Назад к моделям Назад к профилю модели

qwen3-coder:30b | RAG on

11_side_channel_constant_time / task_110 | consttime_word_compare

benchmarkilyasov
task_idilyasov/11_side_channel_constant_time/task_110
samples_total33
final_success_samples3
final_success_rate_samples9.1%
functional_pass_rate_samples9.1%
synth_pass_rate_samples9.1%
source_runsrun_20260424_144121_405769_1acdc5, run_20260424_172135_562392_bd9fc2, run_20260424_230145_632624_082334, run_20260426_141859_833435_7c9834

Что показывает эта страница

Здесь перечислены все реальные попытки этой модели на одной задаче. По каждой попытке можно увидеть, до какой стадии она дошла, где именно сломалась и какое сообщение об ошибке вернулось из syntax, functional или synthesis.

Samples

sample run extract_ok syntax_ok functional_ok openlane_ok final_success failure_stage failure_reason details
sample_1 run_20260424_144121_405769_1acdc5 ok ok ok ok ok success Full pipeline success
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__11_side_channel_constant_time__task_110\samples\run_20260424_144121_405769_1acdc5__sample_1
generated.v preview 
module consttime_word_compare(
    input clk,
    input rst_n,
    input start,
    input [31:0] lhs,
    input [31:0] rhs,
    output reg busy,
    output reg done,
    output reg match
);

    reg [31:0] lhs_reg;
    reg [31:0] rhs_reg;
    reg [1:0] cycle_count;
    reg [3:0] match_bits;

    always @(posedge clk or negedge rst_n) begin
        if (!rst_n) begin
            busy <= 0;
            done <= 0;
            match <= 0;
            cycle_count <= 0;
            match_bits <= 0;
        end else begin
            if (start && !busy) begin
                busy <= 1;
                done <= 0;
                match <= 0;
                lhs_reg <= lhs;
                rhs_reg <= rhs;
                cycle_count <= 0;
                match_bits <= 0;
...
synthesis details 
[error]
None
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": true,
  "openlane_ok": true,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": true,
  "success": true
}
sample_1 run_20260424_172135_562392_bd9fc2 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (equal words): busy=0 expected=1
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__11_side_channel_constant_time__task_110\samples\run_20260424_172135_562392_bd9fc2__sample_1
generated.v preview 
module consttime_word_compare (
    input clk,
    input rst_n,
    input start,
    input [31:0] lhs,
    input [31:0] rhs,
    output reg busy,
    output reg done,
    output reg match
);

    reg [31:0] lhs_reg;
    reg [31:0] rhs_reg;
    reg [1:0] cycle_count;
    reg request_accepted;

    always @(posedge clk or negedge rst_n) begin
        if (!rst_n) begin
            busy <= 0;
            done <= 0;
            match <= 0;
            cycle_count <= 0;
            request_accepted <= 0;
        end else begin
            if (start && !busy && !request_accepted) begin
                lhs_reg <= lhs;
                rhs_reg <= rhs;
                busy <= 1;
                done <= 0;
                match <= 0;
                cycle_count <= 0;
                request_accepted <= 1;
...
functional details 
[stdout]
ERROR (equal words): busy=0 expected=1
ERROR (return to idle): match=1 expected=0
ERROR (mismatch byte0): busy=0 expected=1
ERROR (mismatch byte2): busy=0 expected=1
ERROR (ignore busy start result): busy=0 expected=1
ERROR (idle after ignored start): match=1 expected=0
ERROR (final mismatch): busy=0 expected=1
TEST_FAILED
/workspace/banchmarks/11_side_channel_constant_time/task_110/tb.v:161: $finish called at 356000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (equal words): busy=0 expected=1",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_1 run_20260424_230145_632624_082334 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (equal words): busy=0 expected=1
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__11_side_channel_constant_time__task_110\samples\run_20260424_230145_632624_082334__sample_1
generated.v preview 
module consttime_word_compare (
    input clk,
    input rst_n,
    input start,
    input [31:0] lhs,
    input [31:0] rhs,
    output reg busy,
    output reg done,
    output reg match
);

    reg [31:0] lhs_reg;
    reg [31:0] rhs_reg;
    reg [1:0] cycle_count;
    reg start_latch;

    always @(posedge clk or negedge rst_n) begin
        if (!rst_n) begin
            busy <= 0;
            done <= 0;
            match <= 0;
            cycle_count <= 0;
            start_latch <= 0;
        end else begin
            if (start && !busy) begin
                lhs_reg <= lhs;
                rhs_reg <= rhs;
                busy <= 1;
                done <= 0;
                match <= 0;
                cycle_count <= 0;
                start_latch <= 1;
...
functional details 
[stdout]
ERROR (equal words): busy=0 expected=1
ERROR (return to idle): match=1 expected=0
ERROR (mismatch byte0): busy=0 expected=1
ERROR (mismatch byte0): match=1 expected=0
ERROR (return to idle): match=1 expected=0
ERROR (mismatch byte2): busy=0 expected=1
ERROR (mismatch byte2): match=1 expected=0
ERROR (return to idle): match=1 expected=0
ERROR (ignore busy start result): busy=0 expected=1
ERROR (idle after ignored start): match=1 expected=0
ERROR (final mismatch): busy=0 expected=1
ERROR (final mismatch): match=1 expected=0
ERROR (return to idle): match=1 expected=0
TEST_FAILED
/workspace/banchmarks/pashencev/11_side_channel_constant_time/task_110/tb.v:161: $finish called at 356000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (equal words): busy=0 expected=1",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_1 run_20260426_141859_833435_7c9834 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (return to idle): busy=1 expected=0
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__11_side_channel_constant_time__task_110\samples\run_20260426_141859_833435_7c9834__sample_1
generated.v preview 
module consttime_word_compare(
    input clk,
    input rst_n,
    input start,
    input [31:0] lhs,
    input [31:0] rhs,
    output reg busy,
    output reg done,
    output reg match
);

    reg [31:0] lhs_reg;
    reg [31:0] rhs_reg;
    reg [1:0] cycle_count;
    reg [3:0] match_bits;

    always @(posedge clk or negedge rst_n) begin
        if (!rst_n) begin
            busy <= 0;
            done <= 0;
            match <= 0;
            cycle_count <= 0;
            match_bits <= 0;
        end else begin
            if (start && !busy) begin
                busy <= 1;
                done <= 0;
                match <= 0;
                lhs_reg <= lhs;
                rhs_reg <= rhs;
                cycle_count <= 0;
                match_bits <= 0;
...
functional details 
[stdout]
ERROR (return to idle): busy=1 expected=0
ERROR (return to idle): match=1 expected=0
ERROR (accept request): match=1 expected=0
ERROR (mismatch byte0): match=1 expected=0
ERROR (mismatch byte0): done=1 expected=0
ERROR (mismatch byte0): match=1 expected=0
ERROR (mismatch byte0): match=1 expected=0
ERROR (mismatch byte0): done=0 expected=1
ERROR (mismatch byte0): match=1 expected=0
ERROR (return to idle): busy=1 expected=0
ERROR (return to idle): match=1 expected=0
ERROR (accept request): done=1 expected=0
ERROR (accept request): match=1 expected=0
ERROR (mismatch byte2): match=1 expected=0
ERROR (mismatch byte2): match=1 expected=0
ERROR (mismatch byte2): match=1 expected=0
ERROR (mismatch byte2): match=1 expected=0
ERROR (return to idle): busy=1 expected=0
ERROR (return to idle): match=1 expected=0
ERROR (accept request): match=1 expected=0
ERROR (ignore busy start): match=1 expected=0
ERROR (ignore busy start progress): done=1 expected=0
ERROR (ignore busy start progress): match=1 expected=0
ERROR (ignore busy start progress): match=1 expected=0
ERROR (ignore busy start result): done=0 expected=1
ERROR (idle after ignored start): busy=1 expected=0
ERROR (idle after ignored start): match=1 expected=0
ERROR (accept request): done=1 expected=0
ERROR (accept request): match=1 expected=0
ERROR (mid-transaction before reset): match=1 expected=0
ERROR (final mismatch): match=1 expected=0
...
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (return to idle): busy=1 expected=0",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_2 run_20260424_144121_405769_1acdc5 ok ok ok ok ok success Full pipeline success
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__11_side_channel_constant_time__task_110\samples\run_20260424_144121_405769_1acdc5__sample_2
generated.v preview 
module consttime_word_compare(
    input clk,
    input rst_n,
    input start,
    input [31:0] lhs,
    input [31:0] rhs,
    output reg busy,
    output reg done,
    output reg match
);

