
    "details": {}
  },
  {
    "stage": "extract",
    "code": "extract.no_verilog_found",
    "message": "Model response is empty",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": false,
  "extract_ok": false,
  "syntax_ok": false,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_4 run_20260424_230145_632624_082334 failed failed failed skipped failed extract Model response is empty
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__10_fault_tolerant_safety__task_100\samples\run_20260424_230145_632624_082334__sample_4
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "model_request",
    "code": "model_request.failed",
    "message": "HTTPConnectionPool(host='ollama', port=11434): Read timed out. (read timeout=120)",
    "retryable": true,
    "details": {}
  },
  {
    "stage": "extract",
    "code": "extract.no_verilog_found",
    "message": "Model response is empty",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": false,
  "extract_ok": false,
  "syntax_ok": false,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_4 run_20260426_141859_833435_7c9834 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (clean read): data_out=00 expected=a5
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__10_fault_tolerant_safety__task_100\samples\run_20260426_141859_833435_7c9834__sample_4
generated.v preview 
module ecc_guarded_byte (
    input clk,
    input rst_n,
    input write_en,
    input read_en,
    input [7:0] data_in,
    input inject_single_fault,
    input inject_double_fault,
    output reg [7:0] data_out,
    output reg data_valid,
    output reg correctable_error,
    output reg uncorrectable_error,
    output reg fault_sticky
);

reg [12:0] stored_codeword;
reg [7:0] stored_data;
reg read_pending;
reg [12:0] read_codeword;
reg [12:0] injected_codeword;
reg [12:0] corrected_codeword;
reg [12:0] syndrome;
reg single_error;
reg double_error;
reg [3:0] error_position;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        stored_codeword <= 13'h000;
        stored_data <= 8'h00;
        read_pending <= 1'b0;
        data_out <= 8'h00;
...
functional details 
[stdout]
ERROR (clean read): data_out=00 expected=a5
ERROR (clean read): data_valid=0 expected=1
ERROR (clean read pulse clear): data_out=a5 expected=00
ERROR (clean read pulse clear): data_valid=1 expected=0
ERROR (single fault corrected): data_valid=0 expected=1
ERROR (single fault corrected): correctable_error=0 expected=1
ERROR (single fault corrected): fault_sticky=0 expected=1
ERROR (sticky after single fault): data_out=a5 expected=00
ERROR (sticky after single fault): data_valid=1 expected=0
ERROR (sticky after single fault): fault_sticky=0 expected=1
ERROR (double fault priority): uncorrectable_error=0 expected=1
ERROR (double fault priority): fault_sticky=0 expected=1
ERROR (sticky after double fault): fault_sticky=0 expected=1
ERROR (stored data preserved): data_out=00 expected=3c
ERROR (stored data preserved): data_valid=0 expected=1
ERROR (stored data preserved): fault_sticky=0 expected=1
ERROR (storage cleared by reset): data_valid=0 expected=1
TEST_FAILED
/workspace/banchmarks/pashencev/10_fault_tolerant_safety/task_100/tb.v:176: $finish called at 136000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (clean read): data_out=00 expected=a5",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_5 run_20260424_172135_562392_bd9fc2 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (clean read): data_out=00 expected=a5
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__10_fault_tolerant_safety__task_100\samples\run_20260424_172135_562392_bd9fc2__sample_5
generated.v preview 
module ecc_guarded_byte(
    input clk,
    input rst_n,
    input write_en,
    input read_en,
    input [7:0] data_in,
    input inject_single_fault,
    input inject_double_fault,
    output reg [7:0] data_out,
    output reg data_valid,
    output reg correctable_error,
    output reg uncorrectable_error,
    output reg fault_sticky
);

reg [7:0] stored_data;
reg [12:0] stored_codeword;
reg [12:0] read_codeword;
reg read_pending;
reg write_pending;
reg [12:0] injected_codeword;
reg single_fault_injected;
reg double_fault_injected;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        stored_data <= 8'h00;
        stored_codeword <= 13'h000;
        data_out <= 8'h00;
        data_valid <= 1'b0;
        correctable_error <= 1'b0;
        uncorrectable_error <= 1'b0;
...
functional details 
[stdout]
ERROR (clean read): data_out=00 expected=a5
ERROR (clean read): data_valid=0 expected=1
ERROR (clean read pulse clear): data_out=a5 expected=00
ERROR (clean read pulse clear): data_valid=1 expected=0
ERROR (single fault corrected): data_valid=0 expected=1
ERROR (single fault corrected): correctable_error=0 expected=1
ERROR (single fault corrected): fault_sticky=0 expected=1
ERROR (sticky after single fault): data_out=a5 expected=00
ERROR (sticky after single fault): data_valid=1 expected=0
ERROR (sticky after single fault): fault_sticky=0 expected=1
ERROR (double fault priority): data_valid=0 expected=1
ERROR (double fault priority): uncorrectable_error=0 expected=1
ERROR (double fault priority): fault_sticky=0 expected=1
ERROR (sticky after double fault): data_out=3c expected=00
ERROR (sticky after double fault): data_valid=1 expected=0
ERROR (sticky after double fault): fault_sticky=0 expected=1
ERROR (stored data preserved): data_valid=0 expected=1
ERROR (stored data preserved): fault_sticky=0 expected=1
ERROR (storage cleared by reset): data_valid=0 expected=1
TEST_FAILED
/workspace/banchmarks/10_fault_tolerant_safety/task_100/tb.v:176: $finish called at 136000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (clean read): data_out=00 expected=a5",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_5 run_20260424_230145_632624_082334 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (clean read): data_out=00 expected=a5
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__10_fault_tolerant_safety__task_100\samples\run_20260424_230145_632624_082334__sample_5
generated.v preview 
module ecc_guarded_byte (
    input clk,
    input rst_n,
    input write_en,
    input read_en,
    input [7:0] data_in,
    input inject_single_fault,
    input inject_double_fault,
    output reg [7:0] data_out,
    output reg data_valid,
    output reg correctable_error,
    output reg uncorrectable_error,
    output reg fault_sticky
);

