Назад к моделям Назад к профилю модели

qwen3-coder:30b | RAG on

13_rtllm_miscellaneous / task_07 | verified_parallel2serial

benchmarkrtllm
task_idrtllm/13_rtllm_miscellaneous/task_07
samples_total31
final_success_samples0
final_success_rate_samples0.0%
functional_pass_rate_samples0.0%
synth_pass_rate_samples0.0%
source_runsrun_20260424_203453_201510_6e98ce, run_20260424_212142_473417_af1ca5, run_20260424_230145_632624_082334, run_20260426_141859_833435_7c9834

Что показывает эта страница

Здесь перечислены все реальные попытки этой модели на одной задаче. По каждой попытке можно увидеть, до какой стадии она дошла, где именно сломалась и какое сообщение об ошибке вернулось из syntax, functional или synthesis.

Samples

sample run extract_ok syntax_ok functional_ok openlane_ok final_success failure_stage failure_reason details
sample_1 run_20260424_203453_201510_6e98ce ok ok failed skipped failed functional /workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_07\samples\run_20260424_203453_201510_6e98ce__sample_1
generated.v preview 
module verified_parallel2serial(
    input clk,
    input rst_n,
    input [3:0] d,
    output reg valid_out,
    output reg dout
);

reg [3:0] data;
reg [1:0] cnt;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        data <= 4'b0000;
        cnt <= 2'b00;
        valid_out <= 1'b0;
        dout <= 1'b0;
    end else begin
        if (cnt == 2'd3) begin
            data <= d;
            cnt <= 2'b00;
            valid_out <= 1'b1;
            dout <= d[3];
        end else begin
            cnt <= cnt + 1'b1;
            valid_out <= 1'b0;
            dout <= data[3];
            data <= data << 1;
        end
    end
end
...
functional details 
[stderr]
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
3 error(s) during elaboration.
*** These modules were missing:
        parallel2serial referenced 1 times.
***
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial\n3 error(s) during elaboration.\n*** These modules were missing:\n        parallel2serial referenced 1 times.\n***\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_1 run_20260424_212142_473417_af1ca5 ok ok failed skipped failed functional /workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_07\samples\run_20260424_212142_473417_af1ca5__sample_1
generated.v preview 
module verified_parallel2serial(
    input clk,
    input rst_n,
    input [3:0] d,
    output reg valid_out,
    output reg dout
);

reg [3:0] data;
reg [1:0] cnt;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        data <= 4'b0000;
        cnt <= 2'b00;
        valid_out <= 1'b0;
        dout <= 1'b0;
    end else begin
        if (cnt == 2'b11) begin
            data <= d;
            cnt <= 2'b00;
            valid_out <= 1'b1;
            dout <= d[3];
        end else begin
            cnt <= cnt + 1;
            valid_out <= 1'b0;
            data <= {data[2:0], 1'b0};
            dout <= data[3];
        end
    end
end
...
functional details 
[stderr]
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
3 error(s) during elaboration.
*** These modules were missing:
        parallel2serial referenced 1 times.
***
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial\n3 error(s) during elaboration.\n*** These modules were missing:\n        parallel2serial referenced 1 times.\n***\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_1 run_20260424_230145_632624_082334 ok ok failed skipped failed functional /workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_07\samples\run_20260424_230145_632624_082334__sample_1
generated.v preview 
module verified_parallel2serial(
    input clk,
    input rst_n,
    input [3:0] d,
    output reg valid_out,
    output reg dout
);

reg [3:0] data;
reg [1:0] cnt;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        data <= 4'b0000;
        cnt <= 2'b00;
        valid_out <= 1'b0;
        dout <= 1'b0;
    end else begin
        if (cnt == 2'b11) begin
            data <= d;
            cnt <= 2'b00;
            valid_out <= 1'b1;
            dout <= d[3];
        end else begin
            cnt <= cnt + 1'b1;
            valid_out <= 1'b0;
            dout <= data[3];
            data <= data << 1;
        end
    end
end
...
functional details 
[stderr]
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
3 error(s) during elaboration.
*** These modules were missing:
        parallel2serial referenced 1 times.
***
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial\n3 error(s) during elaboration.\n*** These modules were missing:\n        parallel2serial referenced 1 times.\n***\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_1 run_20260426_141859_833435_7c9834 ok ok failed skipped failed functional /workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_07\samples\run_20260426_141859_833435_7c9834__sample_1
generated.v preview 
module verified_parallel2serial(
    input clk,
    input rst_n,
    input [3:0] d,
    output reg valid_out,
    output reg dout
);