    reg [31:0] lhs_reg;
    reg [31:0] rhs_reg;
    reg [1:0] cycle_count;
    reg [3:0] byte_match;

    always @(posedge clk or negedge rst_n) begin
        if (!rst_n) begin
            busy <= 0;
            done <= 0;
            match <= 0;
            cycle_count <= 0;
            byte_match <= 0;
        end else begin
            if (start && !busy) begin
                lhs_reg <= lhs;
                rhs_reg <= rhs;
                busy <= 1;
                done <= 0;
                cycle_count <= 0;
                byte_match <= 0;
            end else if (busy) begin
...
synthesis details 
[error]
None
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": true,
  "openlane_ok": true,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": true,
  "success": true
}
sample_2 run_20260424_172135_562392_bd9fc2 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (equal words): match=0 expected=1
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__11_side_channel_constant_time__task_110\samples\run_20260424_172135_562392_bd9fc2__sample_2
generated.v preview 
module consttime_word_compare(
    input clk,
    input rst_n,
    input start,
    input [31:0] lhs,
    input [31:0] rhs,
    output reg busy,
    output reg done,
    output reg match
);

    reg [31:0] lhs_reg;
    reg [31:0] rhs_reg;
    reg [1:0] cycle_count;
    reg [3:0] byte_match;

    always @(posedge clk or negedge rst_n) begin
        if (!rst_n) begin
            busy <= 0;
            done <= 0;
            match <= 0;
            cycle_count <= 0;
            byte_match <= 0;
        end else begin
            if (start && !busy) begin
                lhs_reg <= lhs;
                rhs_reg <= rhs;
                busy <= 1;
                done <= 0;
                cycle_count <= 0;
                byte_match <= 0;
            end else if (busy) begin
...
functional details 
[stdout]
ERROR (equal words): match=0 expected=1
ERROR (return to idle): busy=1 expected=0
ERROR (mismatch byte0): done=1 expected=0
ERROR (mismatch byte0): done=0 expected=1
ERROR (return to idle): busy=1 expected=0
ERROR (accept request): done=1 expected=0
ERROR (return to idle): busy=1 expected=0
ERROR (ignore busy start progress): done=1 expected=0
ERROR (ignore busy start result): done=0 expected=1
ERROR (ignore busy start result): match=0 expected=1
ERROR (idle after ignored start): busy=1 expected=0
ERROR (accept request): done=1 expected=0
ERROR (return to idle): busy=1 expected=0
TEST_FAILED
/workspace/banchmarks/11_side_channel_constant_time/task_110/tb.v:161: $finish called at 356000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (equal words): match=0 expected=1",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_2 run_20260424_230145_632624_082334 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (equal words): match=0 expected=1
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__11_side_channel_constant_time__task_110\samples\run_20260424_230145_632624_082334__sample_2
generated.v preview 
module consttime_word_compare(
    input clk,
    input rst_n,
    input start,
    input [31:0] lhs,
    input [31:0] rhs,
    output reg busy,
    output reg done,
    output reg match
);

    reg [31:0] lhs_reg;
    reg [31:0] rhs_reg;
    reg [1:0] cycle_count;
    reg [3:0] byte_match;

    always @(posedge clk or negedge rst_n) begin
        if (!rst_n) begin
            busy <= 0;
            done <= 0;
            match <= 0;
            cycle_count <= 0;
            byte_match <= 0;
        end else begin
            if (start && !busy) begin
                lhs_reg <= lhs;
                rhs_reg <= rhs;
                busy <= 1;
                done <= 0;
                cycle_count <= 0;
                byte_match <= 0;
            end else if (busy) begin
...
functional details 
[stdout]
ERROR (equal words): match=0 expected=1
ERROR (return to idle): busy=1 expected=0
ERROR (mismatch byte0): done=1 expected=0
ERROR (mismatch byte0): done=0 expected=1
ERROR (return to idle): busy=1 expected=0
ERROR (accept request): done=1 expected=0
ERROR (return to idle): busy=1 expected=0
ERROR (ignore busy start progress): done=1 expected=0
ERROR (ignore busy start result): done=0 expected=1
ERROR (ignore busy start result): match=0 expected=1
ERROR (idle after ignored start): busy=1 expected=0
ERROR (accept request): done=1 expected=0
ERROR (return to idle): busy=1 expected=0
TEST_FAILED
/workspace/banchmarks/pashencev/11_side_channel_constant_time/task_110/tb.v:161: $finish called at 356000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (equal words): match=0 expected=1",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_2 run_20260426_141859_833435_7c9834 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (return to idle): busy=1 expected=0
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__11_side_channel_constant_time__task_110\samples\run_20260426_141859_833435_7c9834__sample_2
generated.v preview 
module consttime_word_compare(
    input clk,
    input rst_n,
    input start,
    input [31:0] lhs,
    input [31:0] rhs,
    output reg busy,
    output reg done,
    output reg match
);

    reg [31:0] lhs_reg;
    reg [31:0] rhs_reg;
    reg [1:0] cycle_count;
    reg [3:0] match_bits;

    always @(posedge clk or negedge rst_n) begin
        if (!rst_n) begin
            busy <= 0;
            done <= 0;
            match <= 0;
            cycle_count <= 0;
            match_bits <= 0;
        end else begin
            if (start && !busy) begin
                lhs_reg <= lhs;
                rhs_reg <= rhs;
                busy <= 1;
                done <= 0;
                cycle_count <= 0;
                match_bits <= 0;
            end else if (busy) begin
...
functional details 
[stdout]
ERROR (return to idle): busy=1 expected=0
ERROR (return to idle): match=1 expected=0
ERROR (accept request): match=1 expected=0
ERROR (mismatch byte0): match=1 expected=0
ERROR (mismatch byte0): done=1 expected=0
ERROR (mismatch byte0): match=1 expected=0
ERROR (mismatch byte0): match=1 expected=0
ERROR (mismatch byte0): done=0 expected=1
ERROR (mismatch byte0): match=1 expected=0
ERROR (return to idle): busy=1 expected=0
ERROR (return to idle): match=1 expected=0
ERROR (accept request): done=1 expected=0
ERROR (accept request): match=1 expected=0
ERROR (mismatch byte2): match=1 expected=0
ERROR (mismatch byte2): match=1 expected=0
ERROR (mismatch byte2): match=1 expected=0
ERROR (mismatch byte2): match=1 expected=0
ERROR (return to idle): busy=1 expected=0
ERROR (return to idle): match=1 expected=0
ERROR (accept request): match=1 expected=0
ERROR (ignore busy start): match=1 expected=0
ERROR (ignore busy start progress): done=1 expected=0
ERROR (ignore busy start progress): match=1 expected=0
ERROR (ignore busy start progress): match=1 expected=0
ERROR (ignore busy start result): done=0 expected=1
ERROR (idle after ignored start): busy=1 expected=0
ERROR (idle after ignored start): match=1 expected=0
ERROR (accept request): done=1 expected=0
ERROR (accept request): match=1 expected=0
ERROR (mid-transaction before reset): match=1 expected=0
ERROR (final mismatch): match=1 expected=0
...
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (return to idle): busy=1 expected=0",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_3 run_20260424_144121_405769_1acdc5 ok ok ok ok ok success Full pipeline success
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__11_side_channel_constant_time__task_110\samples\run_20260424_144121_405769_1acdc5__sample_3
generated.v preview 
module consttime_word_compare(
    input clk,
    input rst_n,
    input start,
    input [31:0] lhs,
    input [31:0] rhs,
    output reg busy,
    output reg done,
    output reg match
);

    reg [31:0] lhs_reg;
    reg [31:0] rhs_reg;
    reg [1:0] cycle_count;
    reg [3:0] byte_match;

    always @(posedge clk or negedge rst_n) begin
        if (!rst_n) begin
            busy <= 0;
            done <= 0;
            match <= 0;
            cycle_count <= 0;
            byte_match <= 0;
        end else begin
            if (start && !busy) begin
                lhs_reg <= lhs;
                rhs_reg <= rhs;
                busy <= 1;
                done <= 0;
                cycle_count <= 0;
                byte_match <= 0;
            end else if (busy) begin
...
synthesis details 
[error]
None
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": true,
  "openlane_ok": true,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": true,
  "success": true
}
sample_3 run_20260424_172135_562392_bd9fc2 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (return to idle): busy=1 expected=0
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__11_side_channel_constant_time__task_110\samples\run_20260424_172135_562392_bd9fc2__sample_3
generated.v preview 
module consttime_word_compare(
    input clk,
    input rst_n,
    input start,
    input [31:0] lhs,
    input [31:0] rhs,
    output reg busy,
    output reg done,
    output reg match
);