reg [12:0] stored_codeword;
reg [7:0] stored_data;
reg read_pending;
reg [12:0] read_codeword;
reg [12:0] injected_codeword;
reg [12:0] corrected_codeword;
reg single_fault_detected;
reg double_fault_detected;
reg [12:0] syndrome;
reg [3:0] syndrome_bits;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        stored_codeword <= 13'h000;
        stored_data <= 8'h00;
        read_pending <= 1'b0;
        data_out <= 8'h00;
...
functional details 
[stdout]
ERROR (clean read): data_out=00 expected=a5
ERROR (clean read): data_valid=0 expected=1
ERROR (clean read pulse clear): data_out=a5 expected=00
ERROR (clean read pulse clear): data_valid=1 expected=0
ERROR (single fault corrected): data_out=00 expected=a5
ERROR (single fault corrected): data_valid=0 expected=1
ERROR (single fault corrected): correctable_error=0 expected=1
ERROR (single fault corrected): fault_sticky=0 expected=1
ERROR (sticky after single fault): data_out=a5 expected=00
ERROR (sticky after single fault): data_valid=1 expected=0
ERROR (sticky after single fault): fault_sticky=0 expected=1
ERROR (double fault priority): data_valid=0 expected=1
ERROR (double fault priority): uncorrectable_error=0 expected=1
ERROR (double fault priority): fault_sticky=0 expected=1
ERROR (sticky after double fault): data_out=3c expected=00
ERROR (sticky after double fault): data_valid=1 expected=0
ERROR (sticky after double fault): fault_sticky=0 expected=1
ERROR (stored data preserved): data_out=00 expected=3c
ERROR (stored data preserved): data_valid=0 expected=1
ERROR (stored data preserved): fault_sticky=0 expected=1
ERROR (storage cleared by reset): data_valid=0 expected=1
TEST_FAILED
/workspace/banchmarks/pashencev/10_fault_tolerant_safety/task_100/tb.v:176: $finish called at 136000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (clean read): data_out=00 expected=a5",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_5 run_20260426_141859_833435_7c9834 failed failed failed skipped failed extract Model response is empty
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__10_fault_tolerant_safety__task_100\samples\run_20260426_141859_833435_7c9834__sample_5
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "model_request",
    "code": "model_request.failed",
    "message": "HTTPConnectionPool(host='ollama', port=11434): Read timed out. (read timeout=120)",
    "retryable": true,
    "details": {}
  },
  {
    "stage": "extract",
    "code": "extract.no_verilog_found",
    "message": "Model response is empty",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": false,
  "extract_ok": false,
  "syntax_ok": false,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_6 run_20260424_172135_562392_bd9fc2 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (clean read): data_out=00 expected=a5
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__10_fault_tolerant_safety__task_100\samples\run_20260424_172135_562392_bd9fc2__sample_6
generated.v preview 
module ecc_guarded_byte (
    input clk,
    input rst_n,
    input write_en,
    input read_en,
    input [7:0] data_in,
    input inject_single_fault,
    input inject_double_fault,
    output reg [7:0] data_out,
    output reg data_valid,
    output reg correctable_error,
    output reg uncorrectable_error,
    output reg fault_sticky
);

reg [12:0] stored_codeword;
reg [7:0] stored_data;
reg write_pending;
reg read_pending;
reg [12:0] read_codeword;
reg [12:0] injected_codeword;
reg single_fault_injected;
reg double_fault_injected;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        stored_codeword <= 13'h000;
        stored_data <= 8'h00;
        write_pending <= 1'b0;
        read_pending <= 1'b0;
        data_out <= 8'h00;
        data_valid <= 1'b0;
...
functional details 
[stdout]
ERROR (clean read): data_out=00 expected=a5
ERROR (clean read): data_valid=0 expected=1
ERROR (clean read pulse clear): data_out=xx expected=00
ERROR (clean read pulse clear): data_valid=1 expected=0
ERROR (single fault corrected): data_out=xx expected=a5
ERROR (single fault corrected): data_valid=0 expected=1
ERROR (single fault corrected): correctable_error=0 expected=1
ERROR (single fault corrected): fault_sticky=0 expected=1
ERROR (sticky after single fault): data_out=xx expected=00
ERROR (sticky after single fault): data_valid=1 expected=0
ERROR (sticky after single fault): fault_sticky=0 expected=1
ERROR (double fault priority): data_valid=0 expected=1
ERROR (double fault priority): uncorrectable_error=0 expected=1
ERROR (double fault priority): fault_sticky=0 expected=1
ERROR (sticky after double fault): data_valid=1 expected=0
ERROR (sticky after double fault): uncorrectable_error=1 expected=0
ERROR (stored data preserved): data_out=00 expected=3c
ERROR (stored data preserved): data_valid=0 expected=1
ERROR (stored data preserved): uncorrectable_error=1 expected=0
ERROR (storage cleared by reset): data_valid=0 expected=1
TEST_FAILED
/workspace/banchmarks/10_fault_tolerant_safety/task_100/tb.v:176: $finish called at 136000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (clean read): data_out=00 expected=a5",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_6 run_20260424_230145_632624_082334 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (clean read): data_out=00 expected=a5
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__10_fault_tolerant_safety__task_100\samples\run_20260424_230145_632624_082334__sample_6
generated.v preview 
module ecc_guarded_byte (
    input clk,
    input rst_n,
    input write_en,
    input read_en,
    input [7:0] data_in,
    input inject_single_fault,
    input inject_double_fault,
    output reg [7:0] data_out,
    output reg data_valid,
    output reg correctable_error,
    output reg uncorrectable_error,
    output reg fault_sticky
);