reg [3:0] data;
reg [1:0] cnt;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        data <= 4'b0000;
        cnt <= 2'b00;
        valid_out <= 1'b0;
        dout <= 1'b0;
    end else begin
        if (cnt == 2'b11) begin
            data <= d;
            cnt <= 2'b00;
            valid_out <= 1'b1;
            dout <= d[3];
        end else begin
            cnt <= cnt + 1;
            valid_out <= 1'b0;
            data <= {data[2:0], 1'b0};
            dout <= data[3];
        end
    end
end
...
functional details 
[stderr]
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
3 error(s) during elaboration.
*** These modules were missing:
        parallel2serial referenced 1 times.
***
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial\n3 error(s) during elaboration.\n*** These modules were missing:\n        parallel2serial referenced 1 times.\n***\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_2 run_20260424_203453_201510_6e98ce ok ok failed skipped failed functional /workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_07\samples\run_20260424_203453_201510_6e98ce__sample_2
generated.v preview 
module verified_parallel2serial(
    input clk,
    input rst_n,
    input [3:0] d,
    output reg valid_out,
    output reg dout
);

reg [3:0] data;
reg [1:0] cnt;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        data <= 4'b0000;
        cnt <= 2'b00;
        valid_out <= 1'b0;
        dout <= 1'b0;
    end else begin
        if (cnt == 2'd3) begin
            data <= d;
            cnt <= 2'd0;
            valid_out <= 1'b1;
            dout <= d[3];
        end else begin
            cnt <= cnt + 1'b1;
            valid_out <= 1'b0;
            data <= {data[2:0], 1'b0};
            dout <= data[3];
        end
    end
end
...
functional details 
[stderr]
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
3 error(s) during elaboration.
*** These modules were missing:
        parallel2serial referenced 1 times.
***
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial\n3 error(s) during elaboration.\n*** These modules were missing:\n        parallel2serial referenced 1 times.\n***\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_2 run_20260424_230145_632624_082334 ok ok failed skipped failed functional /workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_07\samples\run_20260424_230145_632624_082334__sample_2
generated.v preview 
module verified_parallel2serial(
    input clk,
    input rst_n,
    input [3:0] d,
    output reg valid_out,
    output reg dout
);

reg [3:0] data;
reg [1:0] cnt;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        data <= 4'b0000;
        cnt <= 2'b00;
        valid_out <= 1'b0;
        dout <= 1'b0;
    end else begin
        if (cnt == 2'b11) begin
            data <= d;
            cnt <= 2'b00;
            valid_out <= 1'b1;
            dout <= d[3];
        end else begin
            cnt <= cnt + 1'b1;
            valid_out <= 1'b0;
            dout <= data[3];
            data <= data << 1;
        end
    end
end
...
functional details 
[stderr]
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
3 error(s) during elaboration.
*** These modules were missing:
        parallel2serial referenced 1 times.
***
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial\n3 error(s) during elaboration.\n*** These modules were missing:\n        parallel2serial referenced 1 times.\n***\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_2 run_20260426_141859_833435_7c9834 ok ok failed skipped failed functional /workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_07\samples\run_20260426_141859_833435_7c9834__sample_2
generated.v preview 
module verified_parallel2serial(
    input clk,
    input rst_n,
    input [3:0] d,
    output reg valid_out,
    output reg dout
);

reg [3:0] data;
reg [1:0] cnt;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        data <= 4'b0000;
        cnt <= 2'b00;
        valid_out <= 1'b0;
        dout <= 1'b0;
    end else begin
        if (cnt == 2'b11) begin
            data <= d;
            cnt <= 2'b00;
            valid_out <= 1'b1;
            dout <= d[3];
        end else begin
            cnt <= cnt + 1;
            valid_out <= 1'b0;
            data <= {data[2:0], 1'b0};
            dout <= data[3];
        end
    end
end
...
functional details 
[stderr]
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
3 error(s) during elaboration.
*** These modules were missing:
        parallel2serial referenced 1 times.
***
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial\n3 error(s) during elaboration.\n*** These modules were missing:\n        parallel2serial referenced 1 times.\n***\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_3 run_20260424_203453_201510_6e98ce ok ok failed skipped failed functional /workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_07\samples\run_20260424_203453_201510_6e98ce__sample_3
generated.v preview 
module verified_parallel2serial(
    input clk,
    input rst_n,
    input [3:0] d,
    output reg valid_out,
    output reg dout
);