    reg [31:0] lhs_reg;
    reg [31:0] rhs_reg;
    reg [1:0] cycle_count;
    reg [3:0] match_bits;

    always @(posedge clk or negedge rst_n) begin
        if (!rst_n) begin
            busy <= 0;
            done <= 0;
            match <= 0;
            cycle_count <= 0;
            match_bits <= 0;
        end else begin
            if (start && !busy) begin
                lhs_reg <= lhs;
                rhs_reg <= rhs;
                busy <= 1;
                done <= 0;
                cycle_count <= 0;
                match_bits <= 0;
            end else if (busy) begin
...
functional details 
[stdout]
ERROR (return to idle): busy=1 expected=0
ERROR (return to idle): match=1 expected=0
ERROR (accept request): match=1 expected=0
ERROR (mismatch byte0): match=1 expected=0
ERROR (mismatch byte0): done=1 expected=0
ERROR (mismatch byte0): match=1 expected=0
ERROR (mismatch byte0): match=1 expected=0
ERROR (mismatch byte0): done=0 expected=1
ERROR (mismatch byte0): match=1 expected=0
ERROR (return to idle): busy=1 expected=0
ERROR (return to idle): match=1 expected=0
ERROR (accept request): done=1 expected=0
ERROR (accept request): match=1 expected=0
ERROR (mismatch byte2): match=1 expected=0
ERROR (mismatch byte2): match=1 expected=0
ERROR (mismatch byte2): match=1 expected=0
ERROR (mismatch byte2): match=1 expected=0
ERROR (return to idle): busy=1 expected=0
ERROR (return to idle): match=1 expected=0
ERROR (accept request): match=1 expected=0
ERROR (ignore busy start): match=1 expected=0
ERROR (ignore busy start progress): done=1 expected=0
ERROR (ignore busy start progress): match=1 expected=0
ERROR (ignore busy start progress): match=1 expected=0
ERROR (ignore busy start result): done=0 expected=1
ERROR (idle after ignored start): busy=1 expected=0
ERROR (idle after ignored start): match=1 expected=0
ERROR (accept request): done=1 expected=0
ERROR (accept request): match=1 expected=0
ERROR (mid-transaction before reset): match=1 expected=0
ERROR (final mismatch): match=1 expected=0
...
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (return to idle): busy=1 expected=0",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_3 run_20260424_230145_632624_082334 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (equal words): busy=0 expected=1
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__11_side_channel_constant_time__task_110\samples\run_20260424_230145_632624_082334__sample_3
generated.v preview 
module consttime_word_compare(
    input clk,
    input rst_n,
    input start,
    input [31:0] lhs,
    input [31:0] rhs,
    output reg busy,
    output reg done,
    output reg match
);

    reg [31:0] lhs_reg;
    reg [31:0] rhs_reg;
    reg [1:0] cycle_count;
    reg [3:0] byte_match;

    always @(posedge clk or negedge rst_n) begin
        if (!rst_n) begin
            busy <= 0;
            done <= 0;
            match <= 0;
            cycle_count <= 0;
            byte_match <= 0;
        end else begin
            if (start && !busy) begin
                lhs_reg <= lhs;
                rhs_reg <= rhs;
                busy <= 1;
                done <= 0;
                cycle_count <= 0;
                byte_match <= 0;
            end else if (busy) begin
...
functional details 
[stdout]
ERROR (equal words): busy=0 expected=1
ERROR (equal words): done=0 expected=1
ERROR (equal words): match=0 expected=1
ERROR (mismatch byte0): busy=0 expected=1
ERROR (mismatch byte0): done=0 expected=1
ERROR (mismatch byte2): busy=0 expected=1
ERROR (mismatch byte2): done=0 expected=1
ERROR (ignore busy start result): busy=0 expected=1
ERROR (ignore busy start result): done=0 expected=1
ERROR (ignore busy start result): match=0 expected=1
ERROR (final mismatch): busy=0 expected=1
ERROR (final mismatch): done=0 expected=1
TEST_FAILED
/workspace/banchmarks/pashencev/11_side_channel_constant_time/task_110/tb.v:161: $finish called at 356000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (equal words): busy=0 expected=1",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_3 run_20260426_141859_833435_7c9834 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (equal words): match=0 expected=1
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__11_side_channel_constant_time__task_110\samples\run_20260426_141859_833435_7c9834__sample_3
generated.v preview 
module consttime_word_compare(
    input clk,
    input rst_n,
    input start,
    input [31:0] lhs,
    input [31:0] rhs,
    output reg busy,
    output reg done,
    output reg match
);

    reg [31:0] lhs_reg;
    reg [31:0] rhs_reg;
    reg [1:0] cycle_count;
    reg [3:0] byte_match;

    always @(posedge clk or negedge rst_n) begin
        if (!rst_n) begin
            busy <= 0;
            done <= 0;
            match <= 0;
            cycle_count <= 0;
            byte_match <= 0;
        end else begin
            if (start && !busy) begin
                lhs_reg <= lhs;
                rhs_reg <= rhs;
                busy <= 1;
                done <= 0;
                cycle_count <= 0;
                byte_match <= 0;
            end else if (busy) begin
...
functional details 
[stdout]
ERROR (equal words): match=0 expected=1
ERROR (return to idle): busy=1 expected=0
ERROR (mismatch byte0): done=1 expected=0
ERROR (mismatch byte0): done=0 expected=1
ERROR (return to idle): busy=1 expected=0
ERROR (accept request): done=1 expected=0
ERROR (return to idle): busy=1 expected=0
ERROR (ignore busy start progress): done=1 expected=0
ERROR (ignore busy start result): done=0 expected=1
ERROR (ignore busy start result): match=0 expected=1
ERROR (idle after ignored start): busy=1 expected=0
ERROR (accept request): done=1 expected=0
ERROR (return to idle): busy=1 expected=0
TEST_FAILED
/workspace/banchmarks/pashencev/11_side_channel_constant_time/task_110/tb.v:161: $finish called at 356000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (equal words): match=0 expected=1",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_4 run_20260424_172135_562392_bd9fc2 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (equal words): match=0 expected=1
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__11_side_channel_constant_time__task_110\samples\run_20260424_172135_562392_bd9fc2__sample_4
generated.v preview 
module consttime_word_compare(
    input clk,
    input rst_n,
    input start,
    input [31:0] lhs,
    input [31:0] rhs,
    output reg busy,
    output reg done,
    output reg match
);

    reg [31:0] lhs_reg;
    reg [31:0] rhs_reg;
    reg [1:0] cycle_count;
    reg [3:0] byte_match;

    always @(posedge clk or negedge rst_n) begin
        if (!rst_n) begin
            busy <= 0;
            done <= 0;
            match <= 0;
            cycle_count <= 0;
            byte_match <= 0;
        end else begin
            if (start && !busy) begin
                lhs_reg <= lhs;
                rhs_reg <= rhs;
                busy <= 1;
                done <= 0;
                cycle_count <= 0;
                byte_match <= 0;
            end else if (busy) begin
...
functional details 
[stdout]
ERROR (equal words): match=0 expected=1
ERROR (return to idle): busy=1 expected=0
ERROR (mismatch byte0): done=1 expected=0
ERROR (mismatch byte0): done=0 expected=1
ERROR (return to idle): busy=1 expected=0
ERROR (accept request): done=1 expected=0
ERROR (return to idle): busy=1 expected=0
ERROR (ignore busy start progress): done=1 expected=0
ERROR (ignore busy start result): done=0 expected=1
ERROR (ignore busy start result): match=0 expected=1
ERROR (idle after ignored start): busy=1 expected=0
ERROR (accept request): done=1 expected=0
ERROR (return to idle): busy=1 expected=0
TEST_FAILED
/workspace/banchmarks/11_side_channel_constant_time/task_110/tb.v:161: $finish called at 356000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (equal words): match=0 expected=1",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_4 run_20260424_230145_632624_082334 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (return to idle): busy=1 expected=0
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__11_side_channel_constant_time__task_110\samples\run_20260424_230145_632624_082334__sample_4
generated.v preview 
module consttime_word_compare(
    input clk,
    input rst_n,
    input start,
    input [31:0] lhs,
    input [31:0] rhs,
    output reg busy,
    output reg done,
    output reg match
);