reg [12:0] stored_codeword;
reg [7:0] stored_data;
reg read_pending;
reg [12:0] read_codeword;
reg [12:0] injected_codeword;
reg [12:0] corrected_codeword;
reg [12:0] syndrome;
reg single_error;
reg double_error;
reg [3:0] error_position;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        stored_codeword <= 13'h000;
        stored_data <= 8'h00;
        read_pending <= 1'b0;
        data_out <= 8'h00;
...
functional details 
[stdout]
ERROR (clean read): data_out=00 expected=a5
ERROR (clean read): data_valid=0 expected=1
ERROR (clean read pulse clear): data_out=a5 expected=00
ERROR (clean read pulse clear): data_valid=1 expected=0
ERROR (single fault corrected): data_valid=0 expected=1
ERROR (single fault corrected): correctable_error=0 expected=1
ERROR (single fault corrected): fault_sticky=0 expected=1
ERROR (sticky after single fault): data_out=a5 expected=00
ERROR (sticky after single fault): data_valid=1 expected=0
ERROR (sticky after single fault): fault_sticky=0 expected=1
ERROR (double fault priority): data_valid=0 expected=1
ERROR (double fault priority): uncorrectable_error=0 expected=1
ERROR (double fault priority): fault_sticky=0 expected=1
ERROR (sticky after double fault): data_valid=1 expected=0
ERROR (sticky after double fault): fault_sticky=0 expected=1
ERROR (stored data preserved): data_out=00 expected=3c
ERROR (stored data preserved): data_valid=0 expected=1
ERROR (stored data preserved): fault_sticky=0 expected=1
ERROR (storage cleared by reset): data_valid=0 expected=1
TEST_FAILED
/workspace/banchmarks/pashencev/10_fault_tolerant_safety/task_100/tb.v:176: $finish called at 136000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (clean read): data_out=00 expected=a5",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_6 run_20260426_141859_833435_7c9834 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (async reset): data_out=xx expected=00
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__10_fault_tolerant_safety__task_100\samples\run_20260426_141859_833435_7c9834__sample_6
generated.v preview 
module ecc_guarded_byte(
    input clk,
    input rst_n,
    input write_en,
    input read_en,
    input [7:0] data_in,
    input inject_single_fault,
    input inject_double_fault,
    output reg [7:0] data_out,
    output reg data_valid,
    output reg correctable_error,
    output reg uncorrectable_error,
    output reg fault_sticky
);

    reg [12:0] stored_codeword;
    reg [7:0] stored_data;
    reg read_pending;
    reg [12:0] read_codeword;
    reg [12:0] injected_codeword;
    reg [12:0] corrected_codeword;
    reg [12:0] syndrome;
    reg single_bit_error;
    reg double_bit_error;
    reg [3:0] error_position;
    reg [7:0] read_data;
    reg [7:0] corrected_data;
    reg write_pending;

    // SECDED ECC encoding
    // 8 data bits + 5 ECC bits = 13 bits
    function [12:0] encode_ecc;
...
functional details 
[stdout]
ERROR (async reset): data_out=xx expected=00
ERROR (post reset): data_out=xx expected=00
ERROR (write response idle): data_out=xx expected=00
ERROR (clean read): data_out=xx expected=a5
ERROR (clean read): data_valid=0 expected=1
ERROR (clean read pulse clear): data_out=xx expected=00
ERROR (single fault corrected): data_out=xx expected=a5
ERROR (single fault corrected): correctable_error=0 expected=1
ERROR (single fault corrected): fault_sticky=0 expected=1
ERROR (sticky after single fault): data_out=a5 expected=00
ERROR (sticky after single fault): data_valid=1 expected=0
ERROR (sticky after single fault): correctable_error=1 expected=0
ERROR (reset clears sticky): data_out=a5 expected=00
ERROR (write priority over read): data_out=a5 expected=00
ERROR (double fault priority): data_out=a5 expected=00
ERROR (double fault priority): data_valid=0 expected=1
ERROR (double fault priority): uncorrectable_error=0 expected=1
ERROR (double fault priority): fault_sticky=0 expected=1
ERROR (sticky after double fault): data_out=a5 expected=00
ERROR (sticky after double fault): fault_sticky=0 expected=1
ERROR (stored data preserved): data_out=a5 expected=3c
ERROR (stored data preserved): fault_sticky=0 expected=1
ERROR (final async reset): data_out=a5 expected=00
ERROR (storage cleared by reset): data_out=a5 expected=00
TEST_FAILED
/workspace/banchmarks/pashencev/10_fault_tolerant_safety/task_100/tb.v:176: $finish called at 136000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (async reset): data_out=xx expected=00",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_7 run_20260424_172135_562392_bd9fc2 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (clean read): data_out=00 expected=a5
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__10_fault_tolerant_safety__task_100\samples\run_20260424_172135_562392_bd9fc2__sample_7
generated.v preview 
module ecc_guarded_byte(
    input clk,
    input rst_n,
    input write_en,
    input read_en,
    input [7:0] data_in,
    input inject_single_fault,
    input inject_double_fault,
    output reg [7:0] data_out,
    output reg data_valid,
    output reg correctable_error,
    output reg uncorrectable_error,
    output reg fault_sticky
);

reg [7:0] stored_data;
reg [12:0] stored_codeword;
reg [12:0] read_codeword;
reg read_pending;
reg write_pending;
reg [12:0] write_codeword;
reg [12:0] injected_codeword;
reg single_fault_injected;
reg double_fault_injected;