reg [3:0] data;
reg [1:0] cnt;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        data <= 4'b0000;
        cnt <= 2'b00;
        valid_out <= 1'b0;
        dout <= 1'b0;
    end else begin
        if (cnt == 2'b11) begin
            data <= d;
            cnt <= 2'b00;
            valid_out <= 1'b1;
            dout <= d[3];
        end else begin
            cnt <= cnt + 1;
            valid_out <= 1'b0;
            data <= {data[2:0], 1'b0};
            dout <= data[3];
        end
    end
end
...
functional details 
[stderr]
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
3 error(s) during elaboration.
*** These modules were missing:
        parallel2serial referenced 1 times.
***
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial\n3 error(s) during elaboration.\n*** These modules were missing:\n        parallel2serial referenced 1 times.\n***\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_3 run_20260424_230145_632624_082334 ok ok failed skipped failed functional /workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_07\samples\run_20260424_230145_632624_082334__sample_3
generated.v preview 
module verified_parallel2serial(
    input clk,
    input rst_n,
    input [3:0] d,
    output reg valid_out,
    output reg dout
);

reg [3:0] data;
reg [1:0] cnt;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        data <= 4'b0000;
        cnt <= 2'b00;
        valid_out <= 1'b0;
        dout <= 1'b0;
    end else begin
        if (cnt == 2'b11) begin
            data <= d;
            cnt <= 2'b00;
            valid_out <= 1'b1;
            dout <= d[3];
        end else begin
            cnt <= cnt + 1'b1;
            valid_out <= 1'b0;
            dout <= data[3];
            data <= data << 1;
        end
    end
end
...
functional details 
[stderr]
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
3 error(s) during elaboration.
*** These modules were missing:
        parallel2serial referenced 1 times.
***
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial\n3 error(s) during elaboration.\n*** These modules were missing:\n        parallel2serial referenced 1 times.\n***\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_3 run_20260426_141859_833435_7c9834 ok ok failed skipped failed functional /workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_07\samples\run_20260426_141859_833435_7c9834__sample_3
generated.v preview 
module verified_parallel2serial(
    input clk,
    input rst_n,
    input [3:0] d,
    output reg valid_out,
    output reg dout
);

reg [3:0] data;
reg [1:0] cnt;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        data <= 4'b0000;
        cnt <= 2'b00;
        valid_out <= 1'b0;
        dout <= 1'b0;
    end else begin
        if (cnt == 2'b11) begin
            data <= d;
            cnt <= 2'b00;
            valid_out <= 1'b1;
            dout <= d[3];
        end else begin
            cnt <= cnt + 1;
            valid_out <= 1'b0;
            dout <= data[3];
            data <= data << 1;
        end
    end
end
...
functional details 
[stderr]
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
3 error(s) during elaboration.
*** These modules were missing:
        parallel2serial referenced 1 times.
***
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial\n3 error(s) during elaboration.\n*** These modules were missing:\n        parallel2serial referenced 1 times.\n***\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_4 run_20260424_203453_201510_6e98ce ok ok failed skipped failed functional /workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_07\samples\run_20260424_203453_201510_6e98ce__sample_4
generated.v preview 
module verified_parallel2serial(
    input clk,
    input rst_n,
    input [3:0] d,
    output reg valid_out,
    output reg dout
);

reg [3:0] data;
reg [1:0] cnt;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        data <= 4'b0000;
        cnt <= 2'b00;
        valid_out <= 1'b0;
        dout <= 1'b0;
    end else begin
        if (cnt == 2'b11) begin
            data <= d;
            cnt <= 2'b00;
            valid_out <= 1'b1;
            dout <= d[3];
        end else begin
            cnt <= cnt + 1;
            valid_out <= 1'b0;
            data <= {data[2:0], 1'b0};
            dout <= data[3];
        end
    end
end
...
functional details 
[stderr]
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
3 error(s) during elaboration.
*** These modules were missing:
        parallel2serial referenced 1 times.
***
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial\n3 error(s) during elaboration.\n*** These modules were missing:\n        parallel2serial referenced 1 times.\n***\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_4 run_20260424_230145_632624_082334 ok ok failed skipped failed functional /workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_07\samples\run_20260424_230145_632624_082334__sample_4
generated.v preview 
module verified_parallel2serial(
    input clk,
    input rst_n,
    input [3:0] d,
    output reg valid_out,
    output reg dout
);