    reg [31:0] lhs_reg;
    reg [31:0] rhs_reg;
    reg [1:0] cycle_count;
    reg [3:0] match_bits;

    always @(posedge clk or negedge rst_n) begin
        if (!rst_n) begin
            busy <= 0;
            done <= 0;
            match <= 0;
            cycle_count <= 0;
            match_bits <= 0;
        end else begin
            if (start && !busy) begin
                lhs_reg <= lhs;
                rhs_reg <= rhs;
                busy <= 1;
                done <= 0;
                cycle_count <= 0;
                match_bits <= 0;
            end else if (busy) begin
...
functional details 
[stdout]
ERROR (return to idle): busy=1 expected=0
ERROR (return to idle): match=1 expected=0
ERROR (accept request): match=1 expected=0
ERROR (mismatch byte0): match=1 expected=0
ERROR (mismatch byte0): done=1 expected=0
ERROR (mismatch byte0): match=1 expected=0
ERROR (mismatch byte0): match=1 expected=0
ERROR (mismatch byte0): done=0 expected=1
ERROR (mismatch byte0): match=1 expected=0
ERROR (return to idle): busy=1 expected=0
ERROR (return to idle): match=1 expected=0
ERROR (accept request): done=1 expected=0
ERROR (accept request): match=1 expected=0
ERROR (mismatch byte2): match=1 expected=0
ERROR (mismatch byte2): match=1 expected=0
ERROR (mismatch byte2): match=1 expected=0
ERROR (mismatch byte2): match=1 expected=0
ERROR (return to idle): busy=1 expected=0
ERROR (return to idle): match=1 expected=0
ERROR (accept request): match=1 expected=0
ERROR (ignore busy start): match=1 expected=0
ERROR (ignore busy start progress): done=1 expected=0
ERROR (ignore busy start progress): match=1 expected=0
ERROR (ignore busy start progress): match=1 expected=0
ERROR (ignore busy start result): done=0 expected=1
ERROR (idle after ignored start): busy=1 expected=0
ERROR (idle after ignored start): match=1 expected=0
ERROR (accept request): done=1 expected=0
ERROR (accept request): match=1 expected=0
ERROR (mid-transaction before reset): match=1 expected=0
ERROR (final mismatch): match=1 expected=0
...
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (return to idle): busy=1 expected=0",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_4 run_20260426_141859_833435_7c9834 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (equal words): match=0 expected=1
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__11_side_channel_constant_time__task_110\samples\run_20260426_141859_833435_7c9834__sample_4
generated.v preview 
module consttime_word_compare(
    input clk,
    input rst_n,
    input start,
    input [31:0] lhs,
    input [31:0] rhs,
    output reg busy,
    output reg done,
    output reg match
);

    reg [31:0] lhs_reg;
    reg [31:0] rhs_reg;
    reg [1:0] cycle_count;
    reg [3:0] byte_match;

    always @(posedge clk or negedge rst_n) begin
        if (!rst_n) begin
            busy <= 0;
            done <= 0;
            match <= 0;
            cycle_count <= 0;
            byte_match <= 0;
        end else begin
            if (start && !busy) begin
                lhs_reg <= lhs;
                rhs_reg <= rhs;
                busy <= 1;
                done <= 0;
                cycle_count <= 0;
                byte_match <= 0;
            end else if (busy) begin
...
functional details 
[stdout]
ERROR (equal words): match=0 expected=1
ERROR (return to idle): busy=1 expected=0
ERROR (mismatch byte0): done=1 expected=0
ERROR (mismatch byte0): done=0 expected=1
ERROR (return to idle): busy=1 expected=0
ERROR (accept request): done=1 expected=0
ERROR (return to idle): busy=1 expected=0
ERROR (ignore busy start progress): done=1 expected=0
ERROR (ignore busy start result): done=0 expected=1
ERROR (ignore busy start result): match=0 expected=1
ERROR (idle after ignored start): busy=1 expected=0
ERROR (accept request): done=1 expected=0
ERROR (return to idle): busy=1 expected=0
TEST_FAILED
/workspace/banchmarks/pashencev/11_side_channel_constant_time/task_110/tb.v:161: $finish called at 356000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (equal words): match=0 expected=1",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_5 run_20260424_172135_562392_bd9fc2 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (equal words): match=0 expected=1
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__11_side_channel_constant_time__task_110\samples\run_20260424_172135_562392_bd9fc2__sample_5
generated.v preview 
module consttime_word_compare(
    input clk,
    input rst_n,
    input start,
    input [31:0] lhs,
    input [31:0] rhs,
    output reg busy,
    output reg done,
    output reg match
);

    reg [31:0] lhs_reg;
    reg [31:0] rhs_reg;
    reg [1:0] cycle_count;
    reg [3:0] byte_match;

    always @(posedge clk or negedge rst_n) begin
        if (!rst_n) begin
            busy <= 0;
            done <= 0;
            match <= 0;
            cycle_count <= 0;
            byte_match <= 0;
        end else begin
            if (start && !busy) begin
                lhs_reg <= lhs;
                rhs_reg <= rhs;
                busy <= 1;
                done <= 0;
                cycle_count <= 0;
                byte_match <= 0;
            end else if (busy) begin
...
functional details 
[stdout]
ERROR (equal words): match=0 expected=1
ERROR (return to idle): busy=1 expected=0
ERROR (return to idle): done=1 expected=0
ERROR (accept request): done=1 expected=0
ERROR (mismatch byte0): done=1 expected=0
ERROR (mismatch byte0): done=1 expected=0
ERROR (mismatch byte0): match=1 expected=0
ERROR (mismatch byte0): done=1 expected=0
ERROR (mismatch byte0): match=1 expected=0
ERROR (mismatch byte0): match=1 expected=0
ERROR (return to idle): busy=1 expected=0
ERROR (return to idle): done=1 expected=0
ERROR (return to idle): match=1 expected=0
ERROR (accept request): done=1 expected=0
ERROR (accept request): match=1 expected=0
ERROR (mismatch byte2): done=1 expected=0
ERROR (mismatch byte2): match=1 expected=0
ERROR (mismatch byte2): done=1 expected=0
ERROR (mismatch byte2): match=1 expected=0
ERROR (mismatch byte2): done=1 expected=0
ERROR (mismatch byte2): match=1 expected=0
ERROR (mismatch byte2): match=1 expected=0
ERROR (return to idle): busy=1 expected=0
ERROR (return to idle): done=1 expected=0
ERROR (return to idle): match=1 expected=0
ERROR (accept request): done=1 expected=0
ERROR (accept request): match=1 expected=0
ERROR (ignore busy start): done=1 expected=0
ERROR (ignore busy start): match=1 expected=0
ERROR (ignore busy start progress): done=1 expected=0
ERROR (ignore busy start progress): match=1 expected=0
...
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (equal words): match=0 expected=1",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_5 run_20260424_230145_632624_082334 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (equal words): match=0 expected=1
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__11_side_channel_constant_time__task_110\samples\run_20260424_230145_632624_082334__sample_5
generated.v preview 
module consttime_word_compare(
    input clk,
    input rst_n,
    input start,
    input [31:0] lhs,
    input [31:0] rhs,
    output reg busy,
    output reg done,
    output reg match
);

    reg [31:0] lhs_reg;
    reg [31:0] rhs_reg;
    reg [1:0] cycle_count;
    reg [3:0] byte_match;

    always @(posedge clk or negedge rst_n) begin
        if (!rst_n) begin
            busy <= 0;
            done <= 0;
            match <= 0;
            cycle_count <= 0;
            byte_match <= 0;
        end else begin
            if (start && !busy) begin
                lhs_reg <= lhs;
                rhs_reg <= rhs;
                busy <= 1;
                done <= 0;
                cycle_count <= 0;
                byte_match <= 0;
            end else if (busy) begin
...
functional details 
[stdout]
ERROR (equal words): match=0 expected=1
ERROR (return to idle): busy=1 expected=0
ERROR (mismatch byte0): done=1 expected=0
ERROR (mismatch byte0): done=0 expected=1
ERROR (return to idle): busy=1 expected=0
ERROR (accept request): done=1 expected=0
ERROR (return to idle): busy=1 expected=0
ERROR (ignore busy start progress): done=1 expected=0
ERROR (ignore busy start result): done=0 expected=1
ERROR (ignore busy start result): match=0 expected=1
ERROR (idle after ignored start): busy=1 expected=0
ERROR (accept request): done=1 expected=0
ERROR (return to idle): busy=1 expected=0
TEST_FAILED
/workspace/banchmarks/pashencev/11_side_channel_constant_time/task_110/tb.v:161: $finish called at 356000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (equal words): match=0 expected=1",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_5 run_20260426_141859_833435_7c9834 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (equal words): match=0 expected=1
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__11_side_channel_constant_time__task_110\samples\run_20260426_141859_833435_7c9834__sample_5
generated.v preview 
module consttime_word_compare(
    input clk,
    input rst_n,
    input start,
    input [31:0] lhs,
    input [31:0] rhs,
    output reg busy,
    output reg done,
    output reg match
);