// SECDED encoding
function [12:0] encode_secded;
    input [7:0] data;
    reg [12:0] codeword;
    reg [3:0] parity;
    reg [3:0] p0, p1, p2, p3, p4;
    reg [7:0] d0, d1, d2, d3, d4, d5, d6, d7;
...
functional details 
[stdout]
ERROR (clean read): data_out=00 expected=a5
ERROR (clean read): data_valid=0 expected=1
ERROR (clean read pulse clear): data_out=a5 expected=00
ERROR (clean read pulse clear): data_valid=1 expected=0
ERROR (single fault corrected): data_valid=0 expected=1
ERROR (single fault corrected): correctable_error=0 expected=1
ERROR (single fault corrected): fault_sticky=0 expected=1
ERROR (sticky after single fault): data_out=a5 expected=00
ERROR (sticky after single fault): data_valid=1 expected=0
ERROR (sticky after single fault): fault_sticky=0 expected=1
ERROR (double fault priority): data_valid=0 expected=1
ERROR (double fault priority): uncorrectable_error=0 expected=1
ERROR (double fault priority): fault_sticky=0 expected=1
ERROR (sticky after double fault): data_out=3c expected=00
ERROR (sticky after double fault): data_valid=1 expected=0
ERROR (sticky after double fault): fault_sticky=0 expected=1
ERROR (stored data preserved): data_valid=0 expected=1
ERROR (stored data preserved): fault_sticky=0 expected=1
ERROR (storage cleared by reset): data_valid=0 expected=1
TEST_FAILED
/workspace/banchmarks/10_fault_tolerant_safety/task_100/tb.v:176: $finish called at 136000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (clean read): data_out=00 expected=a5",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_7 run_20260424_230145_632624_082334 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (clean read): data_out=00 expected=a5
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__10_fault_tolerant_safety__task_100\samples\run_20260424_230145_632624_082334__sample_7
generated.v preview 
module ecc_guarded_byte (
    input clk,
    input rst_n,
    input write_en,
    input read_en,
    input [7:0] data_in,
    input inject_single_fault,
    input inject_double_fault,
    output reg [7:0] data_out,
    output reg data_valid,
    output reg correctable_error,
    output reg uncorrectable_error,
    output reg fault_sticky
);

reg [12:0] stored_codeword;
reg [7:0] stored_data;
reg read_pending;
reg [12:0] read_codeword;
reg [12:0] injected_codeword;
reg [12:0] corrected_codeword;
reg single_fault_detected;
reg double_fault_detected;
reg [3:0] syndrome;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        stored_codeword <= 13'h000;
        stored_data <= 8'h00;
        read_pending <= 1'b0;
        data_out <= 8'h00;
        data_valid <= 1'b0;
...
functional details 
[stdout]
ERROR (clean read): data_out=00 expected=a5
ERROR (clean read): data_valid=0 expected=1
ERROR (clean read pulse clear): data_out=a5 expected=00
ERROR (clean read pulse clear): data_valid=1 expected=0
ERROR (clean read pulse clear): fault_sticky=x expected=0
ERROR (single fault corrected): correctable_error=0 expected=1
ERROR (single fault corrected): fault_sticky=x expected=1
ERROR (sticky after single fault): data_out=a5 expected=00
ERROR (sticky after single fault): data_valid=1 expected=0
ERROR (sticky after single fault): fault_sticky=x expected=1
ERROR (double fault priority): data_valid=0 expected=1
ERROR (double fault priority): uncorrectable_error=0 expected=1
ERROR (double fault priority): fault_sticky=0 expected=1
ERROR (sticky after double fault): data_out=xx expected=00
ERROR (sticky after double fault): data_valid=1 expected=0
ERROR (sticky after double fault): correctable_error=1 expected=0
ERROR (stored data preserved): data_out=xx expected=3c
ERROR (stored data preserved): correctable_error=1 expected=0
ERROR (storage cleared by reset): data_valid=0 expected=1
TEST_FAILED
/workspace/banchmarks/pashencev/10_fault_tolerant_safety/task_100/tb.v:176: $finish called at 136000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (clean read): data_out=00 expected=a5",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_7 run_20260426_141859_833435_7c9834 ok failed failed skipped failed syntax /data/eval/out/run_20260426_141859_833435_7c9834/tmp/qwen_coder_30/pashencev__10_fault_tolerant_safety__task_100/sample_7/generated.v:88: sorry: break statements not supported.
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__10_fault_tolerant_safety__task_100\samples\run_20260426_141859_833435_7c9834__sample_7
generated.v preview 
module ecc_guarded_byte(
    input clk,
    input rst_n,
    input write_en,
    input read_en,
    input [7:0] data_in,
    input inject_single_fault,
    input inject_double_fault,
    output reg [7:0] data_out,
    output reg data_valid,
    output reg correctable_error,
    output reg uncorrectable_error,
    output reg fault_sticky
);

    reg [12:0] stored_codeword;
    reg [7:0] stored_data;
    reg read_pending;
    reg [12:0] read_codeword;
    reg [12:0] injected_codeword;
    reg [12:0] corrected_codeword;
    reg single_error;
    reg double_error;
    reg [3:0] syndrome;
    reg [12:0] parity_bits;
    reg [12:0] data_bits;

    // SECDED encoding
    function [12:0] encode_secded;
        input [7:0] data;
        reg [12:0] codeword;
        reg [3:0] syndrome;
...
syntax details 
[stderr]
/data/eval/out/run_20260426_141859_833435_7c9834/tmp/qwen_coder_30/pashencev__10_fault_tolerant_safety__task_100/sample_7/generated.v:88: sorry: break statements not supported.
functional details 
[stderr]
/data/eval/out/run_20260426_141859_833435_7c9834/tmp/qwen_coder_30/pashencev__10_fault_tolerant_safety__task_100/sample_7/functional/generated.v:88: sorry: break statements not supported.
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "syntax",
    "code": "syntax.iverilog_failed",
    "message": "/data/eval/out/run_20260426_141859_833435_7c9834/tmp/qwen_coder_30/pashencev__10_fault_tolerant_safety__task_100/sample_7/generated.v:88: sorry: break statements not supported.\n",
    "retryable": false,
    "details": {}
  },
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/data/eval/out/run_20260426_141859_833435_7c9834/tmp/qwen_coder_30/pashencev__10_fault_tolerant_safety__task_100/sample_7/functional/generated.v:88: sorry: break statements not supported.\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": false,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_8 run_20260424_172135_562392_bd9fc2 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (clean read): data_out=00 expected=a5
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__10_fault_tolerant_safety__task_100\samples\run_20260424_172135_562392_bd9fc2__sample_8
generated.v preview 
module ecc_guarded_byte (
    input clk,
    input rst_n,
    input write_en,
    input read_en,
    input [7:0] data_in,
    input inject_single_fault,
    input inject_double_fault,
    output reg [7:0] data_out,
    output reg data_valid,
    output reg correctable_error,
    output reg uncorrectable_error,
    output reg fault_sticky
);