reg [3:0] data;
reg [1:0] cnt;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        data <= 4'b0000;
        cnt <= 2'b00;
        valid_out <= 1'b0;
        dout <= 1'b0;
    end else begin
        if (cnt == 2'b11) begin
            data <= d;
            cnt <= 2'b00;
            valid_out <= 1'b1;
            dout <= d[3];
        end else begin
            cnt <= cnt + 1'b1;
            valid_out <= 1'b0;
            dout <= data[3];
            data <= data << 1;
        end
    end
end
...
functional details 
[stderr]
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
3 error(s) during elaboration.
*** These modules were missing:
        parallel2serial referenced 1 times.
***
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial\n3 error(s) during elaboration.\n*** These modules were missing:\n        parallel2serial referenced 1 times.\n***\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_4 run_20260426_141859_833435_7c9834 ok ok failed skipped failed functional /workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_07\samples\run_20260426_141859_833435_7c9834__sample_4
generated.v preview 
module verified_parallel2serial(
    input clk,
    input rst_n,
    input [3:0] d,
    output reg valid_out,
    output reg dout
);

reg [3:0] data;
reg [1:0] cnt;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        data <= 4'b0000;
        cnt <= 2'b00;
        valid_out <= 1'b0;
        dout <= 1'b0;
    end else begin
        if (cnt == 2'b11) begin
            data <= d;
            cnt <= 2'b00;
            valid_out <= 1'b1;
            dout <= d[3];
        end else begin
            cnt <= cnt + 1;
            valid_out <= 1'b0;
            dout <= data[3];
            data <= data << 1;
        end
    end
end
...
functional details 
[stderr]
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
3 error(s) during elaboration.
*** These modules were missing:
        parallel2serial referenced 1 times.
***
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial\n3 error(s) during elaboration.\n*** These modules were missing:\n        parallel2serial referenced 1 times.\n***\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_5 run_20260424_203453_201510_6e98ce ok ok failed skipped failed functional /workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_07\samples\run_20260424_203453_201510_6e98ce__sample_5
generated.v preview 
module verified_parallel2serial(
    input clk,
    input rst_n,
    input [3:0] d,
    output reg valid_out,
    output reg dout
);

reg [3:0] data;
reg [1:0] cnt;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        data <= 4'b0000;
        cnt <= 2'b00;
        valid_out <= 1'b0;
        dout <= 1'b0;
    end else begin
        if (cnt == 2'd3) begin
            data <= d;
            cnt <= 2'd0;
            valid_out <= 1'b1;
            dout <= d[3];
        end else begin
            cnt <= cnt + 1'b1;
            valid_out <= 1'b0;
            data <= {data[2:0], 1'b0};
            dout <= data[3];
        end
    end
end
...
functional details 
[stderr]
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
3 error(s) during elaboration.
*** These modules were missing:
        parallel2serial referenced 1 times.
***
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial\n3 error(s) during elaboration.\n*** These modules were missing:\n        parallel2serial referenced 1 times.\n***\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_5 run_20260424_230145_632624_082334 ok ok failed skipped failed functional /workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_07\samples\run_20260424_230145_632624_082334__sample_5
generated.v preview 
module verified_parallel2serial(
    input clk,
    input rst_n,
    input [3:0] d,
    output reg valid_out,
    output reg dout
);

reg [3:0] data;
reg [1:0] cnt;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        data <= 4'b0000;
        cnt <= 2'b00;
        valid_out <= 1'b0;
        dout <= 1'b0;
    end else begin
        if (cnt == 2'b11) begin
            data <= d;
            cnt <= 2'b00;
            valid_out <= 1'b1;
            dout <= d[3];
        end else begin
            cnt <= cnt + 1'b1;
            valid_out <= 1'b0;
            dout <= data[3];
            data <= data << 1;
        end
    end
end
...
functional details 
[stderr]
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
3 error(s) during elaboration.
*** These modules were missing:
        parallel2serial referenced 1 times.
***
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial\n3 error(s) during elaboration.\n*** These modules were missing:\n        parallel2serial referenced 1 times.\n***\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_5 run_20260426_141859_833435_7c9834 ok ok failed skipped failed functional /workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_07\samples\run_20260426_141859_833435_7c9834__sample_5
generated.v preview 
module verified_parallel2serial(
    input clk,
    input rst_n,
    input [3:0] d,
    output reg valid_out,
    output reg dout
);