    reg [31:0] lhs_reg;
    reg [31:0] rhs_reg;
    reg [1:0] cycle_count;
    reg [3:0] byte_match;

    always @(posedge clk or negedge rst_n) begin
        if (!rst_n) begin
            busy <= 0;
            done <= 0;
            match <= 0;
            cycle_count <= 0;
            byte_match <= 0;
        end else begin
            if (start && !busy) begin
                lhs_reg <= lhs;
                rhs_reg <= rhs;
                busy <= 1;
                done <= 0;
                cycle_count <= 0;
                byte_match <= 0;
            end else if (busy) begin
...
functional details 
[stdout]
ERROR (equal words): match=0 expected=1
ERROR (return to idle): busy=1 expected=0
ERROR (mismatch byte0): done=1 expected=0
ERROR (mismatch byte0): done=0 expected=1
ERROR (return to idle): busy=1 expected=0
ERROR (accept request): done=1 expected=0
ERROR (return to idle): busy=1 expected=0
ERROR (ignore busy start progress): done=1 expected=0
ERROR (ignore busy start result): done=0 expected=1
ERROR (ignore busy start result): match=0 expected=1
ERROR (idle after ignored start): busy=1 expected=0
ERROR (accept request): done=1 expected=0
ERROR (return to idle): busy=1 expected=0
TEST_FAILED
/workspace/banchmarks/pashencev/11_side_channel_constant_time/task_110/tb.v:161: $finish called at 356000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (equal words): match=0 expected=1",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_6 run_20260424_172135_562392_bd9fc2 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (equal words): match=0 expected=1
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__11_side_channel_constant_time__task_110\samples\run_20260424_172135_562392_bd9fc2__sample_6
generated.v preview 
module consttime_word_compare(
    input clk,
    input rst_n,
    input start,
    input [31:0] lhs,
    input [31:0] rhs,
    output reg busy,
    output reg done,
    output reg match
);

    reg [31:0] lhs_reg;
    reg [31:0] rhs_reg;
    reg [1:0] cycle_count;
    reg [3:0] byte_match;

    always @(posedge clk or negedge rst_n) begin
        if (!rst_n) begin
            busy <= 0;
            done <= 0;
            match <= 0;
            cycle_count <= 0;
            byte_match <= 0;
        end else begin
            if (start && !busy) begin
                lhs_reg <= lhs;
                rhs_reg <= rhs;
                busy <= 1;
                done <= 0;
                cycle_count <= 0;
                byte_match <= 0;
            end else if (busy) begin
...
functional details 
[stdout]
ERROR (equal words): match=0 expected=1
ERROR (return to idle): busy=1 expected=0
ERROR (mismatch byte0): done=1 expected=0
ERROR (mismatch byte0): done=0 expected=1
ERROR (return to idle): busy=1 expected=0
ERROR (accept request): done=1 expected=0
ERROR (return to idle): busy=1 expected=0
ERROR (ignore busy start progress): done=1 expected=0
ERROR (ignore busy start result): done=0 expected=1
ERROR (ignore busy start result): match=0 expected=1
ERROR (idle after ignored start): busy=1 expected=0
ERROR (accept request): done=1 expected=0
ERROR (return to idle): busy=1 expected=0
TEST_FAILED
/workspace/banchmarks/11_side_channel_constant_time/task_110/tb.v:161: $finish called at 356000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (equal words): match=0 expected=1",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_6 run_20260424_230145_632624_082334 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (equal words): match=0 expected=1
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__11_side_channel_constant_time__task_110\samples\run_20260424_230145_632624_082334__sample_6
generated.v preview 
module consttime_word_compare(
    input clk,
    input rst_n,
    input start,
    input [31:0] lhs,
    input [31:0] rhs,
    output reg busy,
    output reg done,
    output reg match
);

    reg [31:0] lhs_reg;
    reg [31:0] rhs_reg;
    reg [1:0] cycle_count;
    reg [3:0] byte_match;

    always @(posedge clk or negedge rst_n) begin
        if (!rst_n) begin
            busy <= 0;
            done <= 0;
            match <= 0;
            cycle_count <= 0;
            byte_match <= 0;
        end else begin
            if (start && !busy) begin
                lhs_reg <= lhs;
                rhs_reg <= rhs;
                busy <= 1;
                done <= 0;
                cycle_count <= 0;
                byte_match <= 0;
            end else if (busy) begin
...
functional details 
[stdout]
ERROR (equal words): match=0 expected=1
ERROR (return to idle): busy=1 expected=0
ERROR (return to idle): done=1 expected=0
ERROR (accept request): done=1 expected=0
ERROR (mismatch byte0): done=1 expected=0
ERROR (mismatch byte0): done=1 expected=0
ERROR (mismatch byte0): match=1 expected=0
ERROR (mismatch byte0): done=1 expected=0
ERROR (mismatch byte0): match=1 expected=0
ERROR (mismatch byte0): match=1 expected=0
ERROR (return to idle): busy=1 expected=0
ERROR (return to idle): done=1 expected=0
ERROR (return to idle): match=1 expected=0
ERROR (accept request): done=1 expected=0
ERROR (accept request): match=1 expected=0
ERROR (mismatch byte2): done=1 expected=0
ERROR (mismatch byte2): match=1 expected=0
ERROR (mismatch byte2): done=1 expected=0
ERROR (mismatch byte2): match=1 expected=0
ERROR (mismatch byte2): done=1 expected=0
ERROR (mismatch byte2): match=1 expected=0
ERROR (mismatch byte2): match=1 expected=0
ERROR (return to idle): busy=1 expected=0
ERROR (return to idle): done=1 expected=0
ERROR (return to idle): match=1 expected=0
ERROR (accept request): done=1 expected=0
ERROR (accept request): match=1 expected=0
ERROR (ignore busy start): done=1 expected=0
ERROR (ignore busy start): match=1 expected=0
ERROR (ignore busy start progress): done=1 expected=0
ERROR (ignore busy start progress): match=1 expected=0
...
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (equal words): match=0 expected=1",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_6 run_20260426_141859_833435_7c9834 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (equal words): match=0 expected=1
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__11_side_channel_constant_time__task_110\samples\run_20260426_141859_833435_7c9834__sample_6
generated.v preview 
module consttime_word_compare(
    input clk,
    input rst_n,
    input start,
    input [31:0] lhs,
    input [31:0] rhs,
    output reg busy,
    output reg done,
    output reg match
);

    reg [31:0] lhs_reg;
    reg [31:0] rhs_reg;
    reg [1:0] cycle_count;
    reg [3:0] byte_match;

    always @(posedge clk or negedge rst_n) begin
        if (!rst_n) begin
            busy <= 0;
            done <= 0;
            match <= 0;
            cycle_count <= 0;
            byte_match <= 0;
        end else begin
            if (start && !busy) begin
                lhs_reg <= lhs;
                rhs_reg <= rhs;
                busy <= 1;
                done <= 0;
                cycle_count <= 0;
                byte_match <= 0;
            end else if (busy) begin
...
functional details 
[stdout]
ERROR (equal words): match=0 expected=1
ERROR (return to idle): busy=1 expected=0
ERROR (return to idle): done=1 expected=0
ERROR (accept request): done=1 expected=0
ERROR (mismatch byte0): done=1 expected=0
ERROR (mismatch byte0): done=1 expected=0
ERROR (mismatch byte0): match=1 expected=0
ERROR (mismatch byte0): done=1 expected=0
ERROR (mismatch byte0): match=1 expected=0
ERROR (mismatch byte0): match=1 expected=0
ERROR (return to idle): busy=1 expected=0
ERROR (return to idle): done=1 expected=0
ERROR (return to idle): match=1 expected=0
ERROR (accept request): done=1 expected=0
ERROR (accept request): match=1 expected=0
ERROR (mismatch byte2): done=1 expected=0
ERROR (mismatch byte2): match=1 expected=0
ERROR (mismatch byte2): done=1 expected=0
ERROR (mismatch byte2): match=1 expected=0
ERROR (mismatch byte2): done=1 expected=0
ERROR (mismatch byte2): match=1 expected=0
ERROR (mismatch byte2): match=1 expected=0
ERROR (return to idle): busy=1 expected=0
ERROR (return to idle): done=1 expected=0
ERROR (return to idle): match=1 expected=0
ERROR (accept request): done=1 expected=0
ERROR (accept request): match=1 expected=0
ERROR (ignore busy start): done=1 expected=0
ERROR (ignore busy start): match=1 expected=0
ERROR (ignore busy start progress): done=1 expected=0
ERROR (ignore busy start progress): match=1 expected=0
...
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (equal words): match=0 expected=1",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_7 run_20260424_172135_562392_bd9fc2 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (equal words): busy=0 expected=1
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__11_side_channel_constant_time__task_110\samples\run_20260424_172135_562392_bd9fc2__sample_7
generated.v preview 
module consttime_word_compare(
    input clk,
    input rst_n,
    input start,
    input [31:0] lhs,
    input [31:0] rhs,
    output reg busy,
    output reg done,
    output reg match
);