reg [12:0] stored_codeword;
reg [7:0] stored_data;
reg read_pending;
reg write_pending;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        stored_codeword <= 13'h000;
        stored_data <= 8'h00;
        data_out <= 8'h00;
        data_valid <= 1'b0;
        correctable_error <= 1'b0;
        uncorrectable_error <= 1'b0;
        fault_sticky <= 1'b0;
        read_pending <= 1'b0;
        write_pending <= 1'b0;
    end else begin
...
functional details 
[stdout]
ERROR (clean read): data_out=00 expected=a5
ERROR (clean read): data_valid=0 expected=1
ERROR (single fault corrected): correctable_error=0 expected=1
ERROR (single fault corrected): fault_sticky=0 expected=1
ERROR (sticky after single fault): data_out=a5 expected=00
ERROR (sticky after single fault): data_valid=1 expected=0
ERROR (sticky after single fault): fault_sticky=0 expected=1
ERROR (write priority over read): data_valid=1 expected=0
ERROR (double fault priority): data_valid=0 expected=1
ERROR (double fault priority): uncorrectable_error=0 expected=1
ERROR (double fault priority): fault_sticky=0 expected=1
ERROR (sticky after double fault): fault_sticky=0 expected=1
ERROR (stored data preserved): fault_sticky=0 expected=1
TEST_FAILED
/workspace/banchmarks/10_fault_tolerant_safety/task_100/tb.v:176: $finish called at 136000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (clean read): data_out=00 expected=a5",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_8 run_20260424_230145_632624_082334 failed failed failed skipped failed extract Model response is empty
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__10_fault_tolerant_safety__task_100\samples\run_20260424_230145_632624_082334__sample_8
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "model_request",
    "code": "model_request.failed",
    "message": "HTTPConnectionPool(host='ollama', port=11434): Read timed out. (read timeout=120)",
    "retryable": true,
    "details": {}
  },
  {
    "stage": "extract",
    "code": "extract.no_verilog_found",
    "message": "Model response is empty",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": false,
  "extract_ok": false,
  "syntax_ok": false,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_8 run_20260426_141859_833435_7c9834 ok failed failed skipped failed syntax /data/eval/out/run_20260426_141859_833435_7c9834/tmp/qwen_coder_30/pashencev__10_fault_tolerant_safety__task_100/sample_8/generated.v:107: syntax error
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__10_fault_tolerant_safety__task_100\samples\run_20260426_141859_833435_7c9834__sample_8
generated.v preview 
module ecc_guarded_byte (
    input clk,
    input rst_n,
    input write_en,
    input read_en,
    input [7:0] data_in,
    input inject_single_fault,
    input inject_double_fault,
    output reg [7:0] data_out,
    output reg data_valid,
    output reg correctable_error,
    output reg uncorrectable_error,
    output reg fault_sticky
);

reg [12:0] stored_codeword;
reg [7:0] stored_data;
reg read_pending;
reg [12:0] read_codeword;
reg [12:0] injected_codeword;
reg [12:0] corrected_codeword;
reg [12:0] syndrome;
reg single_bit_error;
reg double_bit_error;
reg [3:0] error_position;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        stored_codeword <= 13'h000;
        stored_data <= 8'h00;
        read_pending <= 1'b0;
        data_out <= 8'h00;
...
syntax details 
[stderr]
/data/eval/out/run_20260426_141859_833435_7c9834/tmp/qwen_coder_30/pashencev__10_fault_tolerant_safety__task_100/sample_8/generated.v:107: syntax error
/data/eval/out/run_20260426_141859_833435_7c9834/tmp/qwen_coder_30/pashencev__10_fault_tolerant_safety__task_100/sample_8/generated.v:107: error: Malformed statement
functional details 
[stderr]
/data/eval/out/run_20260426_141859_833435_7c9834/tmp/qwen_coder_30/pashencev__10_fault_tolerant_safety__task_100/sample_8/functional/generated.v:107: syntax error
/data/eval/out/run_20260426_141859_833435_7c9834/tmp/qwen_coder_30/pashencev__10_fault_tolerant_safety__task_100/sample_8/functional/generated.v:107: error: Malformed statement
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "syntax",
    "code": "syntax.iverilog_failed",
    "message": "/data/eval/out/run_20260426_141859_833435_7c9834/tmp/qwen_coder_30/pashencev__10_fault_tolerant_safety__task_100/sample_8/generated.v:107: syntax error\n/data/eval/out/run_20260426_141859_833435_7c9834/tmp/qwen_coder_30/pashencev__10_fault_tolerant_safety__task_100/sample_8/generated.v:107: error: Malformed statement\n",
    "retryable": false,
    "details": {}
  },
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/data/eval/out/run_20260426_141859_833435_7c9834/tmp/qwen_coder_30/pashencev__10_fault_tolerant_safety__task_100/sample_8/functional/generated.v:107: syntax error\n/data/eval/out/run_20260426_141859_833435_7c9834/tmp/qwen_coder_30/pashencev__10_fault_tolerant_safety__task_100/sample_8/functional/generated.v:107: error: Malformed statement\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": false,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_9 run_20260424_172135_562392_bd9fc2 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (clean read): data_out=00 expected=a5
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__10_fault_tolerant_safety__task_100\samples\run_20260424_172135_562392_bd9fc2__sample_9
generated.v preview 
module ecc_guarded_byte (
    input clk,
    input rst_n,
    input write_en,
    input read_en,
    input [7:0] data_in,
    input inject_single_fault,
    input inject_double_fault,
    output reg [7:0] data_out,
    output reg data_valid,
    output reg correctable_error,
    output reg uncorrectable_error,
    output reg fault_sticky
);