reg [3:0] data;
reg [1:0] cnt;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        data <= 4'b0000;
        cnt <= 2'b00;
        valid_out <= 1'b0;
        dout <= 1'b0;
    end else begin
        if (cnt == 2'b11) begin
            data <= d;
            cnt <= 2'b00;
            valid_out <= 1'b1;
            dout <= d[3];
        end else begin
            cnt <= cnt + 1;
            valid_out <= 1'b0;
            dout <= data[3];
            data <= data << 1;
        end
    end
end
...
functional details 
[stderr]
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
3 error(s) during elaboration.
*** These modules were missing:
        parallel2serial referenced 1 times.
***
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial\n3 error(s) during elaboration.\n*** These modules were missing:\n        parallel2serial referenced 1 times.\n***\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_6 run_20260424_203453_201510_6e98ce ok ok failed skipped failed functional /workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_07\samples\run_20260424_203453_201510_6e98ce__sample_6
generated.v preview 
module verified_parallel2serial(
    input clk,
    input rst_n,
    input [3:0] d,
    output reg valid_out,
    output reg dout
);

reg [3:0] data;
reg [1:0] cnt;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        data <= 4'b0000;
        cnt <= 2'b00;
        valid_out <= 1'b0;
        dout <= 1'b0;
    end else begin
        if (cnt == 2'd3) begin
            data <= d;
            cnt <= 2'd0;
            valid_out <= 1'b1;
            dout <= d[3];
        end else begin
            cnt <= cnt + 1'b1;
            valid_out <= 1'b0;
            data <= {data[2:0], 1'b0};
            dout <= data[3];
        end
    end
end
...
functional details 
[stderr]
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
3 error(s) during elaboration.
*** These modules were missing:
        parallel2serial referenced 1 times.
***
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial\n3 error(s) during elaboration.\n*** These modules were missing:\n        parallel2serial referenced 1 times.\n***\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_6 run_20260424_230145_632624_082334 ok ok failed skipped failed functional /workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_07\samples\run_20260424_230145_632624_082334__sample_6
generated.v preview 
module verified_parallel2serial(
    input clk,
    input rst_n,
    input [3:0] d,
    output reg valid_out,
    output reg dout
);

reg [3:0] data;
reg [1:0] cnt;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        data <= 4'b0000;
        cnt <= 2'b00;
        valid_out <= 1'b0;
        dout <= 1'b0;
    end else begin
        if (cnt == 2'b11) begin
            data <= d;
            cnt <= 2'b00;
            valid_out <= 1'b1;
            dout <= d[3];
        end else begin
            cnt <= cnt + 1'b1;
            valid_out <= 1'b0;
            dout <= data[3];
            data <= data << 1;
        end
    end
end
...
functional details 
[stderr]
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
3 error(s) during elaboration.
*** These modules were missing:
        parallel2serial referenced 1 times.
***
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial\n3 error(s) during elaboration.\n*** These modules were missing:\n        parallel2serial referenced 1 times.\n***\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_6 run_20260426_141859_833435_7c9834 ok ok failed skipped failed functional /workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_07\samples\run_20260426_141859_833435_7c9834__sample_6
generated.v preview 
module verified_parallel2serial(
    input clk,
    input rst_n,
    input [3:0] d,
    output reg valid_out,
    output reg dout
);

reg [3:0] data;
reg [1:0] cnt;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        data <= 4'b0000;
        cnt <= 2'b00;
        valid_out <= 1'b0;
        dout <= 1'b0;
    end else begin
        if (cnt == 2'b11) begin
            data <= d;
            cnt <= 2'b00;
            valid_out <= 1'b1;
            dout <= d[3];
        end else begin
            cnt <= cnt + 1;
            valid_out <= 1'b0;
            data <= {data[2:0], 1'b0};
            dout <= data[3];
        end
    end
end
...
functional details 
[stderr]
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
3 error(s) during elaboration.
*** These modules were missing:
        parallel2serial referenced 1 times.
***
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial\n3 error(s) during elaboration.\n*** These modules were missing:\n        parallel2serial referenced 1 times.\n***\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_7 run_20260424_203453_201510_6e98ce ok ok failed skipped failed functional /workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_07\samples\run_20260424_203453_201510_6e98ce__sample_7
generated.v preview 
module verified_parallel2serial(
    input clk,
    input rst_n,
    input [3:0] d,
    output reg valid_out,
    output reg dout
);