    reg [31:0] lhs_reg;
    reg [31:0] rhs_reg;
    reg [1:0] cycle_count;
    reg [3:0] byte_match;

    always @(posedge clk or negedge rst_n) begin
        if (!rst_n) begin
            busy <= 0;
            done <= 0;
            match <= 0;
            cycle_count <= 0;
            byte_match <= 0;
        end else begin
            if (start && !busy) begin
                lhs_reg <= lhs;
                rhs_reg <= rhs;
                busy <= 1;
                done <= 0;
                cycle_count <= 0;
                byte_match <= 0;
            end else if (busy) begin
...
functional details 
[stdout]
ERROR (equal words): busy=0 expected=1
ERROR (equal words): done=0 expected=1
ERROR (equal words): match=0 expected=1
ERROR (mismatch byte0): busy=0 expected=1
ERROR (mismatch byte0): done=0 expected=1
ERROR (mismatch byte2): busy=0 expected=1
ERROR (mismatch byte2): done=0 expected=1
ERROR (ignore busy start result): busy=0 expected=1
ERROR (ignore busy start result): done=0 expected=1
ERROR (ignore busy start result): match=0 expected=1
ERROR (final mismatch): busy=0 expected=1
ERROR (final mismatch): done=0 expected=1
TEST_FAILED
/workspace/banchmarks/11_side_channel_constant_time/task_110/tb.v:161: $finish called at 356000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (equal words): busy=0 expected=1",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_7 run_20260424_230145_632624_082334 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (equal words): match=0 expected=1
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__11_side_channel_constant_time__task_110\samples\run_20260424_230145_632624_082334__sample_7
generated.v preview 
module consttime_word_compare(
    input clk,
    input rst_n,
    input start,
    input [31:0] lhs,
    input [31:0] rhs,
    output reg busy,
    output reg done,
    output reg match
);

    reg [31:0] lhs_reg;
    reg [31:0] rhs_reg;
    reg [1:0] cycle_count;
    reg [3:0] byte_match;

    always @(posedge clk or negedge rst_n) begin
        if (!rst_n) begin
            busy <= 0;
            done <= 0;
            match <= 0;
            cycle_count <= 0;
            byte_match <= 0;
        end else begin
            if (start && !busy) begin
                lhs_reg <= lhs;
                rhs_reg <= rhs;
                busy <= 1;
                done <= 0;
                cycle_count <= 0;
                byte_match <= 0;
            end else if (busy) begin
...
functional details 
[stdout]
ERROR (equal words): match=0 expected=1
ERROR (return to idle): busy=1 expected=0
ERROR (return to idle): done=1 expected=0
ERROR (accept request): done=1 expected=0
ERROR (mismatch byte0): done=1 expected=0
ERROR (mismatch byte0): done=1 expected=0
ERROR (mismatch byte0): match=1 expected=0
ERROR (mismatch byte0): done=1 expected=0
ERROR (mismatch byte0): match=1 expected=0
ERROR (mismatch byte0): match=1 expected=0
ERROR (return to idle): busy=1 expected=0
ERROR (return to idle): done=1 expected=0
ERROR (return to idle): match=1 expected=0
ERROR (accept request): done=1 expected=0
ERROR (accept request): match=1 expected=0
ERROR (mismatch byte2): done=1 expected=0
ERROR (mismatch byte2): match=1 expected=0
ERROR (mismatch byte2): done=1 expected=0
ERROR (mismatch byte2): match=1 expected=0
ERROR (mismatch byte2): done=1 expected=0
ERROR (mismatch byte2): match=1 expected=0
ERROR (mismatch byte2): match=1 expected=0
ERROR (return to idle): busy=1 expected=0
ERROR (return to idle): done=1 expected=0
ERROR (return to idle): match=1 expected=0
ERROR (accept request): done=1 expected=0
ERROR (accept request): match=1 expected=0
ERROR (ignore busy start): done=1 expected=0
ERROR (ignore busy start): match=1 expected=0
ERROR (ignore busy start progress): done=1 expected=0
ERROR (ignore busy start progress): match=1 expected=0
...
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (equal words): match=0 expected=1",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_7 run_20260426_141859_833435_7c9834 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (equal words): match=0 expected=1
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__11_side_channel_constant_time__task_110\samples\run_20260426_141859_833435_7c9834__sample_7
generated.v preview 
module consttime_word_compare(
    input clk,
    input rst_n,
    input start,
    input [31:0] lhs,
    input [31:0] rhs,
    output reg busy,
    output reg done,
    output reg match
);

    reg [31:0] lhs_reg;
    reg [31:0] rhs_reg;
    reg [1:0] cycle_count;
    reg [3:0] byte_match;

    always @(posedge clk or negedge rst_n) begin
        if (!rst_n) begin
            busy <= 0;
            done <= 0;
            match <= 0;
            cycle_count <= 0;
            byte_match <= 0;
        end else begin
            if (start && !busy) begin
                lhs_reg <= lhs;
                rhs_reg <= rhs;
                busy <= 1;
                done <= 0;
                cycle_count <= 0;
                byte_match <= 0;
            end else if (busy) begin
...
functional details 
[stdout]
ERROR (equal words): match=0 expected=1
ERROR (return to idle): busy=1 expected=0
ERROR (mismatch byte0): done=1 expected=0
ERROR (mismatch byte0): done=0 expected=1
ERROR (return to idle): busy=1 expected=0
ERROR (accept request): done=1 expected=0
ERROR (return to idle): busy=1 expected=0
ERROR (ignore busy start progress): done=1 expected=0
ERROR (ignore busy start result): done=0 expected=1
ERROR (ignore busy start result): match=0 expected=1
ERROR (idle after ignored start): busy=1 expected=0
ERROR (accept request): done=1 expected=0
ERROR (return to idle): busy=1 expected=0
TEST_FAILED
/workspace/banchmarks/pashencev/11_side_channel_constant_time/task_110/tb.v:161: $finish called at 356000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (equal words): match=0 expected=1",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_8 run_20260424_172135_562392_bd9fc2 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (return to idle): busy=1 expected=0
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__11_side_channel_constant_time__task_110\samples\run_20260424_172135_562392_bd9fc2__sample_8
generated.v preview 
module consttime_word_compare(
    input clk,
    input rst_n,
    input start,
    input [31:0] lhs,
    input [31:0] rhs,
    output reg busy,
    output reg done,
    output reg match
);

    reg [31:0] lhs_reg;
    reg [31:0] rhs_reg;
    reg [1:0] cycle_count;
    reg [3:0] match_bits;