reg [12:0] stored_codeword;
reg [7:0] stored_data;
reg read_pending;
reg [12:0] read_codeword;
reg [12:0] injected_codeword;
reg [12:0] corrected_codeword;
reg single_fault_detected;
reg double_fault_detected;
reg [3:0] syndrome;
reg [12:0] parity_bits;
reg [12:0] data_bits;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        stored_codeword <= 13'h000;
        stored_data <= 8'h00;
        read_pending <= 1'b0;
...
functional details 
[stdout]
ERROR (clean read): data_out=00 expected=a5
ERROR (clean read): data_valid=0 expected=1
ERROR (clean read pulse clear): data_out=a5 expected=00
ERROR (clean read pulse clear): data_valid=1 expected=0
ERROR (single fault corrected): data_valid=0 expected=1
ERROR (single fault corrected): correctable_error=0 expected=1
ERROR (single fault corrected): fault_sticky=0 expected=1
ERROR (sticky after single fault): data_out=a5 expected=00
ERROR (sticky after single fault): data_valid=1 expected=0
ERROR (sticky after single fault): fault_sticky=0 expected=1
ERROR (double fault priority): data_valid=0 expected=1
ERROR (double fault priority): uncorrectable_error=0 expected=1
ERROR (double fault priority): fault_sticky=0 expected=1
ERROR (sticky after double fault): data_out=3c expected=00
ERROR (sticky after double fault): data_valid=1 expected=0
ERROR (sticky after double fault): fault_sticky=0 expected=1
ERROR (stored data preserved): data_valid=0 expected=1
ERROR (stored data preserved): fault_sticky=0 expected=1
ERROR (storage cleared by reset): data_valid=0 expected=1
TEST_FAILED
/workspace/banchmarks/10_fault_tolerant_safety/task_100/tb.v:176: $finish called at 136000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (clean read): data_out=00 expected=a5",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_9 run_20260424_230145_632624_082334 failed failed failed skipped failed extract Model response is empty
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__10_fault_tolerant_safety__task_100\samples\run_20260424_230145_632624_082334__sample_9
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "model_request",
    "code": "model_request.failed",
    "message": "HTTPConnectionPool(host='ollama', port=11434): Read timed out. (read timeout=120)",
    "retryable": true,
    "details": {}
  },
  {
    "stage": "extract",
    "code": "extract.no_verilog_found",
    "message": "Model response is empty",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": false,
  "extract_ok": false,
  "syntax_ok": false,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_9 run_20260426_141859_833435_7c9834 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (clean read): data_out=00 expected=a5
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__10_fault_tolerant_safety__task_100\samples\run_20260426_141859_833435_7c9834__sample_9
generated.v preview 
module ecc_guarded_byte (
    input clk,
    input rst_n,
    input write_en,
    input read_en,
    input [7:0] data_in,
    input inject_single_fault,
    input inject_double_fault,
    output reg [7:0] data_out,
    output reg data_valid,
    output reg correctable_error,
    output reg uncorrectable_error,
    output reg fault_sticky
);

reg [12:0] stored_codeword;
reg [7:0] stored_data;
reg read_pending;
reg [12:0] read_codeword;
reg [12:0] injected_codeword;
reg [12:0] corrected_codeword;
reg [12:0] syndrome;
reg single_bit_error;
reg double_bit_error;
reg [3:0] error_position;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        stored_codeword <= 13'h000;
        stored_data <= 8'h00;
        read_pending <= 1'b0;
        data_out <= 8'h00;
...
functional details 
[stdout]
ERROR (clean read): data_out=00 expected=a5
ERROR (clean read): data_valid=0 expected=1
ERROR (clean read pulse clear): data_out=a5 expected=00
ERROR (clean read pulse clear): data_valid=1 expected=0
ERROR (single fault corrected): data_valid=0 expected=1
ERROR (single fault corrected): correctable_error=0 expected=1
ERROR (single fault corrected): fault_sticky=0 expected=1
ERROR (sticky after single fault): data_out=a5 expected=00
ERROR (sticky after single fault): data_valid=1 expected=0
ERROR (sticky after single fault): fault_sticky=0 expected=1
ERROR (double fault priority): data_valid=0 expected=1
ERROR (double fault priority): uncorrectable_error=0 expected=1
ERROR (double fault priority): fault_sticky=0 expected=1
ERROR (sticky after double fault): data_valid=1 expected=0
ERROR (sticky after double fault): fault_sticky=0 expected=1
ERROR (stored data preserved): data_out=00 expected=3c
ERROR (stored data preserved): data_valid=0 expected=1
ERROR (stored data preserved): fault_sticky=0 expected=1
ERROR (storage cleared by reset): data_valid=0 expected=1
TEST_FAILED
/workspace/banchmarks/pashencev/10_fault_tolerant_safety/task_100/tb.v:176: $finish called at 136000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (clean read): data_out=00 expected=a5",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_10 run_20260424_172135_562392_bd9fc2 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (clean read): data_out=00 expected=a5
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__10_fault_tolerant_safety__task_100\samples\run_20260424_172135_562392_bd9fc2__sample_10
generated.v preview 
module ecc_guarded_byte(
    input clk,
    input rst_n,
    input write_en,
    input read_en,
    input [7:0] data_in,
    input inject_single_fault,
    input inject_double_fault,
    output reg [7:0] data_out,
    output reg data_valid,
    output reg correctable_error,
    output reg uncorrectable_error,
    output reg fault_sticky
);

    reg [12:0] stored_codeword;
    reg [7:0] stored_data;
    reg read_pending;
    reg [12:0] read_codeword;
    reg [12:0] injected_codeword;
    reg [12:0] corrected_codeword;
    reg [12:0] syndrome;
    reg single_bit_error;
    reg double_bit_error;
    reg [3:0] error_position;
    reg [7:0] read_data;
    reg read_data_valid;
    reg read_correctable_error;
    reg read_uncorrectable_error;