reg [3:0] data;
reg [1:0] cnt;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        data <= 4'b0000;
        cnt <= 2'b00;
        valid_out <= 1'b0;
        dout <= 1'b0;
    end else begin
        if (cnt == 2'b11) begin
            data <= d;
            cnt <= 2'b00;
            valid_out <= 1'b1;
            dout <= d[3];
        end else begin
            cnt <= cnt + 1;
            valid_out <= 1'b0;
            data <= {data[2:0], 1'b0};
            dout <= data[3];
        end
    end
end
...
functional details 
[stderr]
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
3 error(s) during elaboration.
*** These modules were missing:
        parallel2serial referenced 1 times.
***
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial\n3 error(s) during elaboration.\n*** These modules were missing:\n        parallel2serial referenced 1 times.\n***\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_7 run_20260424_230145_632624_082334 ok ok failed skipped failed functional /workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_07\samples\run_20260424_230145_632624_082334__sample_7
generated.v preview 
module verified_parallel2serial(
    input clk,
    input rst_n,
    input [3:0] d,
    output reg valid_out,
    output reg dout
);

reg [3:0] data;
reg [1:0] cnt;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        data <= 4'b0000;
        cnt <= 2'b00;
        valid_out <= 1'b0;
        dout <= 1'b0;
    end else begin
        if (cnt == 2'b11) begin
            data <= d;
            cnt <= 2'b00;
            valid_out <= 1'b1;
            dout <= d[3];
        end else begin
            cnt <= cnt + 1'b1;
            valid_out <= 1'b0;
            dout <= data[3];
            data <= data << 1;
        end
    end
end
...
functional details 
[stderr]
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
3 error(s) during elaboration.
*** These modules were missing:
        parallel2serial referenced 1 times.
***
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial\n3 error(s) during elaboration.\n*** These modules were missing:\n        parallel2serial referenced 1 times.\n***\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_7 run_20260426_141859_833435_7c9834 ok ok failed skipped failed functional /workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_07\samples\run_20260426_141859_833435_7c9834__sample_7
generated.v preview 
module verified_parallel2serial(
    input clk,
    input rst_n,
    input [3:0] d,
    output reg valid_out,
    output reg dout
);

reg [3:0] data;
reg [1:0] cnt;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        data <= 4'b0000;
        cnt <= 2'b00;
        valid_out <= 1'b0;
        dout <= 1'b0;
    end else begin
        if (cnt == 2'b11) begin
            data <= d;
            cnt <= 2'b00;
            valid_out <= 1'b1;
            dout <= d[3];
        end else begin
            cnt <= cnt + 1;
            valid_out <= 1'b0;
            dout <= data[3];
            data <= data << 1;
        end
    end
end
...
functional details 
[stderr]
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
3 error(s) during elaboration.
*** These modules were missing:
        parallel2serial referenced 1 times.
***
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial\n3 error(s) during elaboration.\n*** These modules were missing:\n        parallel2serial referenced 1 times.\n***\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_8 run_20260424_203453_201510_6e98ce ok ok failed skipped failed functional /workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_07\samples\run_20260424_203453_201510_6e98ce__sample_8
generated.v preview 
module verified_parallel2serial(
    input clk,
    input rst_n,
    input [3:0] d,
    output reg valid_out,
    output reg dout
);

reg [3:0] data;
reg [1:0] cnt;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        data <= 4'b0000;
        cnt <= 2'b00;
        valid_out <= 1'b0;
        dout <= 1'b0;
    end else begin
        if (cnt == 2'd3) begin
            data <= d;
            cnt <= 2'b0;
            valid_out <= 1'b1;
            dout <= d[3];
        end else begin
            cnt <= cnt + 1'b1;
            valid_out <= 1'b0;
            data <= {data[2:0], 1'b0};
            dout <= data[3];
        end
    end
end
...
functional details 
[stderr]
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
3 error(s) during elaboration.
*** These modules were missing:
        parallel2serial referenced 1 times.
***
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial\n3 error(s) during elaboration.\n*** These modules were missing:\n        parallel2serial referenced 1 times.\n***\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_8 run_20260424_230145_632624_082334 ok ok failed skipped failed functional /workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_07\samples\run_20260424_230145_632624_082334__sample_8
generated.v preview 
module verified_parallel2serial(
    input clk,
    input rst_n,
    input [3:0] d,
    output reg valid_out,
    output reg dout
);