    always @(posedge clk or negedge rst_n) begin
        if (!rst_n) begin
            busy <= 0;
            done <= 0;
            match <= 0;
            cycle_count <= 0;
            match_bits <= 0;
        end else begin
            if (start && !busy) begin
                lhs_reg <= lhs;
                rhs_reg <= rhs;
                busy <= 1;
                done <= 0;
                cycle_count <= 0;
                match_bits <= 0;
            end else if (busy) begin
...
functional details 
[stdout]
ERROR (return to idle): busy=1 expected=0
ERROR (return to idle): match=1 expected=0
ERROR (accept request): match=1 expected=0
ERROR (mismatch byte0): match=1 expected=0
ERROR (mismatch byte0): done=1 expected=0
ERROR (mismatch byte0): match=1 expected=0
ERROR (mismatch byte0): match=1 expected=0
ERROR (mismatch byte0): done=0 expected=1
ERROR (mismatch byte0): match=1 expected=0
ERROR (return to idle): busy=1 expected=0
ERROR (return to idle): match=1 expected=0
ERROR (accept request): done=1 expected=0
ERROR (accept request): match=1 expected=0
ERROR (mismatch byte2): match=1 expected=0
ERROR (mismatch byte2): match=1 expected=0
ERROR (mismatch byte2): match=1 expected=0
ERROR (mismatch byte2): match=1 expected=0
ERROR (return to idle): busy=1 expected=0
ERROR (return to idle): match=1 expected=0
ERROR (accept request): match=1 expected=0
ERROR (ignore busy start): match=1 expected=0
ERROR (ignore busy start progress): done=1 expected=0
ERROR (ignore busy start progress): match=1 expected=0
ERROR (ignore busy start progress): match=1 expected=0
ERROR (ignore busy start result): done=0 expected=1
ERROR (idle after ignored start): busy=1 expected=0
ERROR (idle after ignored start): match=1 expected=0
ERROR (accept request): done=1 expected=0
ERROR (accept request): match=1 expected=0
ERROR (mid-transaction before reset): match=1 expected=0
ERROR (final mismatch): match=1 expected=0
...
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (return to idle): busy=1 expected=0",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_8 run_20260424_230145_632624_082334 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (equal words): match=0 expected=1
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__11_side_channel_constant_time__task_110\samples\run_20260424_230145_632624_082334__sample_8
generated.v preview 
module consttime_word_compare(
    input clk,
    input rst_n,
    input start,
    input [31:0] lhs,
    input [31:0] rhs,
    output reg busy,
    output reg done,
    output reg match
);

    reg [31:0] lhs_reg;
    reg [31:0] rhs_reg;
    reg [1:0] cycle_count;
    reg [3:0] byte_match;

    always @(posedge clk or negedge rst_n) begin
        if (!rst_n) begin
            busy <= 0;
            done <= 0;
            match <= 0;
            cycle_count <= 0;
            byte_match <= 0;
        end else begin
            if (start && !busy) begin
                lhs_reg <= lhs;
                rhs_reg <= rhs;
                busy <= 1;
                done <= 0;
                cycle_count <= 0;
                byte_match <= 0;
            end else if (busy) begin
...
functional details 
[stdout]
ERROR (equal words): match=0 expected=1
ERROR (return to idle): busy=1 expected=0
ERROR (mismatch byte0): done=1 expected=0
ERROR (mismatch byte0): done=0 expected=1
ERROR (return to idle): busy=1 expected=0
ERROR (accept request): done=1 expected=0
ERROR (return to idle): busy=1 expected=0
ERROR (ignore busy start progress): done=1 expected=0
ERROR (ignore busy start result): done=0 expected=1
ERROR (ignore busy start result): match=0 expected=1
ERROR (idle after ignored start): busy=1 expected=0
ERROR (accept request): done=1 expected=0
ERROR (return to idle): busy=1 expected=0
TEST_FAILED
/workspace/banchmarks/pashencev/11_side_channel_constant_time/task_110/tb.v:161: $finish called at 356000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (equal words): match=0 expected=1",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_8 run_20260426_141859_833435_7c9834 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (equal words): match=0 expected=1
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__11_side_channel_constant_time__task_110\samples\run_20260426_141859_833435_7c9834__sample_8
generated.v preview 
module consttime_word_compare(
    input clk,
    input rst_n,
    input start,
    input [31:0] lhs,
    input [31:0] rhs,
    output reg busy,
    output reg done,
    output reg match
);

    reg [31:0] lhs_reg;
    reg [31:0] rhs_reg;
    reg [1:0] cycle_count;
    reg [3:0] byte_match;

    always @(posedge clk or negedge rst_n) begin
        if (!rst_n) begin
            busy <= 0;
            done <= 0;
            match <= 0;
            cycle_count <= 0;
            byte_match <= 0;
        end else begin
            if (start && !busy) begin
                lhs_reg <= lhs;
                rhs_reg <= rhs;
                busy <= 1;
                done <= 0;
                cycle_count <= 0;
                byte_match <= 0;
            end else if (busy) begin
...
functional details 
[stdout]
ERROR (equal words): match=0 expected=1
ERROR (return to idle): busy=1 expected=0
ERROR (mismatch byte0): done=1 expected=0
ERROR (mismatch byte0): done=0 expected=1
ERROR (return to idle): busy=1 expected=0
ERROR (accept request): done=1 expected=0
ERROR (return to idle): busy=1 expected=0
ERROR (ignore busy start progress): done=1 expected=0
ERROR (ignore busy start result): done=0 expected=1
ERROR (ignore busy start result): match=0 expected=1
ERROR (idle after ignored start): busy=1 expected=0
ERROR (accept request): done=1 expected=0
ERROR (return to idle): busy=1 expected=0
TEST_FAILED
/workspace/banchmarks/pashencev/11_side_channel_constant_time/task_110/tb.v:161: $finish called at 356000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (equal words): match=0 expected=1",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_9 run_20260424_172135_562392_bd9fc2 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (equal words): busy=0 expected=1
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__11_side_channel_constant_time__task_110\samples\run_20260424_172135_562392_bd9fc2__sample_9
generated.v preview 
module consttime_word_compare(
    input clk,
    input rst_n,
    input start,
    input [31:0] lhs,
    input [31:0] rhs,
    output reg busy,
    output reg done,
    output reg match
);

    reg [31:0] lhs_reg;
    reg [31:0] rhs_reg;
    reg [1:0] cycle_count;
    reg [3:0] byte_match;

    always @(posedge clk or negedge rst_n) begin
        if (!rst_n) begin
            busy <= 0;
            done <= 0;
            match <= 0;
            cycle_count <= 0;
            byte_match <= 0;
        end else begin
            if (start && !busy) begin
                lhs_reg <= lhs;
                rhs_reg <= rhs;
                busy <= 1;
                done <= 0;
                cycle_count <= 0;
                byte_match <= 0;
            end else if (busy) begin
...
functional details 
[stdout]
ERROR (equal words): busy=0 expected=1
ERROR (equal words): done=0 expected=1
ERROR (equal words): match=0 expected=1
ERROR (mismatch byte0): busy=0 expected=1
ERROR (mismatch byte0): done=0 expected=1
ERROR (mismatch byte2): busy=0 expected=1
ERROR (mismatch byte2): done=0 expected=1
ERROR (ignore busy start result): busy=0 expected=1
ERROR (ignore busy start result): done=0 expected=1
ERROR (ignore busy start result): match=0 expected=1
ERROR (final mismatch): busy=0 expected=1
ERROR (final mismatch): done=0 expected=1
TEST_FAILED
/workspace/banchmarks/11_side_channel_constant_time/task_110/tb.v:161: $finish called at 356000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (equal words): busy=0 expected=1",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_9 run_20260424_230145_632624_082334 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (return to idle): busy=1 expected=0
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__11_side_channel_constant_time__task_110\samples\run_20260424_230145_632624_082334__sample_9
generated.v preview 
module consttime_word_compare(
    input clk,
    input rst_n,
    input start,
    input [31:0] lhs,
    input [31:0] rhs,
    output reg busy,
    output reg done,
    output reg match
);

    reg [31:0] lhs_reg;
    reg [31:0] rhs_reg;
    reg [1:0] cycle_count;
    reg [3:0] match_bits;