    // SECDED ECC encoding
    // 8 data bits + 5 ECC bits = 13 bits
...
functional details 
[stdout]
ERROR (clean read): data_out=00 expected=a5
ERROR (clean read): data_valid=0 expected=1
ERROR (clean read pulse clear): data_out=a5 expected=00
ERROR (clean read pulse clear): data_valid=1 expected=0
ERROR (single fault corrected): data_valid=0 expected=1
ERROR (single fault corrected): correctable_error=0 expected=1
ERROR (single fault corrected): fault_sticky=0 expected=1
ERROR (sticky after single fault): data_out=a5 expected=00
ERROR (sticky after single fault): data_valid=1 expected=0
ERROR (sticky after single fault): fault_sticky=0 expected=1
ERROR (double fault priority): data_valid=0 expected=1
ERROR (double fault priority): uncorrectable_error=0 expected=1
ERROR (double fault priority): fault_sticky=0 expected=1
ERROR (sticky after double fault): data_out=3c expected=00
ERROR (sticky after double fault): data_valid=1 expected=0
ERROR (sticky after double fault): fault_sticky=0 expected=1
ERROR (stored data preserved): data_valid=0 expected=1
ERROR (stored data preserved): fault_sticky=0 expected=1
ERROR (storage cleared by reset): data_valid=0 expected=1
TEST_FAILED
/workspace/banchmarks/10_fault_tolerant_safety/task_100/tb.v:176: $finish called at 136000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (clean read): data_out=00 expected=a5",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_10 run_20260424_230145_632624_082334 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (clean read): data_out=00 expected=a5
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__10_fault_tolerant_safety__task_100\samples\run_20260424_230145_632624_082334__sample_10
generated.v preview 
module ecc_guarded_byte (
    input clk,
    input rst_n,
    input write_en,
    input read_en,
    input [7:0] data_in,
    input inject_single_fault,
    input inject_double_fault,
    output reg [7:0] data_out,
    output reg data_valid,
    output reg correctable_error,
    output reg uncorrectable_error,
    output reg fault_sticky
);

reg [12:0] stored_codeword;
reg [7:0] stored_data;
reg read_pending;
reg write_pending;
reg [12:0] read_codeword;
reg [12:0] injected_codeword;
reg [12:0] corrected_codeword;
reg [12:0] syndrome;
reg single_bit_error;
reg double_bit_error;
reg [12:0] parity_bits;
reg [12:0] data_bits;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        stored_codeword <= 13'h000;
        data_out <= 8'h00;
...
functional details 
[stdout]
ERROR (clean read): data_out=00 expected=a5
ERROR (clean read): data_valid=0 expected=1
ERROR (clean read pulse clear): data_out=a5 expected=00
ERROR (clean read pulse clear): data_valid=1 expected=0
ERROR (single fault corrected): data_valid=0 expected=1
ERROR (single fault corrected): correctable_error=0 expected=1
ERROR (single fault corrected): fault_sticky=0 expected=1
ERROR (sticky after single fault): data_out=a5 expected=00
ERROR (sticky after single fault): data_valid=1 expected=0
ERROR (sticky after single fault): fault_sticky=0 expected=1
ERROR (double fault priority): data_valid=0 expected=1
ERROR (double fault priority): uncorrectable_error=0 expected=1
ERROR (double fault priority): fault_sticky=0 expected=1
ERROR (sticky after double fault): fault_sticky=0 expected=1
ERROR (stored data preserved): data_out=00 expected=3c
ERROR (stored data preserved): data_valid=0 expected=1
ERROR (stored data preserved): fault_sticky=0 expected=1
ERROR (storage cleared by reset): data_valid=0 expected=1
TEST_FAILED
/workspace/banchmarks/pashencev/10_fault_tolerant_safety/task_100/tb.v:176: $finish called at 136000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (clean read): data_out=00 expected=a5",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_10 run_20260426_141859_833435_7c9834 ok failed failed skipped failed syntax /data/eval/out/run_20260426_141859_833435_7c9834/tmp/qwen_coder_30/pashencev__10_fault_tolerant_safety__task_100/sample_10/generated.v:93: syntax error
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__10_fault_tolerant_safety__task_100\samples\run_20260426_141859_833435_7c9834__sample_10
generated.v preview 
module ecc_guarded_byte (
    input clk,
    input rst_n,
    input write_en,
    input read_en,
    input [7:0] data_in,
    input inject_single_fault,
    input inject_double_fault,
    output reg [7:0] data_out,
    output reg data_valid,
    output reg correctable_error,
    output reg uncorrectable_error,
    output reg fault_sticky
);