reg [3:0] data;
reg [1:0] cnt;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        data <= 4'b0000;
        cnt <= 2'b00;
        valid_out <= 1'b0;
        dout <= 1'b0;
    end else begin
        if (cnt == 2'b11) begin
            data <= d;
            cnt <= 2'b00;
            valid_out <= 1'b1;
            dout <= d[3];
        end else begin
            cnt <= cnt + 1'b1;
            valid_out <= 1'b0;
            dout <= data[3];
            data <= data << 1;
        end
    end
end
...
functional details 
[stderr]
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
3 error(s) during elaboration.
*** These modules were missing:
        parallel2serial referenced 1 times.
***
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial\n3 error(s) during elaboration.\n*** These modules were missing:\n        parallel2serial referenced 1 times.\n***\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_8 run_20260426_141859_833435_7c9834 ok ok failed skipped failed functional /workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_07\samples\run_20260426_141859_833435_7c9834__sample_8
generated.v preview 
module verified_parallel2serial(
    input clk,
    input rst_n,
    input [3:0] d,
    output reg valid_out,
    output reg dout
);

reg [3:0] data;
reg [1:0] cnt;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        data <= 4'b0000;
        cnt <= 2'b00;
        valid_out <= 1'b0;
        dout <= 1'b0;
    end else begin
        if (cnt == 2'b11) begin
            data <= d;
            cnt <= 2'b00;
            valid_out <= 1'b1;
            dout <= d[3];
        end else begin
            cnt <= cnt + 1;
            valid_out <= 1'b0;
            dout <= data[3];
            data <= data << 1;
        end
    end
end
...
functional details 
[stderr]
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
3 error(s) during elaboration.
*** These modules were missing:
        parallel2serial referenced 1 times.
***
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial\n3 error(s) during elaboration.\n*** These modules were missing:\n        parallel2serial referenced 1 times.\n***\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_9 run_20260424_203453_201510_6e98ce ok ok failed skipped failed functional /workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_07\samples\run_20260424_203453_201510_6e98ce__sample_9
generated.v preview 
module verified_parallel2serial(
    input clk,
    input rst_n,
    input [3:0] d,
    output reg valid_out,
    output reg dout
);

reg [3:0] data;
reg [1:0] cnt;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        data <= 4'b0000;
        cnt <= 2'b00;
        valid_out <= 1'b0;
        dout <= 1'b0;
    end else begin
        if (cnt == 2'b11) begin
            data <= d;
            cnt <= 2'b00;
            valid_out <= 1'b1;
            dout <= d[3];
        end else begin
            cnt <= cnt + 1;
            valid_out <= 1'b0;
            data <= {data[2:0], 1'b0};
            dout <= data[3];
        end
    end
end
...
functional details 
[stderr]
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
3 error(s) during elaboration.
*** These modules were missing:
        parallel2serial referenced 1 times.
***
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial\n3 error(s) during elaboration.\n*** These modules were missing:\n        parallel2serial referenced 1 times.\n***\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_9 run_20260424_230145_632624_082334 ok ok failed skipped failed functional /workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_07\samples\run_20260424_230145_632624_082334__sample_9
generated.v preview 
module verified_parallel2serial(
    input clk,
    input rst_n,
    input [3:0] d,
    output reg valid_out,
    output reg dout
);

reg [3:0] data;
reg [1:0] cnt;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        data <= 4'b0000;
        cnt <= 2'b00;
        valid_out <= 1'b0;
        dout <= 1'b0;
    end else begin
        if (cnt == 2'b11) begin
            data <= d;
            cnt <= 2'b00;
            valid_out <= 1'b1;
            dout <= d[3];
        end else begin
            cnt <= cnt + 1'b1;
            valid_out <= 1'b0;
            dout <= data[3];
            data <= data << 1;
        end
    end
end
...
functional details 
[stderr]
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
3 error(s) during elaboration.
*** These modules were missing:
        parallel2serial referenced 1 times.
***
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial\n3 error(s) during elaboration.\n*** These modules were missing:\n        parallel2serial referenced 1 times.\n***\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_9 run_20260426_141859_833435_7c9834 ok ok failed skipped failed functional /workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_07\samples\run_20260426_141859_833435_7c9834__sample_9
generated.v preview 
module verified_parallel2serial(
    input clk,
    input rst_n,
    input [3:0] d,
    output reg valid_out,
    output reg dout
);