    always @(posedge clk or negedge rst_n) begin
        if (!rst_n) begin
            busy <= 0;
            done <= 0;
            match <= 0;
            cycle_count <= 0;
            match_bits <= 0;
        end else begin
            if (start && !busy) begin
                lhs_reg <= lhs;
                rhs_reg <= rhs;
                busy <= 1;
                done <= 0;
                cycle_count <= 0;
                match_bits <= 0;
            end else if (busy) begin
...
functional details 
[stdout]
ERROR (return to idle): busy=1 expected=0
ERROR (return to idle): match=1 expected=0
ERROR (accept request): match=1 expected=0
ERROR (mismatch byte0): match=1 expected=0
ERROR (mismatch byte0): done=1 expected=0
ERROR (mismatch byte0): match=1 expected=0
ERROR (mismatch byte0): match=1 expected=0
ERROR (mismatch byte0): done=0 expected=1
ERROR (mismatch byte0): match=1 expected=0
ERROR (return to idle): busy=1 expected=0
ERROR (return to idle): match=1 expected=0
ERROR (accept request): done=1 expected=0
ERROR (accept request): match=1 expected=0
ERROR (mismatch byte2): match=1 expected=0
ERROR (mismatch byte2): match=1 expected=0
ERROR (mismatch byte2): match=1 expected=0
ERROR (mismatch byte2): match=1 expected=0
ERROR (return to idle): busy=1 expected=0
ERROR (return to idle): match=1 expected=0
ERROR (accept request): match=1 expected=0
ERROR (ignore busy start): match=1 expected=0
ERROR (ignore busy start progress): done=1 expected=0
ERROR (ignore busy start progress): match=1 expected=0
ERROR (ignore busy start progress): match=1 expected=0
ERROR (ignore busy start result): done=0 expected=1
ERROR (idle after ignored start): busy=1 expected=0
ERROR (idle after ignored start): match=1 expected=0
ERROR (accept request): done=1 expected=0
ERROR (accept request): match=1 expected=0
ERROR (mid-transaction before reset): match=1 expected=0
ERROR (final mismatch): match=1 expected=0
...
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (return to idle): busy=1 expected=0",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_9 run_20260426_141859_833435_7c9834 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (equal words): busy=0 expected=1
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__11_side_channel_constant_time__task_110\samples\run_20260426_141859_833435_7c9834__sample_9
generated.v preview 
module consttime_word_compare(
    input clk,
    input rst_n,
    input start,
    input [31:0] lhs,
    input [31:0] rhs,
    output reg busy,
    output reg done,
    output reg match
);

    reg [31:0] lhs_reg;
    reg [31:0] rhs_reg;
    reg [1:0] cycle_count;
    reg [3:0] byte_match;

    always @(posedge clk or negedge rst_n) begin
        if (!rst_n) begin
            busy <= 0;
            done <= 0;
            match <= 0;
            cycle_count <= 0;
            byte_match <= 0;
        end else begin
            if (start && !busy) begin
                lhs_reg <= lhs;
                rhs_reg <= rhs;
                busy <= 1;
                done <= 0;
                cycle_count <= 0;
                byte_match <= 0;
            end else if (busy) begin
...
functional details 
[stdout]
ERROR (equal words): busy=0 expected=1
ERROR (equal words): done=0 expected=1
ERROR (equal words): match=0 expected=1
ERROR (mismatch byte0): busy=0 expected=1
ERROR (mismatch byte0): done=0 expected=1
ERROR (mismatch byte2): busy=0 expected=1
ERROR (mismatch byte2): done=0 expected=1
ERROR (ignore busy start result): busy=0 expected=1
ERROR (ignore busy start result): done=0 expected=1
ERROR (ignore busy start result): match=0 expected=1
ERROR (final mismatch): busy=0 expected=1
ERROR (final mismatch): done=0 expected=1
TEST_FAILED
/workspace/banchmarks/pashencev/11_side_channel_constant_time/task_110/tb.v:161: $finish called at 356000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (equal words): busy=0 expected=1",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_10 run_20260424_172135_562392_bd9fc2 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (equal words): busy=0 expected=1
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__11_side_channel_constant_time__task_110\samples\run_20260424_172135_562392_bd9fc2__sample_10
generated.v preview 
module consttime_word_compare(
    input clk,
    input rst_n,
    input start,
    input [31:0] lhs,
    input [31:0] rhs,
    output reg busy,
    output reg done,
    output reg match
);

    reg [31:0] lhs_reg;
    reg [31:0] rhs_reg;
    reg [1:0] cycle_count;
    reg [3:0] byte_match;

    always @(posedge clk or negedge rst_n) begin
        if (!rst_n) begin
            busy <= 0;
            done <= 0;
            match <= 0;
            cycle_count <= 0;
            byte_match <= 0;
        end else begin
            if (start && !busy) begin
                lhs_reg <= lhs;
                rhs_reg <= rhs;
                busy <= 1;
                done <= 0;
                cycle_count <= 0;
                byte_match <= 0;
            end else if (busy) begin
...
functional details 
[stdout]
ERROR (equal words): busy=0 expected=1
ERROR (equal words): match=0 expected=1
ERROR (mismatch byte0): busy=0 expected=1
ERROR (mismatch byte2): busy=0 expected=1
ERROR (ignore busy start result): busy=0 expected=1
ERROR (ignore busy start result): match=0 expected=1
ERROR (final mismatch): busy=0 expected=1
TEST_FAILED
/workspace/banchmarks/11_side_channel_constant_time/task_110/tb.v:161: $finish called at 356000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (equal words): busy=0 expected=1",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_10 run_20260424_230145_632624_082334 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (equal words): busy=0 expected=1
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__11_side_channel_constant_time__task_110\samples\run_20260424_230145_632624_082334__sample_10
generated.v preview 
module consttime_word_compare(
    input clk,
    input rst_n,
    input start,
    input [31:0] lhs,
    input [31:0] rhs,
    output reg busy,
    output reg done,
    output reg match
);

    reg [31:0] lhs_reg;
    reg [31:0] rhs_reg;
    reg [1:0] cycle_count;
    reg [3:0] byte_match;

    always @(posedge clk or negedge rst_n) begin
        if (!rst_n) begin
            busy <= 0;
            done <= 0;
            match <= 0;
            cycle_count <= 0;
            byte_match <= 0;
        end else begin
            if (start && !busy) begin
                lhs_reg <= lhs;
                rhs_reg <= rhs;
                busy <= 1;
                done <= 0;
                cycle_count <= 0;
                byte_match <= 0;
            end else if (busy) begin
...
functional details 
[stdout]
ERROR (equal words): busy=0 expected=1
ERROR (equal words): done=0 expected=1
ERROR (equal words): match=0 expected=1
ERROR (mismatch byte0): busy=0 expected=1
ERROR (mismatch byte0): done=0 expected=1
ERROR (mismatch byte2): busy=0 expected=1
ERROR (mismatch byte2): done=0 expected=1
ERROR (ignore busy start result): busy=0 expected=1
ERROR (ignore busy start result): done=0 expected=1
ERROR (ignore busy start result): match=0 expected=1
ERROR (final mismatch): busy=0 expected=1
ERROR (final mismatch): done=0 expected=1
TEST_FAILED
/workspace/banchmarks/pashencev/11_side_channel_constant_time/task_110/tb.v:161: $finish called at 356000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (equal words): busy=0 expected=1",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_10 run_20260426_141859_833435_7c9834 ok ok failed failed failed functional Functional output contains failure marker: TEST_FAILED. ERROR (equal words): busy=0 expected=1
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\ilyasov\tasks\ilyasov__11_side_channel_constant_time__task_110\samples\run_20260426_141859_833435_7c9834__sample_10
generated.v preview 
module consttime_word_compare(
    input clk,
    input rst_n,
    input start,
    input [31:0] lhs,
    input [31:0] rhs,
    output reg busy,
    output reg done,
    output reg match
);

    reg [31:0] lhs_reg;
    reg [31:0] rhs_reg;
    reg [1:0] cycle_count;
    reg [3:0] byte_match;

    always @(posedge clk or negedge rst_n) begin
        if (!rst_n) begin
            busy <= 0;
            done <= 0;
            match <= 0;
            cycle_count <= 0;
            byte_match <= 0;
        end else begin
            if (start && !busy) begin
                lhs_reg <= lhs;
                rhs_reg <= rhs;
                busy <= 1;
                done <= 0;
                cycle_count <= 0;
                byte_match <= 0;
            end else if (busy) begin
...
functional details 
[stdout]
ERROR (equal words): busy=0 expected=1
ERROR (equal words): done=0 expected=1
ERROR (equal words): match=0 expected=1
ERROR (mismatch byte0): busy=0 expected=1
ERROR (mismatch byte0): done=0 expected=1
ERROR (mismatch byte2): busy=0 expected=1
ERROR (mismatch byte2): done=0 expected=1
ERROR (ignore busy start result): busy=0 expected=1
ERROR (ignore busy start result): done=0 expected=1
ERROR (ignore busy start result): match=0 expected=1
ERROR (final mismatch): busy=0 expected=1
ERROR (final mismatch): done=0 expected=1
TEST_FAILED
/workspace/banchmarks/pashencev/11_side_channel_constant_time/task_110/tb.v:161: $finish called at 356000 (1ps)
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.output_failed_marker",
    "message": "Functional output contains failure marker: TEST_FAILED. ERROR (equal words): busy=0 expected=1",
    "retryable": false,
    "details": {
      "marker": "TEST_FAILED"
    }
  },
  {
    "stage": "openlane",
    "code": "openlane.invalidated_by_functional_failure",
    "message": "OpenLane result invalidated because functional validation failed after output-marker correction",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}