reg [12:0] stored_codeword;
reg [7:0] stored_data;
reg write_pending;
reg read_pending;
reg [12:0] read_codeword;
reg [12:0] injected_codeword;
reg single_fault_injected;
reg double_fault_injected;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        stored_codeword <= 13'h000;
        stored_data <= 8'h00;
        write_pending <= 1'b0;
        read_pending <= 1'b0;
        data_out <= 8'h00;
        data_valid <= 1'b0;
...
syntax details 
[stderr]
/data/eval/out/run_20260426_141859_833435_7c9834/tmp/qwen_coder_30/pashencev__10_fault_tolerant_safety__task_100/sample_10/generated.v:93: syntax error
/data/eval/out/run_20260426_141859_833435_7c9834/tmp/qwen_coder_30/pashencev__10_fault_tolerant_safety__task_100/sample_10/generated.v:93: error: Malformed statement
/data/eval/out/run_20260426_141859_833435_7c9834/tmp/qwen_coder_30/pashencev__10_fault_tolerant_safety__task_100/sample_10/generated.v:94: syntax error
/data/eval/out/run_20260426_141859_833435_7c9834/tmp/qwen_coder_30/pashencev__10_fault_tolerant_safety__task_100/sample_10/generated.v:94: error: Malformed statement
/data/eval/out/run_20260426_141859_833435_7c9834/tmp/qwen_coder_30/pashencev__10_fault_tolerant_safety__task_100/sample_10/generated.v:95: syntax error
/data/eval/out/run_20260426_141859_833435_7c9834/tmp/qwen_coder_30/pashencev__10_fault_tolerant_safety__task_100/sample_10/generated.v:95: error: Malformed statement
/data/eval/out/run_20260426_141859_833435_7c9834/tmp/qwen_coder_30/pashencev__10_fault_tolerant_safety__task_100/sample_10/generated.v:96: syntax error
/data/eval/out/run_20260426_141859_833435_7c9834/tmp/qwen_coder_30/pashencev__10_fault_tolerant_safety__task_100/sample_10/generated.v:96: error: Malformed statement
functional details 
[stderr]
/data/eval/out/run_20260426_141859_833435_7c9834/tmp/qwen_coder_30/pashencev__10_fault_tolerant_safety__task_100/sample_10/functional/generated.v:93: syntax error
/data/eval/out/run_20260426_141859_833435_7c9834/tmp/qwen_coder_30/pashencev__10_fault_tolerant_safety__task_100/sample_10/functional/generated.v:93: error: Malformed statement
/data/eval/out/run_20260426_141859_833435_7c9834/tmp/qwen_coder_30/pashencev__10_fault_tolerant_safety__task_100/sample_10/functional/generated.v:94: syntax error
/data/eval/out/run_20260426_141859_833435_7c9834/tmp/qwen_coder_30/pashencev__10_fault_tolerant_safety__task_100/sample_10/functional/generated.v:94: error: Malformed statement
/data/eval/out/run_20260426_141859_833435_7c9834/tmp/qwen_coder_30/pashencev__10_fault_tolerant_safety__task_100/sample_10/functional/generated.v:95: syntax error
/data/eval/out/run_20260426_141859_833435_7c9834/tmp/qwen_coder_30/pashencev__10_fault_tolerant_safety__task_100/sample_10/functional/generated.v:95: error: Malformed statement
/data/eval/out/run_20260426_141859_833435_7c9834/tmp/qwen_coder_30/pashencev__10_fault_tolerant_safety__task_100/sample_10/functional/generated.v:96: syntax error
/data/eval/out/run_20260426_141859_833435_7c9834/tmp/qwen_coder_30/pashencev__10_fault_tolerant_safety__task_100/sample_10/functional/generated.v:96: error: Malformed statement
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "syntax",
    "code": "syntax.iverilog_failed",
    "message": "/data/eval/out/run_20260426_141859_833435_7c9834/tmp/qwen_coder_30/pashencev__10_fault_tolerant_safety__task_100/sample_10/generated.v:93: syntax error\n/data/eval/out/run_20260426_141859_833435_7c9834/tmp/qwen_coder_30/pashencev__10_fault_tolerant_safety__task_100/sample_10/generated.v:93: error: Malformed statement\n/data/eval/out/run_20260426_141859_833435_7c9834/tmp/qwen_coder_30/pashencev__10_fault_tolerant_safety__task_100/sample_10/generated.v:94: syntax error\n/data/eval/out/run_20260426_141859_833435_7c9834/tmp/qwen_coder_30/pashencev__10_fault_tolerant_safety__task_100/sample_10/generated.v:94: error: Malformed statement\n/data/eval/out/run_20260426_141859_833435_7c9834/tmp/qwen_coder_30/pashencev__10_fault_tolerant_safety__task_100/sample_10/generated.v:95: syntax error\n/data/eval/out/run_20260426_141859_833435_7c9834/tmp/qwen_coder_30/pashencev__10_fault_tolerant_safety__task_100/sample_10/generated.v:95: error: Malformed statement\n/data/eval/out/run_20260426_141859_833435_7c9834/tmp/qwen_coder_30/pashencev__10_fault_tolerant_safety__task_100/sample_10/generated.v:96: syntax error\n/data/eval/out/run_20260426_141859_833435_7c9834/tmp/qwen_coder_30/pashencev__10_fault_tolerant_safety__task_100/sample_10/generated.v:96: error: Malformed statement\n",
    "retryable": false,
    "details": {}
  },
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/data/eval/out/run_20260426_141859_833435_7c9834/tmp/qwen_coder_30/pashencev__10_fault_tolerant_safety__task_100/sample_10/functional/generated.v:93: syntax error\n/data/eval/out/run_20260426_141859_833435_7c9834/tmp/qwen_coder_30/pashencev__10_fault_tolerant_safety__task_100/sample_10/functional/generated.v:93: error: Malformed statement\n/data/eval/out/run_20260426_141859_833435_7c9834/tmp/qwen_coder_30/pashencev__10_fault_tolerant_safety__task_100/sample_10/functional/generated.v:94: syntax error\n/data/eval/out/run_20260426_141859_833435_7c9834/tmp/qwen_coder_30/pashencev__10_fault_tolerant_safety__task_100/sample_10/functional/generated.v:94: error: Malformed statement\n/data/eval/out/run_20260426_141859_833435_7c9834/tmp/qwen_coder_30/pashencev__10_fault_tolerant_safety__task_100/sample_10/functional/generated.v:95: syntax error\n/data/eval/out/run_20260426_141859_833435_7c9834/tmp/qwen_coder_30/pashencev__10_fault_tolerant_safety__task_100/sample_10/functional/generated.v:95: error: Malformed statement\n/data/eval/out/run_20260426_141859_833435_7c9834/tmp/qwen_coder_30/pashencev__10_fault_tolerant_safety__task_100/sample_10/functional/generated.v:96: syntax error\n/data/eval/out/run_20260426_141859_833435_7c9834/tmp/qwen_coder_30/pashencev__10_fault_tolerant_safety__task_100/sample_10/functional/generated.v:96: error: Malformed statement\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": false,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}