reg [3:0] data;
reg [1:0] cnt;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        data <= 4'b0000;
        cnt <= 2'b00;
        valid_out <= 1'b0;
        dout <= 1'b0;
    end else begin
        if (cnt == 2'b11) begin
            data <= d;
            cnt <= 2'b00;
            valid_out <= 1'b1;
            dout <= d[3];
        end else begin
            cnt <= cnt + 1;
            valid_out <= 1'b0;
            dout <= data[3];
            data <= data << 1;
        end
    end
end
...
functional details 
[stderr]
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
3 error(s) during elaboration.
*** These modules were missing:
        parallel2serial referenced 1 times.
***
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial\n3 error(s) during elaboration.\n*** These modules were missing:\n        parallel2serial referenced 1 times.\n***\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_10 run_20260424_203453_201510_6e98ce ok ok failed skipped failed functional /workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_07\samples\run_20260424_203453_201510_6e98ce__sample_10
generated.v preview 
module verified_parallel2serial(
    input clk,
    input rst_n,
    input [3:0] d,
    output reg valid_out,
    output reg dout
);

reg [3:0] data;
reg [1:0] cnt;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        data <= 4'b0000;
        cnt <= 2'b00;
        valid_out <= 1'b0;
        dout <= 1'b0;
    end else begin
        if (cnt == 2'd3) begin
            data <= d;
            cnt <= 2'd0;
            valid_out <= 1'b1;
            dout <= d[3];
        end else begin
            cnt <= cnt + 1'b1;
            valid_out <= 1'b0;
            data <= {data[2:0], 1'b0};
            dout <= data[3];
        end
    end
end
...
functional details 
[stderr]
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
3 error(s) during elaboration.
*** These modules were missing:
        parallel2serial referenced 1 times.
***
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial\n3 error(s) during elaboration.\n*** These modules were missing:\n        parallel2serial referenced 1 times.\n***\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_10 run_20260424_230145_632624_082334 ok ok failed skipped failed functional /workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_07\samples\run_20260424_230145_632624_082334__sample_10
generated.v preview 
module verified_parallel2serial(
    input clk,
    input rst_n,
    input [3:0] d,
    output reg valid_out,
    output reg dout
);

reg [3:0] data;
reg [1:0] cnt;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        data <= 4'b0000;
        cnt <= 2'b00;
        valid_out <= 1'b0;
        dout <= 1'b0;
    end else begin
        if (cnt == 2'b11) begin
            data <= d;
            cnt <= 2'b00;
            valid_out <= 1'b1;
            dout <= d[3];
        end else begin
            cnt <= cnt + 1'b1;
            valid_out <= 1'b0;
            dout <= data[3];
            data <= data << 1;
        end
    end
end
...
functional details 
[stderr]
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
3 error(s) during elaboration.
*** These modules were missing:
        parallel2serial referenced 1 times.
***
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial\n3 error(s) during elaboration.\n*** These modules were missing:\n        parallel2serial referenced 1 times.\n***\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}
sample_10 run_20260426_141859_833435_7c9834 ok ok failed skipped failed functional /workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
Open details
sample_dir: E:\Work\MIEM\VKR\Analyse\data\model_dataset\models\qwen3-coder-30b\rag_on\benchmarks\rtllm\tasks\rtllm__13_rtllm_miscellaneous__task_07\samples\run_20260426_141859_833435_7c9834__sample_10
generated.v preview 
module verified_parallel2serial(
    input clk,
    input rst_n,
    input [3:0] d,
    output reg valid_out,
    output reg dout
);

reg [3:0] data;
reg [1:0] cnt;

always @(posedge clk or negedge rst_n) begin
    if (!rst_n) begin
        data <= 4'b0000;
        cnt <= 2'b00;
        valid_out <= 1'b0;
        dout <= 1'b0;
    end else begin
        if (cnt == 2'b11) begin
            data <= d;
            cnt <= 2'b00;
            valid_out <= 1'b1;
            dout <= d[3];
        end else begin
            cnt <= cnt + 1;
            valid_out <= 1'b0;
            dout <= data[3];
            data <= data << 1;
        end
    end
end
...
functional details 
[stderr]
/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial
3 error(s) during elaboration.
*** These modules were missing:
        parallel2serial referenced 1 times.
***
synthesis details 
[error]
None
errors[] 
[
  {
    "stage": "functional",
    "code": "functional.testbench_failed",
    "message": "/workspace/banchmarks/rtllm/13_rtllm_miscellaneous/task_07/tb.v:11: error: Unknown module type: parallel2serial\n3 error(s) during elaboration.\n*** These modules were missing:\n        parallel2serial referenced 1 times.\n***\n",
    "retryable": false,
    "details": {}
  }
]
outcome 
{
  "llm_ok": true,
  "extract_ok": true,
  "syntax_ok": true,
  "functional_ok": false,
  "openlane_ok": false,
  "syntax_required": true,
  "functional_required": true,
  "openlane_required": true,
  "final_success": false,
  "success": false
}